Trigger cord/wire info needed

boston1450
boston1450 Posts: 7,758
in Electronics
Is there a site i can see & maybe purchase a decent trigger wire/cord for my Yamaha rvx-2600 trigger out to a Parasound amplifier ? I have this wire/cord (found in my cord bucket) & not sure its good enough. Thanks in advance. diok2vppidc2.jpeg
Randy-Maine
2ch-RTA15tl crossover upgrade
by David WMG
Yamaha cr1000 cr2040
HT-Yamaha Parasound Acurus
MIT BJC Cs1000p Polk Rotation
· Share on FacebookShare on Twitter

Comments

  • motorhead43026
    motorhead43026 Posts: 4,005
    Try it to see if they fit. Most likely sizes to work are 3.5 mm or 2.5mm or a cord with a combo of both. I believe the Parasound amp is 2.5 mm, I know my Halo A23 is and my P5 is 3.5mm.
    Patriotism is the last refuge of a scoundrel…….Samuel Johnson

    Since we don’t know where we are going we have to stick together in case someone gets there….Ken Kesey

    To learn who rules over you, simply find out who you are not allowed to criticize.
    – Kevin Alfred Strom
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    edited April 2016
    Im afraid i will see smoke come bellowing out LOL... I will give it a try asap. Thanks
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • motorhead43026
    motorhead43026 Posts: 4,005
    edited April 2016
    it is only a 12v trigger won't smoke anything. That looks like 3.5mm pins both ends. Or, just use the on/off switches......lol.
    Patriotism is the last refuge of a scoundrel…….Samuel Johnson

    Since we don’t know where we are going we have to stick together in case someone gets there….Ken Kesey

    To learn who rules over you, simply find out who you are not allowed to criticize.
    – Kevin Alfred Strom
    · Share on FacebookShare on Twitter
  • mikeyb128
    mikeyb128 Posts: 2,885
    I use cheapie auxiliary cables (head phone jack on both ends). Haven't had a problem yet.
    2 channel:
    Bryston 4B3, Bryston BDA3, Cary SLP05, Shanling CDT1000SE with parts conneXion level 2 mods, Nottingham analogue ace space 294, soundsmith Carmen MKii, Zu DL103 MKii, Ortofon MC 20 MKii, Dynavector XX2 MKii, Rogue Audio Ares, Core power technologies balanced power conditioner, Akiko Corelli power conditioner with Akiko Audio HQ power cable, Nordost heimdall 2, Frey 2, interconnects, speaker and power cables, Focal Electra 1028 BE 2, Auralic Aries Femto, Black diamond racing cones, ingress audio level 1 roller blocks, JL Audio E110 with Auralic subdude, Primacoustics room treatments.
    Theater:
    Focal Aria 926,905,CC900, SVS PB ultra x2. Pioneer Elite SC85, Oppo BDP93, Panamax M5400PM, Minix neox6, Nordost Blue heaven LS power cables.

    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Thanks guys i will give it a try
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • rooftop59
    rooftop59 Posts: 8,121
    yep when I could take advantage of that setup I used a very cheap rca mini to rca mini. No problems...
    Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es
    Game Room 5.1.4:     Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra
    Bedroom 2.1     Harmon Kardon HK3490; Bluesounds Node N130; Polk RT25i; ACI Titan Subwoofer
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Nope. Didnt work. Fit in the Yammy but the Parasound is much smaller pin
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • motorhead43026
    motorhead43026 Posts: 4,005
    The Parasound as I thought is 2.5mm. You can get a combo.
    Patriotism is the last refuge of a scoundrel…….Samuel Johnson

    Since we don’t know where we are going we have to stick together in case someone gets there….Ken Kesey

    To learn who rules over you, simply find out who you are not allowed to criticize.
    – Kevin Alfred Strom
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Where do i get those. Can i get it on the bay ? If you happen to see a site/ad could you post it. I was gonna order one BUT was afraid id end up buying the wrong one.... So does that mean the Yamaha is 3.5 & Psd is 2.5 ? I couldnt find the size listed in the Yamaha & the cord fits perfect. The Psd is very small & manual states 2.5.. I wasnt sure the specs of the cable i have
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • ken brydson
    ken brydson Posts: 8,987
    I'd check monoprice ...
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    ^^^^ i will try googling that. Ive never laid eyes on their site. Thanks
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Got this one coming. It helps knowing the sizes :). Thanks all. http://m.ebay.com/itm/2-5mm-to-3-5mm-Male-Headphones-Headset-Jack-Stereo-Speaker-Audio-Adapter-Cable-/311423593168?txnId=668977253021
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • msg
    msg Posts: 10,452
    edited April 2016
    Randy, if I remember correctly, it's a mono cable we use for triggers? Looks like Mike's got it working with a stereo cable. I didn't know you could do this. I think I remember back when I was looking for them, from feedback on the board, I went with the mono ones from Monoprice, just like Ken recommends.

    I didn't know you could get a combo cable. Pretty neat. I'm also in this situation for a preamp/amp combo, and skirted it for now by using the triggered outlets on the power management center I'm using. Just another option if whatever you're using offers that, as well.

    As I'm writing this, I went looking for these on Monoprice to send you a link and couldn't find them; weird, thought for sure that's where I got them, but then went to my cable stash tub, and it looks like I actually got them from MCM Electronics.

    Even though you've got it sorted, I'll throw this info up well for sources for mono DC trigger cables in case anyone else needs anything like this.

    This is the model/part number I used, the 24-810.
    This is a 3.5mm mono cable - http://www.mcmelectronics.com/product/24-810

    Here's a link to a search on MCM for 3.5mm to 2.5mm mono adapters - http://bit.ly/1MXitbX

    Could go the other way with it and get a 2.5mm mono cable, and use a 2.5mm to 3.5mm adapter plug - http://bit.ly/1MXiUDd

    I think your 3.5mm to 2.5mm cable is probably the better option, since there might not be much clearance back behind equipment to add an adapter?
    Post edited by msg on
    I disabled signatures.
    · Share on FacebookShare on Twitter