Bottlehead Quickie V1 Preamp and Quicksand Power Amp - Battery Power!!!

MOOOO!!!!

Bottlehead Quickie V1.0 Preamp (with PJCCS upgrade) and Quicksand Power Amp.

I will resist strongly splitting these up. The top plates are always randomly distributed and I got very lucky with both of mine coming up RED!

WARNING! You will supply the batteries. There are NO power cords. The preamp is also microharmonic and does ring if you touch it. Under normal operation (not touching it or banging on whatever it sits on) it does not ring.

Built by me with more premium parts. I also supply the bases, Bottlehead badges, sound damping in both bases and extra tubes. I'm also throwing in my idea of how to cut down on the microharmonics in the tubes (the copper pipes).

Quickie Preamp: Volume control goes to 24 - ain't that special!! Has two switchable inputs and one output. Premium wiring and caps (Clarity cap and Nichicon) used, volume control is an Alps Blue. That gray stuff is sound damping not some kind of viral takeover. You will need 4x 9v batteries and 2x D cells. There's at least 4 sets of tubes included.

These tubes do NOT ever get hot. They are not designed to get hot, they will never get hot so don't consider basking in the warm glow, there is none.

Quicksand Power Amp: Premium caps and wiring used. Output caps are tipped with small film caps. Input caps are Clarity Cap PX. You will need 12 (yep - one dozen!) C batteries.

Asking $325 shipped.

u8gvr9v43zqi.jpg

alijb482hszf.jpg

ozlo9bj1b1iv.jpg

1sywnco94ddq.jpg

ahezfi6fubab.jpg
Aaron
Enabler Extraordinaire

Comments