RTi 8 or the 10...???

Burnzy
Burnzy Posts: 250
edited July 2004 in Speakers
Ok, I have a chance to pick up the 8's but wanted to know if the extra $40 each for the 10's would be worth it? Also, I'll be getting the FXi 3's.

CC has some blow out prices so I'll be helping myself to some fronts and surrounds tomorrow. :D

I know the 10's have a bit more bass but I will be mainly using my set up for HT and I already have a sub.

Thanks,
SYSTEM
HDTV ..........Sony KP-57WV600
CD / DVD......Sony DVP-C675D
AVR ............Denon 2801
MAINS .........Polk RTi8
CENTER .......Polk CSi5
Surrounds ....Polk FXi3
Sub ............Polk PSW-250
Cables.........Zebra Cables
Post edited by Burnzy on

Comments

  • Skippy54
    Skippy54 Posts: 35
    edited July 2004
    Burnzy,
    Have you had a chance to listen to both? When I purchased my RTi8's I listened to both the 8s and the 10s. I thought the 8's had better mids and high. Since you already have a sub, I would stay with the 8s. Either way you will be happy. ;)
  • Dennis Gardner
    Dennis Gardner Posts: 4,861
    edited July 2004
    A couple of reasons to get the 10's come to mind for me:

    Will you ever be using the mains for music only w/o a sub? If so, buy the 10's since they have better bass.

    Since you have a relatively small sub, setting the mains to large may help with HT bass impact.


    The only drawback that I see to having 10's is that your 2801 may be pushed closer to its power limits with the larger woofers.

    I know that in my quest for great HT I always seem to buy the most I can afford, since I tend to upgrade later anyway.

    Either really will do nicely with what you have now,

    Dennis
    HT Optoma HD25 LV on 80" DIY Screen, Anthem MRX 300 Receiver, Pioneer Elite BDP 51FD Polk CS350LS, Polk SDA1C, Polk FX300, Polk RT55, Dual EBS Adire Shiva 320watt tuned to 17hz, ICs-DIY Twisted Prs, Speaker-Raymond Cable

    2 Channel Thorens TD 318 Grado ZF1, SACD/CD Marantz 8260, Soundstream/Krell DAC1, Audio Mirror PP1, Odyssey Stratos, ADS L-1290, ICs-DIY Twisted , Speaker-Raymond Cable
  • Burnzy
    Burnzy Posts: 250
    edited July 2004
    Skippy,
    No, I haven't had the chance to listen to them both, side by side. From what I've read on this forum, everybody seems to agree that the 8's are better for the mid's and high's.

    The room is not that big but for the price, I'm thinkin' 10's. In the future, I plan to use the pre-outs on the Denon and add seperate amps for the front & center channels (possilbly Outlaws) then use the Denon to power the surrounds.

    Dennis,
    I do use it to listen to two channel every now and then when I get a chance. And Like I said I plan on adding amps, so maybe I'll get the 10's.

    :D
    SYSTEM
    HDTV ..........Sony KP-57WV600
    CD / DVD......Sony DVP-C675D
    AVR ............Denon 2801
    MAINS .........Polk RTi8
    CENTER .......Polk CSi5
    Surrounds ....Polk FXi3
    Sub ............Polk PSW-250
    Cables.........Zebra Cables
  • Early B.
    Early B. Posts: 7,900
    edited July 2004
    Get the 8's and upgrade the sub sometime in the future.
    HT/2-channel Rig: Sony 50” LCD TV; Toshiba HD-A2 DVD player; Emotiva LMC-1 pre/pro; Rogue Audio M-120 monoblocks (modded); Placette RVC; Emotiva LPA-1 amp; Bada HD-22 tube CDP (modded); VMPS Tower II SE (fronts); DIY Clearwave Dynamic 4CC (center); Wharfedale Opus Tri-Surrounds (rear); and VMPS 215 sub

    "God grooves with tubes."
  • Burnzy
    Burnzy Posts: 250
    edited July 2004
    Ok, I got the 8's and the FXi 3's. I really didn't have that much of a budget but for the prices, I just couldn't pass these up.

    After calling several CC's in the area and getting drastically different closeout prices from each I finally found a deal. I went to the CC in Northridge, CA. Here are the deals I got:

    RTi 8 = $148.99 ea. NIB.
    FXi 3 = $159.99 for the pair. Open Box, some scratches at the bottom.

    :D

    They still had two pair, one NIB, other Open box of the RTi8's.

    RTi 10 = $189 ea. NIB. I think two pairs left and the floor models.

    RTi 12 but didn't ask the price or how many left, they did have the floor models though.

    If you go tell em' you were quoted these prices by John, otherwise you will be charged what the shelf tag reads. For instance when I got there this morning, John wasn't in yet and they tried to charge me $209.99 for the OB pair of the FXi3's. I told them John had quoted me a price of $159 for the pair and that's what they charged me.
    SYSTEM
    HDTV ..........Sony KP-57WV600
    CD / DVD......Sony DVP-C675D
    AVR ............Denon 2801
    MAINS .........Polk RTi8
    CENTER .......Polk CSi5
    Surrounds ....Polk FXi3
    Sub ............Polk PSW-250
    Cables.........Zebra Cables
  • SniperREX
    SniperREX Posts: 930
    edited July 2004
    Originally posted by Burnzy


    RTi 8 = $148.99 ea. NIB.

    What a steal :) !

    I paid $349 ea about 2 months ago :mad: . I was about to return them to Fry's, but at my local CC they were dumping only floor models and they don't have the cherry finish :(.


    TVs: Samsung S95B 65" QD-OLED (den) and LG C2 42" OLED (office)
    Receiver: Denon AVR-X3700H (den) and Denon AVR-X2300W (den)
    SACD and DVD-A player: Oppo BDP-83
    Mains: Polk RTi8 (den) and Dali Ikon 8 (office)
    Center: Polk CSi5 (den) and Polk CSi3 (office)
    Surrounds: Polk FXi5 (den) and Velodyne surrounds (office)
    Sub: SVS PB-2000 (den) and PCi 16-46 (office)
  • Dennis Gardner
    Dennis Gardner Posts: 4,861
    edited July 2004
    Enjoy your new Polks, take care of them and they should last you for years of great sound!

    Closeouts are making these RTis some of the best deals in a long while.


    DG
    HT Optoma HD25 LV on 80" DIY Screen, Anthem MRX 300 Receiver, Pioneer Elite BDP 51FD Polk CS350LS, Polk SDA1C, Polk FX300, Polk RT55, Dual EBS Adire Shiva 320watt tuned to 17hz, ICs-DIY Twisted Prs, Speaker-Raymond Cable

    2 Channel Thorens TD 318 Grado ZF1, SACD/CD Marantz 8260, Soundstream/Krell DAC1, Audio Mirror PP1, Odyssey Stratos, ADS L-1290, ICs-DIY Twisted , Speaker-Raymond Cable