Anyone Need parts from a PSW1000?
rtart
Posts: 832
I've got a PSW1000 (black and rosewood panels) that has a bad amp. I wound up with it a few years ago, and the previous owner had replaced the amp. He did a 'what I have laying around' job with it, so the amp isn't up to to the task. I did some research and it looks like the 'best' replacement option was an amp that runs over $400 now. The last thing I need is another sub, so I don't need it even if the amp was less $$$.
Before I pitch it or donate it, thought I'd see if anyone needs drivers or other parts. Cosmetically it is decent, and would blend really well with other Polk gear, like the Lsi series.
If you need something let me know. I'm in the ATL area.
Before I pitch it or donate it, thought I'd see if anyone needs drivers or other parts. Cosmetically it is decent, and would blend really well with other Polk gear, like the Lsi series.
If you need something let me know. I'm in the ATL area.
My 7.4.4 DIY 4k Home Theater:
Polk LSiM 707 L-C-R, LSiM702 side surrounds, LSiM 705 rears
Polk LSiM 702s x 4 on the Ceiling Atmos speakers
2 x SVS PB12/Plus 2's
Denon X3700H
Emotiva XPA11 Gen 3
XBox One X 4k & BD and streaming
Panasonic UB-420 4k player
HD-A35 HD DVD
Oppo BD-103D for hirez audio
Technics SL-D2 TT, Grado Gold Cartridge
JVC DLA-RS2000/NX7 projector
Silver Ticket 120" acoustically transparent screen
Berkline 090 electric recliners with Aura Bass Shakers
Polk LSiM 707 L-C-R, LSiM702 side surrounds, LSiM 705 rears
Polk LSiM 702s x 4 on the Ceiling Atmos speakers
2 x SVS PB12/Plus 2's
Denon X3700H
Emotiva XPA11 Gen 3
XBox One X 4k & BD and streaming
Panasonic UB-420 4k player
HD-A35 HD DVD
Oppo BD-103D for hirez audio
Technics SL-D2 TT, Grado Gold Cartridge
JVC DLA-RS2000/NX7 projector
Silver Ticket 120" acoustically transparent screen
Berkline 090 electric recliners with Aura Bass Shakers
Comments
-
odd question, but would it work if you connected it to the speaker in from an external amp?
-
As you may recall, the PSW1000 amps were prone to failures. A cottage industry of what to do with them sprung up, and one idea was to replace the plate amp with a blank plate and add speaker terminals to use an outboard amp. So, yes, it would work. An amp designed for sub use would be the best option, since an adjustable high pass filter would be included. If not, a separate EQ device would be needed. Still $400....My 7.4.4 DIY 4k Home Theater:
Polk LSiM 707 L-C-R, LSiM702 side surrounds, LSiM 705 rears
Polk LSiM 702s x 4 on the Ceiling Atmos speakers
2 x SVS PB12/Plus 2's
Denon X3700H
Emotiva XPA11 Gen 3
XBox One X 4k & BD and streaming
Panasonic UB-420 4k player
HD-A35 HD DVD
Oppo BD-103D for hirez audio
Technics SL-D2 TT, Grado Gold Cartridge
JVC DLA-RS2000/NX7 projector
Silver Ticket 120" acoustically transparent screen
Berkline 090 electric recliners with Aura Bass Shakers -
As you may recall, the PSW1000 amps were prone to failures. A cottage industry of what to do with them sprung up, and one idea was to replace the plate amp with a blank plate and add speaker terminals to use an outboard amp. So, yes, it would work. An amp designed for sub use would be the best option, since an adjustable high pass filter would be included. If not, a separate EQ device would be needed. Still $400....
Didn't know any of this. I already have a PSW650 that will receive a signal when initially turned on but then goes into standby mode. Also a RT1000 that emits an enormous buzz when I attempt to play anything through it. I have enough to do's or I'd take it. -
I’m looking for a psw1000 but hoping to find a working unit.
Just curious where you’re located since shipping these is $$$.
Do you have the original broken amp still or no? -
Looks like AtlantaPio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
My 7.4.4 DIY 4k Home Theater:
Polk LSiM 707 L-C-R, LSiM702 side surrounds, LSiM 705 rears
Polk LSiM 702s x 4 on the Ceiling Atmos speakers
2 x SVS PB12/Plus 2's
Denon X3700H
Emotiva XPA11 Gen 3
XBox One X 4k & BD and streaming
Panasonic UB-420 4k player
HD-A35 HD DVD
Oppo BD-103D for hirez audio
Technics SL-D2 TT, Grado Gold Cartridge
JVC DLA-RS2000/NX7 projector
Silver Ticket 120" acoustically transparent screen
Berkline 090 electric recliners with Aura Bass Shakers -
Sorry. Totally missed that. Do you still have the original broken amp by chance?
-
Nope. The amp is from some other sub. The guy that had it apparently just bolted on what he had laying around.My 7.4.4 DIY 4k Home Theater:
Polk LSiM 707 L-C-R, LSiM702 side surrounds, LSiM 705 rears
Polk LSiM 702s x 4 on the Ceiling Atmos speakers
2 x SVS PB12/Plus 2's
Denon X3700H
Emotiva XPA11 Gen 3
XBox One X 4k & BD and streaming
Panasonic UB-420 4k player
HD-A35 HD DVD
Oppo BD-103D for hirez audio
Technics SL-D2 TT, Grado Gold Cartridge
JVC DLA-RS2000/NX7 projector
Silver Ticket 120" acoustically transparent screen
Berkline 090 electric recliners with Aura Bass Shakers -
burialcloud wrote: »Sorry. Totally missed that. Do you still have the original broken amp by chance?
By chance, I have one in my PSW1000. Amp is dead but has never left the sub box.
