info on sda speakers
stitch
Posts: 6
Hi all new member here. About 6 months ago i was given a set of polk audio sda2 speakers
. i am having a very hard time finding out what model they are. I can tell you that each enclosure has (2) sl2000 tweeters
and (3) mw6501 drivers
, and where made in jan/feb 1986. all the info i have been finding is saying these parts are not correct.
. i am also looking to find a replacement mw6501. one is locked up in the right box, but everything else works. thank you in advance.
. i am having a very hard time finding out what model they are. I can tell you that each enclosure has (2) sl2000 tweeters
and (3) mw6501 drivers
, and where made in jan/feb 1986. all the info i have been finding is saying these parts are not correct.
. i am also looking to find a replacement mw6501. one is locked up in the right box, but everything else works. thank you in advance.Comments
-
you have the original SDA2 no A no B just plain ol SDA2. Keep eyes on Ebay but I believe Polk still sell a new version of the 6501 plays the same just looks a little different as the VC leads are now under the dustcap and you will need to cut the rubber surround for the screws so they don't pull the surround
-
sda2 came with sl1000 tweeters, not the sl2000 and 6600x series drivers.
-
MW 6600 was in the first batch then they went to 6501. My SDA1 signature was the same way they used in mine a 6501 for dimensional woofer and mw6600 for the other 3 so I kept it that way. So to the OP you can look for both on ebay BUT there is a good chance that they could get locked up in shipping.
-
that is what i was just reading, but i also found a nifty little jig to fix the 6501 i have. i will try it first and if all else fails i will buy one set of the new 6501 drivers, and replace one from each box. now should i remove the magnet from the locked up driver and leave it in the box connected or disconnected.
-
leave it the box DISCONNECTED is what I'd do until you get a replacement. Make sure the leads cannot touch or you'll need something a lot more pricey...I'd personally use another set of speakers until fixed.
