FS - Linksys WAP Router and Wireless Card

Pauly
Pauly Posts: 4,519
edited March 2004 in Flea Market
Up for sale is A 2.4 GHz Linksys WAP (Wireless Access Point) Router and Wireless Notebook Card. Notebook card(PCMCIA) is A, B and G Compatible. (Thats 802.11X) you can find info here
http://www.bestbuy.com/site/olspage.jsp?id=1051384743681&skuId=5448642&type=product

The router is 802.11a and 802.11b compatible. you can find info here

http://www.bestbuy.com/site/olspage.jsp?id=1051384294158&skuId=4221407&type=product

Everything works just fine, near perfect, just sold my old desktop computer and never use Wireless card so its got to go to support my speaker habit. I'll post pics if requested. PM or Email me if interested. I'll Do 100.00 Shipped (US Only) FIRM! The card alone is that much. Lets get this thing sold!!!! :)

Spaz
Life without music would
Post edited by Pauly on
«1

Comments

  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    bump 90.00 till tomorrow morning where they goto Ebay. Shipping is included.Hell i'll even ship them 2 day if you want


    Lets get these suckers sold

    Paul
    Life without music would
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    why would anybody want an a or b router, alittle slow when you have g and g+

    and for under 70$

    thats the problem with antiquated technology, especially confuser hardware, every 90 days its oldhat.

    Ill give you 10 bucks for card and router/
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    To answer your question ... To interface to other equipment that one already has ...

    However in this case it doesn't matter does it ? or did I miss something ?
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    Originally posted by pixiedave
    why would anybody want an a or b router, alittle slow when you have g and g+

    and for under 70$

    thats the problem with antiquated technology, especially confuser hardware, every 90 days its oldhat.

    Ill give you 10 bucks for card and router/
    go on ebay and see if you can find this for 10 bucks bro.. either your tryin to be funny or your smoking crack andi dont find that funny Yes the router is a, b but the card is a,b,g. 11mbs is fine for most people. Like i said i just dont use the wireless anymore. 1st the walls in my 1930's house are too thick to get a good signal on the front porch 2nd. like i said i sold my old desktop no no router is needed. just the laptop.

    Spaz
    Life without music would
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    edited
    Life without music would
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    edited
    Life without music would
  • gregit
    gregit Posts: 284
    edited March 2004
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    actually, thats a very old email, since thye kidney transplant and open heart surgery, I dont consider myself a pot head anymore, occasionally to help sleep, or at at a concert. I still love pot, but with my health, I need all the energy I can muster. And more than a puff or two gets me to down to enjoy anything.

    Never smoked crack and I was being funny, And Ebay is not where I would shop,

    I find it amusing how defensive people get when you state your opinion that a item is overpriced.

    Already discounted 20$ Do I hear 70$
    That will buy a new G router.

    Cheers
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • faster100
    faster100 Posts: 6,124
    edited March 2004
    so is the notebook card a newer G card? make me a deal on this, i have a router already... do you have to have a G router and G card to get the faster throughput, it only does 11 mbs either way anyways right??
    MY HT RIG:
    Sherwood p-965
    Sherwood sd871 dvd
    Rotel 1075 amp x5
    LSI15 mains
    LsiC center
    LSIfx surround backs
    Lsi7 side surrounds
    SVS pb12/plus2


    2 Channel Rig:

    nad 1020 Pre-amp
    Rotel 1080 stereo amp
    Polk sda 2B
    kenwood grunt Tuner
    realistic lab 450 TT
    Signal cable IC
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    To get the 54 rate on the card you need a g router, but you can have a g router and a b card and card will work at 11. Vise versa too.
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • Strong Bad
    Strong Bad Posts: 4,278
    edited March 2004
    You guys are talking like 11 mbs is dog **** slow. Unless you're running a LAN in your house with several PC's all running a high graphics game networked, then 11 mbs is way faster than really any person in a home could need.

    Think about it...DSL connections get maybe 750 kbs and cable connections get somewhere between 1 - 3 mbs. 11mbs is more than enough.

    From what I can see, the only thing 802.11G is good for is distance. If you're running a wireless connection and decide to take your laptop out quite a distance from the router, then go for the G. Otherwise, stick with the cheaper priced 802.11B.

    As far as encryption goes, I haven't checked into whether the new WPA encryption is only available in G or in all of them.

    WPA (Wi-Fi Protected Access) would be the better choice over the older WEP (Wired Equivalent Privacy).
    No excuses!
  • Ceruleance
    Ceruleance Posts: 991
    edited March 2004
    11 mbps is just theorhetical isn't it? our home network is wired and capable of 10 mbps iirc, but I guarantee you there is a speed difference between the cable modem hooked straight up to a machine and the cable modem running through two hubs. (even with all the other machines on the network turned off/not using bandwidth)
  • faster100
    faster100 Posts: 6,124
    edited March 2004
    So will a G notebook card get better distance even with a 802.11B router? or does all have to be G ??
    MY HT RIG:
    Sherwood p-965
    Sherwood sd871 dvd
    Rotel 1075 amp x5
    LSI15 mains
    LsiC center
    LSIfx surround backs
    Lsi7 side surrounds
    SVS pb12/plus2


    2 Channel Rig:

    nad 1020 Pre-amp
    Rotel 1080 stereo amp
    Polk sda 2B
    kenwood grunt Tuner
    realistic lab 450 TT
    Signal cable IC
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    Actually my cable connection to the net is about 10 times that fast i.e. ~8mbps or ~1mBps ...

    But This is still significantly slower than 802.11b.

    So G is great if you are moving a lot of stuff around on your lan ... But it won't gain you anything to the outside world, at least not where I live, for a long time.
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    Originally posted by john d. strong
    You guys are talking like 11 mbs is dog **** slow. Unless you're running a LAN in your house with several PC's all running a high graphics game networked, then 11 mbs is way faster than really any person in a home could need.

