RTA 12B MOdifications

Canada Bob
Canada Bob Posts: 2
edited January 2002 in Technical/Setup
Is there anyone out there other than me still using their RTA12B speakers? If so, I would like to hear from you. Has anyone upgraded the internal wiring or the capacitors in the crossover network of these speakers, and if so with what results?
Post edited by Canada Bob on
· Share on FacebookShare on Twitter

Comments

  • wangotango68
    wangotango68 Posts: 1,056
    edited January 2002
    i use the rta 15tl's and they like a million bucks to me and i never
    would ever mess with the crossover,just a little out of my league.

    scott :cool:
    · Share on FacebookShare on Twitter
  • CHRIS
    CHRIS Posts: 454
    edited January 2002
    Can. Bob- I have M12 series 2, which I rewired the inside of 1 pair. I didn't touch the crossover they sound fine the way they are. The rewire of the one pair made a slight difference but not enough to do the rest. Since the signal gets split into 1 tweeter and 4 mid drivers, it is not really degrdated IMO. I would quess Polk's too. The one thing which did annoy me was the black and white wirers made no difference as to pos. or neg.. This gets very confusing if not marked when replaceing anything, more in the M7s and lower. I had to trace the wirers backto the crossver to see which they were. I did remove the clips whch conect the wire to the drivers by useing solder. Which did make an improvment.
    Chris :)
    · Share on FacebookShare on Twitter