Amps

Willow
Willow Posts: 11,018
edited November 2016 in Electronics
I know, I know tons of talk on amps here.

I am currently using my Rotel 1075 to power my 703s. While it does a good job, I think they need a bit more octane. Plus I am using only 3 ch on the amp, soon to be down to 2 come next week as I'll be storing the csi5 along with all my other Rti gear. I almost jumped on the Sunfire in the FM but then thought why would I buy another 5ch amp only to use 2ch. I am not looking to passively bi-amp either, I just bought new to me MIT avt2 speaker cables so not looking at replacing them. I'm looking for a neutral to warmer sounding 2ch amp that is not large the size of my 1075. I'd be looking used and not more than 400-700 US. Less expensive the better but not a deal breaker. I know of the usuals will come up like Parasound, Bryston... So what do you guys think?
My current amp is 120wpc, I am looking for 200+ with. What are your recommendations.

Thanks
Post edited by Willow on
· Share on FacebookShare on Twitter

Comments

  • WagnerRC
    WagnerRC Posts: 2,157
    seems to be a great deal here.

    http://kahlaudio.com/products/pass-labs-xa100-class-a-monoblock-amps-absolute-sound-recommended-13000-msrp-2/
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    guess you missed the 4-700 range not 4700
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    A used dealer here has an anthem MCA 2 but is asking too much from what I can see, 700cad.
    · Share on FacebookShare on Twitter
  • WagnerRC
    WagnerRC Posts: 2,157
    sorry I thought 4-7 k
    · Share on FacebookShare on Twitter
  • WagnerRC
    WagnerRC Posts: 2,157
    I have a parasound 1500A that I purchased from a polkie and never used. If that is an option for you shoot me a pm. its is rated 200W and seems to be highly regarded on this forum.
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    WagnerRC wrote: »
    sorry I thought 4-7 k

    I wish.....
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    DSkip wrote: »
    I really like the Menuetto with the 703, but I don't think it fits your desires at 60 wpc.

    with the B&W 703?
    Just trying to see how 60wpc could beat my 120 on my Rotel. ( I know other factors are involved)
    · Share on FacebookShare on Twitter
  • mrbiron
    mrbiron Posts: 5,711
    http://www.canuckaudiomart.com/details/649298001-anthem-mca20/

    Ontario
    Listing date of September. He's a little high and has shipping factored in. Don't know how close you are to his location to save there as well...

    I enjoyed mine when I had it.
    Where’s the KABOOM?!?! There’s supposed to be an Earth shattering KABOOM!!!
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    Thought about anthem a used dealer has one but asking 750. I thought it was too much
    · Share on FacebookShare on Twitter
  • motorhead43026
    motorhead43026 Posts: 3,897
    Wagners HCA-1500 would be a very good candidate. I own one and it has plenty power @ 60amps.
    The best way to predict the future is to invent it.

    It is imperative that we recognize that an opinion is not a fact.
    · Share on FacebookShare on Twitter
  • dhart86
    dhart86 Posts: 1,594
    Willow....I have a (recommended) Belles 150A amp that I could make available. Shoot me a PM if interested
    Main Rig:
    Antipodes DX > Roon > PS Audio Directstream Jr.>deHavilland Ultraverve 3 >Belles Reference 150a >Harbeth C7 ES3


    Second Rig:
    Roon> PS Audio Directstream Jr Bridge II > EE Minimax pre (Tutay mods) >Belles 150A Ref >Monitor 5 (Westmassguy-modded)


    · Share on FacebookShare on Twitter
  • cfrizz
    cfrizz Posts: 13,415
    You should snatch up the 1500A and enjoy JF.
    Marantz AV-7705 PrePro, Classé 5 channel 200wpc Amp, Oppo 103 BluRay, Rotel RCD-1072 CDP, Sony XBR-49X800E TV, Polk S60 Main Speakers, Polk ES30 Center Channel, Polk S15 Surround Speakers SVS SB12-NSD x2
    · Share on FacebookShare on Twitter
  • MrBuhl
    MrBuhl Posts: 2,419
    If you're looking warmish - how bout a B&K Reference? 200.7 I think is 200wpc into 8ohms and doubles at 4ohms, I think one would be in your range and is pretty well regarded here. Just another option.
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    cfrizz wrote: »
    You should snatch up the 1500A and enjoy JF.

    Wagner is trying to find a good shipping box. We both don't want to risk any damage
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    Willow wrote: »
    I know, I know tons of talk on amps here.

    I am currently using my Rotel 1075 to power my 703s. While it does a good job, I think they need a bit more octane. Plus I am using only 3 ch on the amp, soon to be down to 2 come next week as I'll be storing the csi5 along with all my other Rti gear. I almost jumped on the Sunfire in the FM but then thought why would I buy another 5ch amp only to use 2ch. I am not looking to passively bi-amp either, I just bought new to me MIT avt2 speaker cables so not looking at replacing them. I'm looking for a neutral to warmer sounding 2ch amp that is not large the size of my 1075. I'd be looking used and not more than 400-700 US. Less expensive the better but not a deal breaker. I know of the usuals will come up like Parasound, Bryston... So what do you guys think?
    My current amp is 120wpc, I am looking for 200+ with. What are your recommendations.

    Thanks

    I'm familiar with the Rotel 1075 as that's the multichannel version of my old RB1070. I think you might be better off waiting for a good deal on an RB1090.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    edited November 2016
    Holy hernia batman, 100lbs.
    I plan on keeping the 1075 for the eventual rti 5.1 .
    · Share on FacebookShare on Twitter
  • dhart86
    dhart86 Posts: 1,594
    On 2nd thought Willow....I think I'll hold onto the Belles 150A
    Main Rig:
    Antipodes DX > Roon > PS Audio Directstream Jr.>deHavilland Ultraverve 3 >Belles Reference 150a >Harbeth C7 ES3


    Second Rig:
    Roon> PS Audio Directstream Jr Bridge II > EE Minimax pre (Tutay mods) >Belles 150A Ref >Monitor 5 (Westmassguy-modded)


    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    edited November 2016
    Willow wrote: »
    Holy hernia batman, 100lbs.
    I plan on keeping the 1075 for the eventual rti 5.1 .

    Perfect then.... get the 1090.

    Then you can have a 7 channel system in case you want atmos.

    Also, the 1090 has wheels in the rear... it's pretty easy to move around. Just lift the front and drag or push it along. Ingenious really.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    It would be great but not in the current budget and won't fit the current cabinet.
    This leaves me right now with the potential parasound or the anthem which he has said he is flexible on his price. The other option is two smaller amps which can be used as monos . I'm looking into that as well
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    It's done. The parasound is on its way. Thanks again @WagnerRC
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    Which parasound?
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • Joey_V
    Joey_V Posts: 8,552
    @WagnerRC is bad influence.
    Magico M2, JL113v2x2, EMM, ARC Ref 10 Line, ARC Ref 10 Phono, VPIx2, Lyra Etna, Airtight Opus1, Boulder, AQ Wel&Wild, SRA Scuttle Rack, BlueSound+LPS, Thorens 124DD+124SPU, Sennheiser, Metaxas R2R
    · Share on FacebookShare on Twitter
  • WagnerRC
    WagnerRC Posts: 2,157
    Thank Joey I found my other xlr cables.
    · Share on FacebookShare on Twitter
  • Willow
    Willow Posts: 11,018
    I just coated my request for that amp with maple syrup and Canadian back bacon. He couldn't resist selling it.
    · Share on FacebookShare on Twitter