New McIntosh Gear

Polkitup2
Polkitup2 Posts: 1,622
edited January 2014 in 2 Channel Audio
Switched gears completely from my Parasound JC2 and Bel Canto Ref500ms to McIntosh C2300 and MC302. So far I'm very happy with the change. The JC2 and Bel Cantos were incredible, clear, gobs of detail but I felt they were a little thin sounding with the Logans. The Mac combo provides a fuller more natural sound than the previous gear and I don't feel I am losing anything. A big plus is that I can listen to it for hours on end with no listener fatigue. The functionality of the C2300 for my needs is also superior to the JC2. I love the triggers for the amp and even my Wyred DAC-2 is now triggered. HT bypass is great, whenever I turn on my receiver all the Mac gears fires up in passthrough mode. I also like the ability to adjust all input levels. The negative is that my back still freakin hurts from lugging the MC302 into the house. I also want to thank Audio Classics who gave me a great deal on the MC302.
Post edited by Polkitup2 on
· Share on FacebookShare on Twitter
«1

Comments

  • chumlie
    chumlie Posts: 8,658
    edited December 2013
    Congrats on some fine gear.
    · Share on FacebookShare on Twitter
  • brianle
    brianle Posts: 572
    edited December 2013
    Congrats! I have the mc275 and still dreaming about pairing it with the c2300 preamp! :)
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,658
    edited December 2013
    Congrats on a beautiful set up ya got there. Sure it does sound very nice. What a present HOHO. Worth the back pain :smile:
    ..
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,305
    edited December 2013
    Beautiful...
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • hochpt21
    hochpt21 Posts: 5,423
    edited December 2013
    Wow, that looks awesome.

    Whoops, just had to sleeve a little drool off my chin.
    2 ChannelTurntable - VPI Classic 2/Ortofon 2M BlueAmplification - Rogue Audio Cronus Magnum II, Parks Audio Budgie PhonoSpeakers - GoldenEar Triton 17.2 Home TheaterDenon AVR-X3300W; Rotel RMB-1066; Klipsch RP-280F's, Klipsch RP-450C, Polk FXi3's, Polk RC60i; Dual SVS PB 2000's; BenQ HT2050; Elite Screens 120"Man CaveTurntable - Pro-Ject 2.9 Wood/Grado GoldAmplification - Dared SL2000a, McCormack DNA 0.5 DeluxeCD: Cambridge AudioSpeakers - Wharfedale Linton 85th Anniversary; LSiM 703; SDA 2A
    · Share on FacebookShare on Twitter
  • F1nut
    F1nut Posts: 50,654
    edited December 2013
    Ho Ho Ho, Merry McIntosh!

    BTW, nice MIT's
    Political Correctness'.........defined

    "A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."

    President of Club Polk

    · Share on FacebookShare on Twitter
  • Mike Reeter
    Mike Reeter Posts: 4,315
    edited December 2013
    Always loved the "Classic" look of Mac gear, color me green with envy. Enjoy!!!
    · Share on FacebookShare on Twitter
  • BlueMDPicker
    BlueMDPicker Posts: 7,569
    edited December 2013
    Very nice! Enjoy.
    · Share on FacebookShare on Twitter
  • drumminman
    drumminman Posts: 3,396
    edited December 2013
    Stunning! Glad you're enjoying it.
    "Science is suppose to explain observations not dismiss them as impossible" - Norm on AA; 2.3TL's w/sonicaps/mills/jantzen inductors, Gimpod's boards, Lg Solen SDA inductors, RD-0198's, MW's dynamatted, Armaflex speaker gaskets, H-nuts, brass spikes, Cardas CCGR BP's, upgraded IC Cable, Black Hole Damping Sheet strips, interior of cabinets sealed with Loctite Power Grab, AI-1 interface with 1000VA A-L transformer
    · Share on FacebookShare on Twitter
  • Ern Dog
    Ern Dog Posts: 2,237
    edited December 2013
    Look pretty schweeeet!

