Turntables

So I've been looking at TT's lately. The Technics 1200 is not sounding right. I believe the cables are shot. I've looked as some new on the net and some used ones on eBay. Anyone have any experience on Parasound? TTB 720? There is a Marantz TT 240 on there too. Also saw a Onkyo CP 1027F. As for new I've been thinking about the Pro-Ject, the Music Hall, and the Teac is my favorite cosmetically. If you have any thoughts or opinions on any of them or personal experience I'd be interested in what you think. Budget is between $250 - $500 I think.
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

Additional projects: RTA 12c's

Comments

  • MrBuhl
    MrBuhl Posts: 2,419
    Sorry - I know its not your question, but I'd think getting it recabled would be well worth the minor expense - those Technics 1200's have a pretty solid reputation.
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • MrBuhl
    MrBuhl Posts: 2,419
    ^^ yep - they get $5-$6 bills around here for one in good condition
    VA HT HK AVR20II, Sony S9000ES CD/DVD/SACD, Polk Audio RC80i / Polk Audio CSi3, 60" Panasonic Plasma, Nordost / Signal Cable A2 / Wireworld / Pangea / Magic Power
    VA 2 Channel Focal Electra 926 speakers, Pass Labs X150.5 Amp, Eastern Electric MiniMax Preamp (Tutay mods), Eastern Electric Minimax CDP (Scott Nixon mods), Music Hall mmf 5.1 Turntable, Parks Audio Budgie Phono Pre , Audioengine B1 streamer, MIT S3 IC's / MIT Shotgun S3 Speaker Cables / PS Audio power cables
    Noggin Schiit Valhalla, Pangea, Phillips Fidelio X1, Polk UF8000

    Polk SDA1c modded
    Polk CRS+ 4.1TL modded (need veneer)
    Polk SDA2BTL (fully modded)
    A/L 1000VA Dreadnought Canare 4s11 SDA cable
    SACD Marantz DV8300
    Sony S9000ES CD/DVD/SACD
    Yamaha YP-D6
    Soundcraftsmen PCR800
    Audible Illusions L1 Preamp
    Vincent MFA based Cocci Tube Preamp
    Pho-700 Phono Pre
    Signal Cable Silver Resolution IC's






  • xjghost
    xjghost Posts: 1,101
    edited February 2015
    Oh I just realized I put in the wrong number. It's a 1400. I think I paid $75 for it a few years ago. I considered this but don't have a solder set up that is worth a darn.
    http://www.ebay.com/itm/Custom-Mogami-Neutrik-Rean-Gold-RCA-4FT-Cable-for-Turntable-or-Technics-SL-1200s-/301518554692?pt=LH_DefaultDomain_0&hash=item4633e80644
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
  • xjghost
    xjghost Posts: 1,101
    So I ended up with the Teac. It's what I wanted out of a TT right now. I wanted to be able to use it on any system, has a built in phone pre, I wanted to be able to easily go from 33 to 45, it has a switch, and I wanted it to look like wood. I love the wood look. This table has an Audio Technica AT95E Cartridge which from what I understand is a decent cartridge.

    http://www.teac.com/product/tn-300/specifications/

    242BDC87-E3A3-44BF-A9A5-57C557CBB7A6_zpsddnwfoas.jpg

    I have not had a lot of time with the table yet but I can tell you I really like it over my Technics. The only drawback I have found is that it does not have an auto return. Not that it matters but growing up with TT of the 80's it is something that has spoiled me. The bright side is I finally get to enjoy the special tracks on Jack White's "Lazaretto" and the locked track on "Sgt Peppers." I also like the idea of being able to try the USB out with some of my vinyl that is not available on CD or digital format.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
  • xjghost
    xjghost Posts: 1,101
    So I ended up with the Teac. It's what I wanted out of a TT right now. I wanted to be able to use it on any system, has a built in phone pre, I wanted to be able to easily go from 33 to 45, it has a switch, and I wanted it to look like wood. I love the wood look. This table has an Audio Technica AT95E Cartridge which from what I understand is a decent cartridge.

    http://www.teac.com/product/tn-300/specifications/

    242BDC87-E3A3-44BF-A9A5-57C557CBB7A6_zpsddnwfoas.jpg

    I have not had a lot of time with the table yet but I can tell you I really like it over my Technics. The only drawback I have found is that it does not have an auto return. Not that it matters but growing up with TT of the 80's it is something that has spoiled me. The bright side is I finally get to enjoy the special tracks on Jack White's "Lazaretto" and the locked track on "Sgt Peppers." I also like the idea of being able to try the USB out with some of my vinyl that is not available on CD or digital format.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
  • xjghost
    xjghost Posts: 1,101
    So I ended up with the Teac. It's what I wanted out of a TT right now. I wanted to be able to use it on any system, has a built in phone pre, I wanted to be able to easily go from 33 to 45, it has a switch, and I wanted it to look like wood. I love the wood look. This table has an Audio Technica AT95E Cartridge which from what I understand is a decent cartridge.

    http://www.teac.com/product/tn-300/specifications/

    242BDC87-E3A3-44BF-A9A5-57C557CBB7A6_zpsddnwfoas.jpg

    I have not had a lot of time with the table yet but I can tell you I really like it over my Technics. The only drawback I have found is that it does not have an auto return. Not that it matters but growing up with TT of the 80's it is something that has spoiled me. The bright side is I finally get to enjoy the special tracks on Jack White's "Lazaretto" and the locked track on "Sgt Peppers." I also like the idea of being able to try the USB out with some of my vinyl that is not available on CD or digital format.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's