Local to me pair of SRS 1.2s, worth it?

2

Comments

  • VR3
    VR3 Posts: 28,631
    The 1.2tl has far less bracing then the first gen
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    edited July 18
    Well I found 1.2TLs "close" to where I found that pair of 2.3TLs so now as long as I'm willing to drive I can pick from those and the first gens.

    https://raleigh.craigslist.org/ele/d/raleigh-polk-sda-12-tl-speakers/7764288295.html

    I don't really want to drive to NC if I don't have to but I also really don't want to buy the first gens and be disappointed. The first gens are just an hour from me so the temptation to just get those for now is real....
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,631
    I sent you a pm
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,434
    Striker2237 wrote: »
    Well I found 1.2TLs "close" to where I found that pair of 2.3TLs so now as long as I'm willing to drive I can pick from those and the first gens.

    https://raleigh.craigslist.org/ele/d/raleigh-polk-sda-12-tl-speakers/7764288295.html

    I don't really want to drive to NC if I don't have to but I also really don't want to buy the first gens and be disappointed. The first gens are just an hour from me so the temptation to just get those for now is real....

    This guy knows his "stuff" with his reference to Raife.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,532
    From the ad, "Some of the tweeters were replaced by a previous owner with the newer Polk RD0194 model"...ummm, wrong tweeter!
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    F1nut wrote: »
    From the ad, "Some of the tweeters were replaced by a previous owner with the newer Polk RD0194 model"...ummm, wrong tweeter!

    Not really a bad thing....I can pull those out and put them in my 1Cs and get a set of 8 198s for them.
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,434
    F1nut wrote: »
    From the ad, "Some of the tweeters were replaced by a previous owner with the newer Polk RD0194 model"...ummm, wrong tweeter!

    Curious, is the third down the quietest tweeter? The previous owner may have had a set of the 194's and just used them.
    · Share on FacebookShare on Twitter
  • michaeljhsda2
    michaeljhsda2 Posts: 2,182
    pitdogg2 wrote: »
    F1nut wrote: »
    From the ad, "Some of the tweeters were replaced by a previous owner with the newer Polk RD0194 model"...ummm, wrong tweeter!

    Curious, is the third down the quietest tweeter? The previous owner may have had a set of the 194's and just used them.
    I believe it's the loudest.

    SDA SRS 2.3TL's
    Silk Audio MS-90-BT integrated tube amp
    Yaqin MS-20L integrated tube amp
    SDA 2B TL's
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,532
    The second from top is the loudest.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    edited July 19
    So my temptation to buy those 1st gens is winning, what should I check over and realistically offer?

    These won't be my end goal, but I just can't help myself lol!
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,434
    Striker2237 wrote: »
    So my temptation to buy those 1st gens is winning, what should I check over and realistically offer?

    These won't be my end goal, but I just can't help myself lol!

    That is too bad ! The pin/blade models open you up to more freedom for different amps. I drove 16hrs to buy my 2.3tl's. I do not regret it in the least. You may ask Trey but in my experience the blade/blade models were more expensive to recap because of the huge caps they had to use in the XO.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,532
    So my temptation to buy those 1st gens is winning, what should I check over
    Your brain.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    Can’t go wrong with the blade blade sda srs, hell of a speaker. Especially when you get into modding them up.
    Can always go with the tl’s at a later date if you feel something’s missing.
    After modding mine I feel no need to go any further.
    I am very happy with what they do.

    Go for it.
    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    pitdogg2 wrote: »
    Striker2237 wrote: »
    So my temptation to buy those 1st gens is winning, what should I check over and realistically offer?

    These won't be my end goal, but I just can't help myself lol!

    That is too bad ! The pin/blade models open you up to more freedom for different amps. I drove 16hrs to buy my 2.3tl's. I do not regret it in the least. You may ask Trey but in my experience the blade/blade models were more expensive to recap because of the huge caps they had to use in the XO.

    Oh I'm still getting 1.2TLs! I just want these too since the 1.2s will be a project that will take a little time to complete. These I can throw tweeters in and listen now
    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    pitdogg2 wrote: »
    Striker2237 wrote: »
    So my temptation to buy those 1st gens is winning, what should I check over and realistically offer?

    These won't be my end goal, but I just can't help myself lol!

