Wyred SX1000 Monos Black

cstmar01
cstmar01 Posts: 4,424
edited January 2014 in For Sale (FS) Classifieds
Well because I can't have the SoundLabs set up right now and I'm trying out some low power with high eff. speakers for now I'm going to put these up for sale.

I was the 2nd owner and these are the all black. Recently I had borrowed these to Rich who has posted pics of them in his system.

I'm looking for 1500 plus shipping and paypal fee if not sending as a gift.

I also have some Signal Cable PC's I was using on them as well that I will include for additional 60 bucks with the amps. They were a 1.5M and 2M cables which worked great in my set up for the length. Otherwise I will send the stock cords.
Post edited by cstmar01 on
· Share on FacebookShare on Twitter

Comments

  • Toolfan66
    Toolfan66 Posts: 17,337
    edited January 2014
    Wish you would have had these up two weeks ago, I received mine from W4S last week. Would have saved me a few bucks...

    I'm digging mine..

    GLWTS...
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    Sorry! I love them and will probably pick up a pair when I go back to the Soundlabs or if they have a new version out those instead. In the mean time I'll be putting the money into some other toys for now :)
    · Share on FacebookShare on Twitter
  • drumminman
    drumminman Posts: 3,396
    edited January 2014
    How old are they, which version?
    "Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    I don't have a spec age on them but will check again when I get home. There is only 1 verison, I have asked this with Wyred and they confirmed this prior to me even buying the amps. See the email response below:


    Hello Chris,

    Thank you very much for your interest in our products and I am happy to help. On various forums there has been a MKII version mentioned but one does not in fact exist. The first monoblocks produced by W4S was the 200SX which was followed by the current SX series such as the SX-1000. When referring to a SX-1000, that is our current model and it cannot be updated because an updated model does not currently exist. You are correct that there was an update in the input stage from the 200SX version to the SX-1000.

    Please let me know if I can clarify anything and have a great day.

    Best Regards,

    Clint
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    some pics here:
    http://www.polkaudio.com/forums/showthread.php?157270-Salk-SoundScape-8-System
    · Share on FacebookShare on Twitter
  • SCompRacer
    SCompRacer Posts: 8,513
    edited January 2014
    Another pic, all I have...I don't recall any blemishes or marks on them, they worked great!

    There is a control accessible from bottom panel to dim or turn off front panel lights.

    Six moons review...

    http://www.6moons.com/audioreviews/wyred/monos.html

    wyredsx1000.jpg
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
    · Share on FacebookShare on Twitter
  • JuanR
    JuanR Posts: 718
    edited January 2014
    Are you interested in any trades plus cash? Just wondering if you would be interested.

    Thanks

    Juan
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    At this time no trades as I'm pretty set on what I'm going to use for amps and speakers. I've got some Klipsch on the way and going to try my hand at building a tube amp from Bottlehead
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    One and only price drop on these as I will list else where soon. 1450.00 plus shipping and paypal. still 60 bucks extra for the Signal PC's.

    These are all boxed up and ready to go.
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    one more price drop as I don't always like having to deal with the Gon so 1400.00 plus shipping (they are around 32lbs boxed) plus paypal. Extra PC's for 60 bucks still.

    These are great amps guys. They will drive everything out there easily.
    · Share on FacebookShare on Twitter
  • cstmar01
    cstmar01 Posts: 4,424
    edited January 2014
    sold
    · Share on FacebookShare on Twitter
  • danz1906
    danz1906 Posts: 5,144
    edited January 2014
    Congrats on the sale...
    Linn AV5140 fronts
    Linn AV5120 Center
    Linn AV5140 Rears
    M&K MX-70 Sub for Music
    Odyssey Mono-Blocs
    SVS Ultra-13 Gloss Black:D
    · Share on FacebookShare on Twitter