    When can we come over?
    · Share on FacebookShare on Twitter
  • pearsall001
    pearsall001 Posts: 5,092
    edited December 2013
    Beautiful pieces...congrats & enjoy.
    "2 Channel & 11.2 HT "Two Channel:Magnepan LRSSchiit Audio Freya S - SS preConsonance Ref 50 - Tube preParasound HALO A21+ 2 channel ampBluesound NODE 2i streameriFi NEO iDSD DAC Oppo BDP-93KEF KC62 sub Home Theater:Full blown 11.2 set up.
    · Share on FacebookShare on Twitter
  • pumpkinman
    pumpkinman Posts: 9,884
    edited December 2013
    What else is there left to say............:cheesygrin:
    lmivdewpnb28.jpg


    Because I am The Pumpkinking


    A Kind Word Is An Easy Gift To Give
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,572
    edited December 2013
    one word.....sexy.
    · Share on FacebookShare on Twitter
  • BlueFox
    BlueFox Posts: 15,251
    edited December 2013
    Good job. As George Jefferson would say, "Moving on up."
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
    · Share on FacebookShare on Twitter
  • Thorton
    Thorton Posts: 1,324
    edited December 2013
    Congratulations! I've always liked the looks of McIntosh products. Enjoy.
    _____________________________________________________________________________________________
    Ethernet Filter: GigaFOILv4 with Keces P3 LPS
    Source: Roon via ethernet to DAC interface
    DAC: Bricasti M1SE
    Pre/Pro: Marantz AV8805
    Tube Preamp Buffer: Tortuga TPB.V1
    Amp1: Nord One NC1200DM Signature, Amp2: W4S MC-5, AMP3: W4S MMC-7
    Front: Salk SoundScape 8's, Center: Salk SoundScape C7
    Surround: Polk FXIA6, Surround Back: Polk RTIA9, Atmos: Polk 70-RT
    Subs: 2 - Rythmik F25's
    IC & Speaker Cables: Acoustic Zen, Wireworld, Signal Cable
    Power Cables: Acoustic Zen, Wireworld, PS Audio
    Room Treatments: GIK Acoustics
    · Share on FacebookShare on Twitter
  • Summerwind2
    Summerwind2 Posts: 98
    edited December 2013
    3 words; congratulations, sexy, jealous. In that order.
    · Share on FacebookShare on Twitter
  • miner
    miner Posts: 1,305
    edited December 2013
    Enjoy your new McIntosh toys - you will soon be hip-no-tized by the blue meters.
    [
    · Share on FacebookShare on Twitter
  • zingo
    zingo Posts: 11,258
    edited December 2013
    Sexy gear!
    Jake
    · Share on FacebookShare on Twitter
  • polkfarmboy
    polkfarmboy Posts: 5,703
    edited December 2013
    Mc's are on my audio bucket list, I thought those bel canto's are some of the best ice amps on the market.
    · Share on FacebookShare on Twitter
  • scottyboy76
    scottyboy76 Posts: 2,905
    edited December 2013
    ok, I officially hate your guts too now.


    okay, Im over it, congrats, but still jealous.
    humpty dumpty was pushed
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    edited January 2014
    Have you rolled the tubes yet? I keep reading people are loving the gold lion in that preamp.
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • schwarcw
    schwarcw Posts: 7,339
    edited January 2014
    A very nice pairing the 2300 with the 302!! Congrats on the great gear!
    Carl

    · Share on FacebookShare on Twitter
  • zane77
    zane77 Posts: 1,696
    edited January 2014
    So very nice, I hope your back recuperates!
    Home Theater
    Onkyo PR-SC5508 Sharp LC-70LE847U
    Emotiva XPA-5 Emotiva XPA-2 Emotiva UPA-2
    Front RTi-A9 Wide RTi-A7 Center CSi-A6 Surround FXi-A6 Rear RTi-A3 Sub 2x PSW505
    Sony BDP-S790 Dishnetwork Hopper/Joey Logitech Harmony One Apple TV
    Two Channel
    Oppo 105D BAT VK-500 w/BatPack SDA SRS 2.3 Dreadnought Squeezebox Touch Apple TV
    · Share on FacebookShare on Twitter
  • tonyb
    tonyb Posts: 32,981
    edited January 2014
    That's boner material man, congrats.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
    · Share on FacebookShare on Twitter
  • jacks2start
    jacks2start Posts: 98
    edited January 2014
    very nice setup,, cant go wrong with blue lighting,, same nice look that you get from the Marantz pieces.. congrats on the pruchase
    · Share on FacebookShare on Twitter
  • fjross
    fjross Posts: 183
    edited January 2014
    Very nice. I picked up the 352 with the C-45 preamp at Audio Classics a couple years ago. I was lucky enough to meet and deal withFrank Grow, who has now left us. I had an opportunity to upgrade the 352 to a pair a 501 mono blocks. My next step or dream is the MC 2200 or the MC 2300 to switch out the solid state C-45 to a tube preamp. ENJOY!
    Mcintosh MC-501 mono blocks
    Mcintosh C-45
    Mcintosh MVP-871
    PS AUDIO AV5000
    MIT 3.3 Shotgun biwire speaker interface
    MIT 3.3 Shotgun XLR interconnects
    Polk 2.3TL's Gimpod boards/F-1 modded crossovers/dynamat/JB weld/Larry's rings/Blackhole 5 strips
    Polk 3.1 TL's mint/stock (purchased new)
    Polk SDA-2's
    · Share on FacebookShare on Twitter
  • Polkitup2
    Polkitup2 Posts: 1,622
    edited January 2014
    erniejade wrote: »
    Have you rolled the tubes yet? I keep reading people are loving the gold lion in that preamp.

