FS - Carver, AMC, Adcom, , JBL, etc

gidrah
gidrah Posts: 3,049
edited November 2005 in Flea Market
It's time to clean house and pay some bills. Unfortunately my camera took a dump on me trying to take a pic of the Nordost wires some time back. I can assure you that every piece has been well kept and that any imperfections would only be found under heavy scrutiny.

(SOLD) Carver M200t amp with manual. I'm looking for $140 shipped. I put about 5 hrs on it since buying it.

(SOLD) AMC 1100 preamp with manual and original packaging. I'm looking for $75 shipped. This is a heck of a good sounding preamp. It does not have phono or remote but sounds really nice.

Adcom GFP-555 preamp with manual. I'm looking for $130 shipped. I've only used this one for about 1/2hr and will probably always wonder how well it sounded.

Telefunken TD-7 microphone in box. $30 shipped. I have 2 of these. They use 3 prongs on a DIN connector

Sansui TU-3900 Tuner. $40 shipped. Black faced analog tuner. Somebody engraved some numbers (ph#, SS#,?) in the upper right had corner. I have it covered with electrical tape right now and while it is noticable, it doesn't jump out at you either.

Akai X-100D Reel-to-reel. $60 shipped (it's heavy). I haven't checked this one out beyond saying that the motors spin. It takes 7" reels and I'll throw in a pair of phone/RCA connectors

JBL C54 Trimlines. $420 shipped. The cabinets look good on most sides as do the grills, but to be honest some sides look a little rough. These are the much more rarer version of the Lancer 44. They are even rarer in that the PRs do not have the chrome dustcap. The original surrounds are intact but cracked. They sound good as-is but I will include a set of 4 JBL surrounds also.

I also have some turntables and speakers available for local pick up too.

Edit - Shipping only within the continental US at this time.
Make it Funky! :)
Post edited by gidrah on
· Share on FacebookShare on Twitter

Comments

  • warlocks1
    warlocks1 Posts: 1,253
    edited October 2004
    gidrah, I am thinking about the Carver. Can you look tell me the bridged power on it? I am not calling dibs, or hold while I think about it. I am not "in line", yet. Just asking a question. Thanks, Jeff
    · Share on FacebookShare on Twitter
  • hotwheelman
    hotwheelman Posts: 1,300
    edited October 2004
    You got p.m.
    "Its worked so far but we're not out yet."
    "Hey big man let me hold a dollar"
    · Share on FacebookShare on Twitter
  • Phil Dawson
    Phil Dawson Posts: 288
    edited October 2004
    Could you please give me some information about the microphones? I've not been able to find out anything about them. Thanks, Phil
    · Share on FacebookShare on Twitter
  • Toxis
    Toxis Posts: 5,116
    edited October 2004
    specs on the Carver?
    Never kick a fresh **** on a hot day.

    Home Setup: Sony VPL-VW85 Projo, 92" Stewart Firehawk, Pioneer Elite SC-65, PS3, RTi12 fronts, CSi5, FXi6 rears, RTi6 surround backs, RTi4 height, MFW-15 Subwoofer.

    Car Setup: OEM Radio, RF 360.2v2, Polk SR6500 quad amped off 4 Xtant 1.1 100w mono amps, Xtant 6.1 to run an eD 13av.2, all Stinger wiring and Raammat deadener.
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,576
    edited October 2004
    Originally posted by Toxis
    specs on the Carver?

    Made by Bob....Bob Carver...thank you folks.....I'm here all night, now stay tuned for the miscellaneous ramblings of TOOOOOOOUUUUUURRRRR 2MA!
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited October 2004
    Originally posted by dorokusai
    Made by Bob....Bob Carver...thank you folks.....I'm here all night, now stay tuned for the miscellaneous ramblings of TOOOOOOOUUUUUURRRRR 2MA!
    :rolleyes:
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • BlueMDPicker
    BlueMDPicker Posts: 7,569
    edited October 2004
    Originally posted by dorokusai
    ......now stay tuned for the miscellaneous ramblings of TOOOOOOOUUUUUURRRRR 2MA!

    :p:p:p

    How about: the ubiquitous ramblings of Tour2ma!
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited October 2004
    The Carver is sold. I'll still give the specs later tonight. I'm at work right now.
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited October 2004
    For those that were interested in the Carver specs:

    120W rms /ch into 8ohm (20-20) with no more than 0.15% THD
    130W rms /ch into 8ohm at 1khz
    200W rms /ch into 4ohm at 1kHz
    350W mono brided into 8ohm at 1kHz
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited October 2004
    Originally posted by Phil Dawson
    Could you please give me some information about the microphones? I've not been able to find out anything about them. Thanks, Phil

    Unfortuantely I haven't been able to find out anything either. I saw some on e-bay a few months ago but they no longer show in the completed auction. They are about 5 inches long, dark brown plastic (bakelite?) housing with tan accents and the Telefunken logo on top. The receiving end is about 1" square, metal screened, and is almost flush with the housing. They have a removable stand that sits about 4" high and there is also a threaded hole in the bottom.

    I doubt they are very high-end or anything, but they should work well and one might round out somebody's Telefunken recorder.
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • hotwheelman
    hotwheelman Posts: 1,300
    edited November 2004
    Gidrah,


    Little green things comin at ya soon.


