isolating a turn table ?

2»

Comments

  • afterburnt
    afterburnt Posts: 7,892
    If you do get balls, use them flat side down and dont peel off the sticky flat side. The raw (spherical side is way too sticky). Anyway if you do use the 2" it will be pretty effective.
    · Share on FacebookShare on Twitter
  • machone
    machone Posts: 1,510
    I had a home made turntable with a plywood plinth, a connoissur table and an SME arm. I screwed very small eye bolts into the plinth and used nylon string to hang it.
    It was a redneck setup but it worked.
    Mojo Audio Illuminati v3>>Quantum Byte w/LMS>>Rpi/PiCoreplayer>> Starlight 7 USB >> Mojo Audio Mystique v2 SE>>ModWright SWL 9.0 SE Signature>>Hafler DH-500 Amp+ (Musical Concepts Fully Modded)>>
    SRS 2.3TL (Fully Modded)...Velodyne Optimum 8 subwoofer
    1KVA Dreadnought

    Marantz SA 8005
    Pioneer PLX-1000 Turntable - Shure SC35C/N35X - V15III/VN35HE
    Yamaha TX-540 Tuner...Sony BDP-S570
    Sony PS4

    Separate subpanel with four dedicated 20 amp circuits.
    1. Amplification 2. Analog 3. Digital 4. Video

    "All THAT IS LOST FROM THE SOURCE IS LOST FOREVER"
    · Share on FacebookShare on Twitter
  • afterburnt
    afterburnt Posts: 7,892
    BTW, one of the Polkies sent me a load of Classic 45's damned if I can remember who. Anyway, talk about foot stomps or steps. Every three minutes I have to stomp my a$$ to the TT to flip or change the disc. It was a problem with 1.25" balls but not now. Me and my kids have parties trying to break the house. The house still stands lol.
    · Share on FacebookShare on Twitter