High Current Outlets on Power Conditioners?

Alton T
Alton T Posts: 73
in Electronics
Hello Forum. :)
I was looking at Power Conditioners.
Some have "High Current" Outlets, along with the other Outlets.
1) How important are "High Current" outlets?

2) How do I know if My Amps are "High Current" ?
F1.. I read your post on the watts doubling with the Ohms ? :)

B&K ST 202?
YAMAHA A-S801?

Anyone got a Monster HTS 5000 MkII for sale? :)
Thanks for viewing,
Alton T. :)
· Share on FacebookShare on Twitter

Best Answers

  • Alton T
    Alton T Posts: 73
    edited July 2020 Answer ✓
    Thanks for posting.. :)
    I was searching for more info. on Power sources, and, Wall Plug selections
    in a house.
    My Stereo stuff is in a "Coffee Table" in the middle of the "Listening Room".
    There is no Electrical Plug Outlets in the middle where I sit.
    I got to run Electrical Extension Cords to reach the Components.
    That is why I was looking for a good "Power Strip".

    An Amplifier, ( I sometimes run two amplifiers ) , a PRE AMP, TurnTable, SCHIIT AUDIO LOKI & MAGNI.
    All that into one " AC Plug Outlet.".. ( I worry about overloading )
    I was going to use Two different Outlets, to sorta split the Load, but,
    I was watching this video.
    About the 14 Minutes into the video, the Host ( Michael Fremer) explains his thoughts on Power Conditioners on one line..

    https://www.youtube.com/watch?v=H07NpWk_Xf8

    F1, :) That Monster Warning, is it the Ethics, or, about the Product Quality?
    No disrespect to your feelings/thoughts... Just clarification.. <3
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,535
    Answer ✓
    Strictly product performance.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • joecoulson
    joecoulson Posts: 4,943
    Answer ✓
    Thanks for sharing that video.
    Good to see others have the same opinion about a single 20amp line feeding one system. That’s what a well respected audio dealer told me here in ATL also. Not to knock anyone else with multiple, but what Michael said in this video just makes sense.

    Also, Niagara baby!!
    · Share on FacebookShare on Twitter
  • honestaquarian
    honestaquarian Posts: 3,186
    edited July 2020 Answer ✓
    I haven’t had any problems with my Monsters.
    Like Carver that name seems to bring up a lot of for and against biases and arguments.
    Wish I could get a dedicated 20 amp outlet! I have heard the benefits long ago in another apartment I lived in when I plugged a radio in to one that was for an air conditioner and on it’s own circuit. I was listening to a distant FM station which was plagued with noise and when I switched to the 20 amp outlet the noise dropped by an order of magnitude!!
    Suddenly I could hear the music 🎼 🎶 playing.
    · Share on FacebookShare on Twitter

Answers

  • F1nut
    F1nut Posts: 50,535
    In theory the high current outlets allow the flow of unrestricted power. That said and IMO, it's best to plug a power amp directly to the wall outlet.

    You do not want a Monster anything.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Tony M
    Tony M Posts: 11,151
    edited July 2020
    ...
    Most people just listen to music and watch movies. I EXPERIENCE them.
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    McInPolk wrote: »
    I was going to use Two different Outlets, to sorta split the Load,

    Make sure they are on separate circuits. Home electrical wiring puts multiple outlets on the same circuit.

    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • Alton T
    Alton T Posts: 73
    Hello Forum/Guys.. :)
    Good Morning.
    Thanks for the postings.

    1) Do Amplifiers have a "built-in" EMI/RFI noise attenuation in their Power Supply Systems ?? o:)
    I was thinking, maybe the designers addressed this in their Amplifier designs/circuitry.

    Here is my Component Table. All components are within reach.
    I can Tweak the controls conveniently.
    Thanks for viewing. :)
    Stay safe everyone!!
    Have a safe Holiday weekend... :)

    Alton T. :)
    w4iomq33g2ei.jpg

    · Share on FacebookShare on Twitter