    Troy,


    Have the green ones left there yet? :D
    "Its worked so far but we're not out yet."
    "Hey big man let me hold a dollar"
    · Share on FacebookShare on Twitter
  • jdhdiggs
    jdhdiggs Posts: 4,305
    edited November 2004
    Damn no home internet connection!!!!
    There is no genuine justice in any scheme of feeding and coddling the loafer whose only ponderable energies are devoted wholly to reproduction. Nine-tenths of the rights he bellows for are really privileges and he does nothing to deserve them. We not only acquired a vast population of morons, we have inculcated all morons, old or young, with the doctrine that the decent and industrious people of the country are bound to support them for all time.-Menkin
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited November 2004
    Don't you be sending me aliens or boogers now. It will be gong out today or tomorrow.

    The AMC will be going out as soon as I get a freaking PM reply from the lucky new owner.
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited November 2004
    I can go $115 shipped for the Adcom and $400 shipped for the JBLs. I can go $25 shipped on the mics. Phil, If you want one of these mics, send me a PM and we can work something out.

    If I don't set anything up with anybody this week I will put this stuff up for sale elsewhere or back in the closet.
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited November 2004
    do you have any specs on the Sansui TU3900 tuna? I could use a analog tuner.. but, i'm kinda picky when it comes to sound for FM listening.

    I looked on the internet for info... and couldn't find much...

    Al
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • Crazed
    Crazed Posts: 60
    edited November 2004
    Turntables???? :p
    Main System:
    PreAmp: Rotel 1098 with MF X-10v3
    Amp: Rotel 1090, 1075, 1070
    Source: Pro-Ject RM9 with Blackbird Cart., Denon 2900 with MF X-DACv3
    Speakers: Gallo Ref 3s (LR), Gallo Due (C, SR, SL), Gallo Micro (RR, RL)


    Second System:
    Receiver: H/K AVR 630
    Source: Pioneer 563
    Speakers: Polk RTi10s (LR), CSi5 (C), RTR 200 (SR, SL)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited November 2004
    Al - This puppy was made in the late 70s and is capable of frequency or amplitude modulation. Other than that I don't know anything about it. I listened to it a little when I first got it and can't honestly comment on the sound quality but I do remember it being able to grab and hold stations pretty good.
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=3282&item=5730705222&rd=1

    Crazed - Would you prefer I said phonograph or record player?
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited November 2004
    Originally posted by gidrah
    Al - This puppy was made in the late 70s and is capable of frequency or amplitude modulation. Other than that I don't know anything about it. I listened to it a little when I first got it and can't honestly comment on the sound quality but I do remember it being able to grab and hold stations pretty good.
    http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&category=3282&item=5730705222&rd=1

    Crazed - Would you prefer I said phonograph or record player?

    thanks
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • Crazed
    Crazed Posts: 60
    edited November 2004
    Sorry... That was supposed to indicate my appreciation for the medium and interest in what you might have available...

    I guess I'm being too cryptic... :(
    Main System:
    PreAmp: Rotel 1098 with MF X-10v3
    Amp: Rotel 1090, 1075, 1070
    Source: Pro-Ject RM9 with Blackbird Cart., Denon 2900 with MF X-DACv3
    Speakers: Gallo Ref 3s (LR), Gallo Due (C, SR, SL), Gallo Micro (RR, RL)


    Second System:
    Receiver: H/K AVR 630
    Source: Pioneer 563
    Speakers: Polk RTi10s (LR), CSi5 (C), RTR 200 (SR, SL)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited November 2005
    Let's try $320 for the JBLs
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • candyliquor35m
    candyliquor35m Posts: 2,267
    edited November 2005
    I'm not up to date on Adcom. Does it have a remote?
    · Share on FacebookShare on Twitter
  • george daniel
    george daniel Posts: 12,096
    edited November 2005
    I thought that remote controlled pre's were illegal in Texas :D
    JC approves....he told me so. (F-1 nut)
    · Share on FacebookShare on Twitter
  • capecodder
    capecodder Posts: 613
    edited November 2005
    danger boy wrote:
    do you have any specs on the Sansui TU3900 tuna? I could use a analog tuner.. but, i'm kinda picky when it comes to sound for FM listening.

    I looked on the internet for info... and couldn't find much...

    Al

    If you are not familiar with this tuner site, check it out. Surprisingly though it doesn't have info for this model.

    http://www.fmtunerinfo.com/sansui.html
    · Share on FacebookShare on Twitter
  • candyliquor35m
    candyliquor35m Posts: 2,267
    edited November 2005
    george daniel wrote:
    I thought that remote controlled pre's were illegal in Texas :D

    That's only when riding a horse :)
    · Share on FacebookShare on Twitter
  • gidrah
    gidrah Posts: 3,049
    edited November 2005
    Sorry, no remote on the Adcom.
    Make it Funky! :)
    · Share on FacebookShare on Twitter
  • MrNightly
    MrNightly Posts: 3,370
    edited November 2005
    Do you recommend the Adcom 555 with say, a pre/pro outlaw 990?
    Honoured to be, an original SOPA founding member
    Stuff...

    RTi12's - front
    CSi5 - center
    FXi3's - surrounds
    RTi4's - surrounds
    SVS PB12-NSD/2 - sub :D:D:D
    Denon 3805
    Rotel RB-985 5-Channel Amplifier

    · Share on FacebookShare on Twitter