Polk is only site I can connect to tonight

BlueFox
BlueFox Posts: 15,251
in The Clubhouse
For whatever reason, I cannot connect to other audio sites, Amazon, CNN, etc., but Polk still works. Usually, it is all or nothing.
Lumin X1 file player, Westminster Labs interconnect cable
Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
Magico S5 MKII Mcast Rose speakers; SPOD spikes

Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
Shunyata Sigma XLR analog ICs, Sigma speaker cables
Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
Three 20 amp circuits.
· Share on FacebookShare on Twitter

Comments

  • hochpt21
    hochpt21 Posts: 5,423
    Must be a sign :)

    Send me your Pass amps :):)
    2 ChannelTurntable - VPI Classic 2/Ortofon 2M BlueAmplification - Rogue Audio Cronus Magnum II, Parks Audio Budgie PhonoSpeakers - GoldenEar Triton 17.2 Home TheaterDenon AVR-X3300W; Rotel RMB-1066; Klipsch RP-280F's, Klipsch RP-450C, Polk FXi3's, Polk RC60i; Dual SVS PB 2000's; BenQ HT2050; Elite Screens 120"Man CaveTurntable - Pro-Ject 2.9 Wood/Grado GoldAmplification - Dared SL2000a, McCormack DNA 0.5 DeluxeCD: Cambridge AudioSpeakers - Wharfedale Linton 85th Anniversary; LSiM 703; SDA 2A
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    Well, somebody fixed the problem. I guess I can keep my amps. :)
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    "cheesy"? Cardboard adds a touch of class to Pass. :)

    1ba7chdqxmwi.jpg
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • Thorton
    Thorton Posts: 1,324
    Don't knock the covers. They probably took 2 weekends of design planning and laser cutting. BF, you can't dim or turn off the lights? If it bothered me that much, I'd probably pull out the bulbs.
    _____________________________________________________________________________________________
    Ethernet Filter: GigaFOILv4 with Keces P3 LPS
    Source: Roon via ethernet to DAC interface
    DAC: Bricasti M1SE
    Pre/Pro: Marantz AV8805
    Tube Preamp Buffer: Tortuga TPB.V1
    Amp1: Nord One NC1200DM Signature, Amp2: W4S MC-5, AMP3: W4S MMC-7
    Front: Salk SoundScape 8's, Center: Salk SoundScape C7
    Surround: Polk FXIA6, Surround Back: Polk RTIA9, Atmos: Polk 70-RT
    Subs: 2 - Rythmik F25's
    IC & Speaker Cables: Acoustic Zen, Wireworld, Signal Cable
    Power Cables: Acoustic Zen, Wireworld, PS Audio
    Room Treatments: GIK Acoustics
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited May 2015
    LOL. They arrived on a Saturday, and I set them up as soon as I could. As the sun went down, and it got darker, the meter lights got brighter. I felt as if I was looking at a car coming at me. Unfortunately, there is no way to turn them off, and that first night I did a quick measurement, cut out two pieces of cardboard, and have been happy ever since, which will be two years this July. Since I mostly use these amps at night and in the dark, the cardboard doesn't bother me. I do take them out when I use the system during the day, or with company, but for serious Friday and Saturday nights they are in place.

    This is actually a good example of how mood can affect sound. With the cardboard in place, I am happy and the music sounds good. With the cardboard out I am irritated and can't listen to the music.

    xm8b11pgblmf.jpg
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,748
    I felt as if I was looking at a car coming at me.

    LOL.....I can see that.
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited May 2015
    nbrowser wrote: »
    Oh meters...I love meters...nothin nicer than dancing needles like how I make the tach in my truck work for it's keep :)

    You do not want to see those meters dance. Normally the meters never move, and they don't move to the right side until current really increases, and you are in the danger zone. When I broke my speakers both meters were bouncing in the danger zone.
    Post edited by BlueFox on
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • hochpt21
    hochpt21 Posts: 5,423
    BlueFox wrote: »
    Well, somebody fixed the problem. I guess I can keep my amps. :)

    Whew...glad it got fixed. I didn't really want to take the amps, but if the universe was saying so...who am I?
    2 ChannelTurntable - VPI Classic 2/Ortofon 2M BlueAmplification - Rogue Audio Cronus Magnum II, Parks Audio Budgie PhonoSpeakers - GoldenEar Triton 17.2 Home TheaterDenon AVR-X3300W; Rotel RMB-1066; Klipsch RP-280F's, Klipsch RP-450C, Polk FXi3's, Polk RC60i; Dual SVS PB 2000's; BenQ HT2050; Elite Screens 120"Man CaveTurntable - Pro-Ject 2.9 Wood/Grado GoldAmplification - Dared SL2000a, McCormack DNA 0.5 DeluxeCD: Cambridge AudioSpeakers - Wharfedale Linton 85th Anniversary; LSiM 703; SDA 2A
    · Share on FacebookShare on Twitter
  • cnh
    cnh Posts: 13,284
    BlueFox wrote: »
    LOL. They arrived on a Saturday, and I set them up as soon as I could. As the sun went down, and it got darker, the meter lights got brighter. I felt as if I was looking at a car coming at me. Unfortunately, there is no way to turn them off, and that first night I did a quick measurement, cut out two pieces of cardboard, and have been happy ever since, which will be two years this July. Since I mostly use these amps at night and in the dark, the cardboard doesn't bother me. I do take them out when I use the system during the day, or with company, but for serious Friday and Saturday nights they are in place.

    This is actually a good example of how mood can affect sound. With the cardboard in place, I am happy and the music sounds good. With the cardboard out I am irritated and can't listen to the music.

    xm8b11pgblmf.jpg

    Are you telling us that there is no such thing as an AUDIOPHILE BLIND for VU meters that can be bought in a variety of flavors north of $1K? lol
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,834
    How about trying a layer or two of tinting film, like the kind they use on car windows?
    If you went to an auto detailing shop and asked they'd probably give you a couple of scrap pieces to try, might be worth "looking into". (rather than the cardboard...LOL)
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • nooshinjohn
    nooshinjohn Posts: 25,462
    The blue lights bother me too. Can you flip them over to a warm amber color? Something that would emulate the warm glow of tubes would be very soothing.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
    · Share on FacebookShare on Twitter