    6 computers 2 on a wap

    a file server UNIX
    a web and mail server unix
    A windows box
    A g4 Powerbook
    and believe it or not, A Plan 9 Box

    and even if I wasnt running a lan, 11 is too slow for me, Hell 54 is slow, Try serving Gigabyte wav files to iTunes on my G4 wirelessly to play through my polks. My ethernet lan is gigabyte, and I would wire the laptop, but the wife is about fed up with the wires from audio computers and aquariums lol.
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    Originally posted by Ceruleance
    I guarantee you there is a speed difference between the cable modem hooked straight up to a machine and the cable modem running through two hubs. (even with all the other machines on the network turned off/not using bandwidth)
    There shouldn't be ... In my case there isn't. The hubs should be 10/100 or if you went hog wild 10/100/1000. In any case the router and the hubs or switches should not be slowing anything down.
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    Originally posted by pixiedave
    My ethernet lan is gigabyte, and I would wire the laptop, but the wife is about fed up with the wires from audio computers and aquariums lol.
    Right ... so the prob is the WAF. Not atypical in either audio or computers. Gigabit is overkill. Nice, but overkill.
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    Originally posted by PolkWannabie
    There shouldn't be ... In my case there isn't. The hubs should be 10/100 or if you went hog wild 10/100/1000. In any case the router and the hubs or switches should not be slowing anything down.
    Are we talkinng hubs or switches, A hub shares bandwidth, so a hub will slow down coming from a modem, a switch however provides full bandwidth to all confusers on lan.

    I go Modem>FreeBSD(as router, hides other computers from comcast this way)>switch>lan>wap
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    You're right ... it's been awhile since I put my SWITCHES in which I did for exactly that reason.

    And you're talking gigaBIT, right ?
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    Originally posted by PolkWannabie
    You're right ... it's been awhile since I put my SWITCHES in which I did for exactly that reason.

    And you're talking gigaBIT, right ?
    10/100/1000 its all the same when it comes to hubs or switches as far as i know!
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    Originally posted by PolkWannabie
    Same ? ... Yes.

    mBps ? ... I don't think so ...
    Of course speed is different, I was reffering to hub vs switch for bandwith thruput.
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    I know ... I was referring to your description of your network.
    Originally posted by pixiedave
    My ethernet lan is gigabyte
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    kk its late read to fast, time to turn up the polks and relax before bed, I think Yes Close to the eDge will do it.
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    Originally posted by pixiedave
    6 computers 2 on a wap

    a file server UNIX
    a web and mail server unix
    A windows box
    A g4 Powerbook
    and believe it or not, A Plan 9 Box

    and even if I wasnt running a lan, 11 is too slow for me, Hell 54 is slow, Try serving Gigabyte wav files to iTunes on my G4 wirelessly to play through my polks. My ethernet lan is gigabyte, and I would wire the laptop, but the wife is about fed up with the wires from audio computers and aquariums lol.
    Ok so dont buy the thing. Its good for home use with a single to 2 computers if you want Wireless. not everyone has to have the most newest technology out. You wont really gain anything on a g router like stated above.
    Life without music would
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    Bottom line G is only good for transfering data between computers on your LAN. (11mps b, vs 54 g) G will not gain any speed on the internet PERIOD! Not even pixie dust will fix that!:) My last try before the i have to go through the hassle of ebay.

    70.00 SHIPPED is all i can really do. If you can find a better deal then let me know cause i cant.

    Spaz
    Life without music would
  • pixiedave
    pixiedave Posts: 227
    edited March 2004
    I never said I needed it, never claimed it would speed up internet over a aor b. In my application, It serves files from file server two two computers in other parts of the house. In this instance, 11 is way to slow, because a lot of the files being server are large wav files. Saying that, i dont see how anybody with a connection faster than dsl (not much faster than dial up)could live with a 11 connection. My only comment was that you have an outdated router and its not worth what your asking. I hope you get your asking price.
    I was just trying to be humourous about the 10 dollar comment, but as is so often the case on message boards, meanings are lost due to the lack of facial expressions body posture and so on.

    As is also often the case, the value we place on a item is not what the items market value is.

    A friend gave me a old Compaq. All documentation was there, Including the price sheet. In 94 this pc sold for 1900 dollars. It had a 500mb harddrive, 4 mgs of memory and a 14k modem. It runs windows 3.11. It is in perfect working order. The computer was his moms and he asked me what I coyuld get for it. I asked what she thought it was worth for a chuckle, and her reply was 500 dollars.

    In computer hardware tuerms its a horse drawn carriage and is worth less than the price of a new floppy drive.

    But even year old hardware suffers this kind of depreciation.

    Hope you don't take this as argumentative, just expressing a view. Peace dave
    Purple.jpg
    You never blow your trip forever! < Daevid Allen
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    Originally posted by pixiedave
    I dont see how anybody with a connection faster than dsl (not much faster than dial up) could live with a 11 connection.
    Whoa ...

    I'm not wild about DSL, as in this area cable is significantly faster, but in any case even DSL in this area is significantly faster than dial up and beyond that no one that I know anywhere has a personal connection to the internet that runs faster than the 11 mbps limitation of 802.11b.

    Am I missing something ?
  • Pauly
    Pauly Posts: 4,519
    edited March 2004
    its cable/dsl compatible just in case there was any confusion
    Life without music would
  • PolkWannabie
    PolkWannabie Posts: 2,763
    edited March 2004
    LOL ...

    Right Spaz and I apologize for hijacking your thread ... I wish I needed one as I almost feel I owe it to you to buy it at this point.