Polk DB12 subwoofers
Systems
Posts: 14,873
Hey, Recently I purchased a pair of polk db12 subwoofers in a box for $100 dollars CDN off of a friend, and I can't find any information about them on the net. Can anyone give me any info about them?
thanks.
thanks.
Testing
Testing
Testing
Testing
Testing
Post edited by Unknown User on
Comments
-
try in the subwoofer section, 'older models'It's not good, very fundamentally simply not good. - geolemon
"Its not good enough until we have real-time fearmongering. I want my fear mongered as it happens." - Shizelbs -
Originally posted by neomagus00
try in the subwoofer section, 'older models'
i think theyre 300 or 400 watts RMS
SVC 4 ohm
call polk
-CodyMusic is like candy, you have to get rid of the rappers to enjoy it -
<<< -- Has these as well....
They are rated about 400W RMS, but perform well at 500Wrms. they peak at 800W or 850, not remember.
as for tech specs, I will look.. I have a specsheet for the model line after mine, but they are relatively the same.....
-Jerry___________________________
Total cost of materials: Going up...
Time spent: Countless Hours...
Cranking the system, having it quiet outside the car, and sound that takes the rear-view off inside: PRICELESS
For some things in life, you pay others to do it... For a masterpeice, do it yourself. -
OK here are the specs for the DX series (thats D...X...) series... made after the DB's, but they will have very similar specs:
Driver Complement
Woofer 1 - 12" Diameter (30.48cm)
Polymer Composite Subwoofer
Electrical
Overall Frequency Response 20-200Hz
Nominal Impedance 4 ohms
Power Handling (continuous) 400 w
Power Handling (peak) 800 w
Efficiency 86 dB
Voice Coil Diameter: Driver 2" (5.08cm)
Magnet Weight 40.00 oz.
Install Dimensions
Driver Mounting Depth
Top Mount 5-1/4" (13.34cm)
Bottom Mount 5-3/5" (14.22cm)
Cut-out
Driver Cut-out Diameter 11-1/8" (28.26cm)
Theile/Small Parameters
Recommended Enclosure .88 cubic feet sealed
Resonant Frequency 26.3Hz Hz
Qms 6.71
Qes 0.63
Qts 0.58
Vas 2.80 cu ft. / 79.3L
Cms 213.1 Micro Meters
Bl 13.4 Tesla Meters
Sd .553sq. ft. / 0514sq m
Winding Width 1.0in / 25.4mm
Xmax (linear) .343in / 8.7mm
Xmax (mechanical) 1.0in / 25.4mm
Le 1.5 mH
Mms 172.6 g
Driver Weight 8lbs 3oz / 3.7kg
Vd .062cu. ft.
Other
Product Weight 8.30 lbs.
Speaker Warranty Limited, 1 Year parts and labor
--Jerry___________________________
Total cost of materials: Going up...
Time spent: Countless Hours...
Cranking the system, having it quiet outside the car, and sound that takes the rear-view off inside: PRICELESS
For some things in life, you pay others to do it... For a masterpeice, do it yourself. -
BTW, I have the manual for the DX subs too, I could never find the one for DB's.. it's in PDF format, ask and I'll e-mail it to you.
-Jerry___________________________
Total cost of materials: Going up...
Time spent: Countless Hours...
Cranking the system, having it quiet outside the car, and sound that takes the rear-view off inside: PRICELESS
For some things in life, you pay others to do it... For a masterpeice, do it yourself. -
Alright thanks a lot for the replies, it was very helpful. I have them hooked up to a gs designs gs4000 amplifier and they sound really nice so far.Testing
Testing
Testing -
Hey folks, i'm going to install two DB12:s to my audi coupTesting
Testing
Testing -
DB12s...just to make sure...youre talking about the old almost all black DBs and not the new ones right?
700mm=27.559"
450mm=17.717"
400mm=15.748"
4.450ft^3 volume to play with
-CodyMusic is like candy, you have to get rid of the rappers to enjoy it