    That is too bad ! The pin/blade models open you up to more freedom for different amps. I drove 16hrs to buy my 2.3tl's. I do not regret it in the least. You may ask Trey but in my experience the blade/blade models were more expensive to recap because of the huge caps they had to use in the XO.

    Pit, I’ll see your 16 hrs and raise you to 53.
    Drove straight thru from wy to Maryland and back for my gen 3 sda srs.
    With a detour thru Buffalo ny….
    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    I like to drive 😬
    · Share on FacebookShare on Twitter
  • Viking64
    Viking64 Posts: 7,054
    I drove 48 hours straight to pick up my 2.3TLs in a rusted-out 1953 GMC truck with no air conditioning in the middle of summer.

    When I finally got home, I realized that I left the interconnect cable at the previous owner's house and had to make the whole trip again.

    When I finally got them hooked up, I realized that all 16 drivers were seized, 2 tweeters were missing from each cabinet, and all of the capacitors were leaking.

    After rebuilding the crossovers, and replacing all of the drivers and tweeters, I finally got them hooked up again. I cranked up the volume and both cabinets exploded.

    All I remember after that is some guy on an internet forum posting something about me not using a common-ground amp. :|
    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    ^ holy flippin doodle good buddy….
    Don’t mean to chuckle on your misfortune but damn, that’s funny.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,532
    skipshot12 wrote: »
    ^ holy flippin doodle good buddy….
    Don’t mean to chuckle on your misfortune but damn, that’s funny.

    He's joking.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    edited July 19
    My drive to Maryland and back was uphill both ways 😳
    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    I’m very gullible…..
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,532
    Striker2237 wrote: »
    pitdogg2 wrote: »
    Striker2237 wrote: »
    So my temptation to buy those 1st gens is winning, what should I check over and realistically offer?

    These won't be my end goal, but I just can't help myself lol!

    That is too bad ! The pin/blade models open you up to more freedom for different amps. I drove 16hrs to buy my 2.3tl's. I do not regret it in the least. You may ask Trey but in my experience the blade/blade models were more expensive to recap because of the huge caps they had to use in the XO.

    Oh I'm still getting 1.2TLs! I just want these too since the 1.2s will be a project that will take a little time to complete. These I can throw tweeters in and listen now

    You can lead a horse to water, but...
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    Plus, you’ll have experience and the tl’s will be ****-on-a-ritz when you go to mod 👍
    · Share on FacebookShare on Twitter
  • skipshot12
    skipshot12 Posts: 1,158
    Dang, can’t say ****?
    · Share on FacebookShare on Twitter
  • Viking64
    Viking64 Posts: 7,054
    skipshot12 wrote: »
    ^ holy flippin doodle good buddy….
    Don’t mean to chuckle on your misfortune but damn, that’s funny.

    0oqsw9jj3kfo.jpg
    · Share on FacebookShare on Twitter
  • motorstereo
    motorstereo Posts: 2,132
    In 2011 I drove 2 states away to get my modded 1.2tls which had been up for sale for a while. The seller was also a member here and that trip was quite the adventure. It also was my best move ever in this hobby as nothing so far has come close to pushing them out of their spot.

    Pour yourself a large cup of patience and take the knowledgeable member's advice here. Wait for the good ones.
    · Share on FacebookShare on Twitter
  • xschop
    xschop Posts: 5,000
    skipshot12 wrote: »
    Dang, can’t say ****?

    Can't say alota**** around here.
    Don't take experimental gene therapies from known eugenicists.
    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    edited July 21
    c0a3smp9hm2h.jpeg
    lgb6p7y6z17g.jpeg

    Borrowed the unused HT amp from my dad, should be good enough for now.

    I'm eying a set of Classe Deltas my local store wants to cut me a deal on, they want $17k for the pair but I need to listen to them more before deciding....my dad is saying to just go with Mac but he is beyond biased lol!

    EDIT: just checked the bag he sent with the amp and it looks like he included some nice RCA cables too!
    schfxx43uyvh.jpeg
    · Share on FacebookShare on Twitter
  • Striker2237
    Striker2237 Posts: 38
    Wow. Damn does a good amp make a difference, I've never heard my speakers before this it seems lol!
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,434
    Striker2237 wrote: »
    Wow. Damn does a good amp make a difference, I've never heard my speakers before this it seems lol!

    🤦🏻‍♂️🤦🏻‍♂️🤦🏻‍♂️
    · Share on FacebookShare on Twitter