    Yep, Gold Lion gold pin re-issues. Better across the board compared to stock tubes IMHO.
    · Share on FacebookShare on Twitter
  • leftwinger57
    leftwinger57 Posts: 2,917
    edited January 2014
    Polki2 ,That is very nice stuff and I always drool when I see Mac stuff.I have to tell you I can't ever remember seeing a big Mac amp or any amp on the top shelf.It sits in a position of authority for sure and I hope your stand is up to the task.Me I would like onthe small side a 2105 and maybea 2250 or go like Jery did and have a Mac 2300. I don't care about the fans the tunes would drown that instantainiously.Call me mr envious....
    2chl- Adcom GFA- 555-Onkyo P-3150v pre/amp- JVC-QL-A200 tt- Denon 1940 ci cdp- Adcom GFS-6 -Modded '87 SDA 2Bs - Dynamat Ext.- BH-5- X-Overs VR-3, RDO-194 tweeters, Larry's Rings, Speakon/Neutrik I/C- Cherry stain tops Advent Maestros,Ohm model E

    H/T- Toshiba au40" flat- Yamaha RX- V665 avr- YSD-11 Dock- I-Pod- Klipsch #400HD Speaker set-

    Bdrm- Nikko 6065 receiver- JBL -G-200s--Pioneer 305 headphones--Sony CE375-5 disc
    · Share on FacebookShare on Twitter
  • Polkitup2
    Polkitup2 Posts: 1,622
    I have had the MC302 for about 8 years now and it stills performs perfectly, not a single issue ever. However, with it inside my Salamander double wide cabinet along with all my other gear including HT receiver, SACD player, DAC, and turntable the cabinet was just a pain in the arse to move anytime I wanted to change a component or cable.

    I decided the MC302 amp was the logical thing to jettison to reduce weight I researched many lighter replacement amps including many of the class D amps, but didn't find anything that jumped out at me. Instead, during the amp search I ended up lusting for a McIntosh MC462 - lol. It's even heavier than the MC302! Oh well, to compensate I decided to move to a single wide Salamander cabinet and off board the MC462 to a separate amp stand with casters.

    Now just the 2 month or more wait to get the MC462 due to COVID backlog.
    · Share on FacebookShare on Twitter
  • tratliff
    tratliff Posts: 1,703
    Polkitup2 wrote: »
    I have had the MC302 for about 8 years now and it stills performs perfectly, not a single issue ever. However, with it inside my Salamander double wide cabinet along with all my other gear including HT receiver, SACD player, DAC, and turntable the cabinet was just a pain in the arse to move anytime I wanted to change a component or cable.

    I decided the MC302 amp was the logical thing to jettison to reduce weight I researched many lighter replacement amps including many of the class D amps, but didn't find anything that jumped out at me. Instead, during the amp search I ended up lusting for a McIntosh MC462 - lol. It's even heavier than the MC302! Oh well, to compensate I decided to move to a single wide Salamander cabinet and off board the MC462 to a separate amp stand with casters.

    Now just the 2 month or more wait to get the MC462 due to COVID backlog.

    You will be very happy with the MC462. Its a great next logical step.

    2 Channel Rosso Fiorentino Volterra II, 2 REL Carbon Limited, Norma Revo IPA-140B, Lumin U2 Mini, VPI Prime w/SoundSmith Zephyr MIMC, Modwright PH 150, Denon DP-59l w/Denon DL-301MKII, WAY Silver 3 Ana+ Speaker Cables, WAY Silver 4+ Interconnect Cables, AudioQuest Niagara 7000 w/Dragon and Hurricane Power Cables
    · Share on FacebookShare on Twitter