got the carver tfm 35 up and running

scottyboy76
scottyboy76 Posts: 2,905
edited October 2013 in Electronics
It really does not sound very diff. from the tfm 25 below it, definitely more power.

Sprayed it and the ct-3 i got with it with deoxit d5, i had forgotten the slight sorta oily film it leaves, guess that eventually drys completely.

BTW, the guy i got these from asked if i wanted to haul his old tv off, its a vizio 42 in. 1080p lcd.

He said one day the video just screwed up.

He had replaced it with a samsung, i said no, there werent any tv repair shops up here, but thanks.

While using his restroom, i started thinking, "You will always wonder and regret not just throwin it in the car, so i did."

At first, it had vertical gray and black lines over app. 80% of screen.

i said oh well i will ask charity thrift stores if they want it, left the room, came back in app.10 min. and boom, a perfect picture, in fact a surprisingly excellent picture for a cheaper lcd.

We used it for the next couple of days, and once or twice, it started out with problem, then cleared right up, after clearing up, it does not matter how many times we turned it on and off, pic was fine.

I have looked at a few sites that sell diff. replacement boards for this tv, with a 30 day return, very reasonable prices, will probably take a chance if necessary in the future.
humpty dumpty was pushed
Post edited by scottyboy76 on

Comments

  • TNHNDYMAN
    TNHNDYMAN Posts: 2,145
    edited October 2013
    Good deal Scott. Glad the Carvers are good and the tv is just a bonus. Will try to call you later today, just trying to catch up from being out of town for 3 days. Got a little surprise to send your way.
    2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.

  • scottyboy76
    scottyboy76 Posts: 2,905
    edited October 2013
    we will be here, you know we stay up late, will tell deb to have the phone handy after we lay down to watch tv.
    humpty dumpty was pushed
  • PolkieMan
    PolkieMan Posts: 2,446
    edited October 2013
    Look for the thin ribbon cables that go to the circuit boards unplug them and clean them and reattach





    It really does not sound very diff. from the tfm 25 below it, definitely more power.

    Sprayed it and the ct-3 i got with it with deoxit d5, i had forgotten the slight sorta oily film it leaves, guess that eventually drys completely.

    BTW, the guy i got these from asked if i wanted to haul his old tv off, its a vizio 42 in. 1080p lcd.

    He said one day the video just screwed up.

    He had replaced it with a samsung, i said no, there werent any tv repair shops up here, but thanks.

    While using his restroom, i started thinking, "You will always wonder and regret not just throwin it in the car, so i did."

    At first, it had vertical gray and black lines over app. 80% of screen.

    i said oh well i will ask charity thrift stores if they want it, left the room, came back in app.10 min. and boom, a perfect picture, in fact a surprisingly excellent picture for a cheaper lcd.

    We used it for the next couple of days, and once or twice, it started out with problem, then cleared right up, after clearing up, it does not matter how many times we turned it on and off, pic was fine.

    I have looked at a few sites that sell diff. replacement boards for this tv, with a 30 day return, very reasonable prices, will probably take a chance if necessary in the future.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1
  • boston1450
    boston1450 Posts: 7,640
    edited October 2013
    The Carvers Looks great Scott & freebee is always a plus ;)
    ..
  • scottyboy76
    scottyboy76 Posts: 2,905
    edited October 2013
    PolkieMan wrote: »
    Look for the thin ribbon cables that go to the circuit boards unplug them and clean them and reattach

    Does it matter what i clean them with, would shack spray cleaner be suitable?

    I have caig deoxit gold cleaner, im out of d5.
    humpty dumpty was pushed
  • PolkieMan
    PolkieMan Posts: 2,446
    edited October 2013
    I just used a little paper alcohol wipes Scott and I noticed some black residue came off of them.
    Does it matter what i clean them with, would shack spray cleaner be suitable?

    I have caig deoxit gold cleaner, im out of d5.
    POLK SDA 2.3 TLS BOUGHT NEW IN 1990, Gimpod/Sonic Caps/Mills RDO-198
    POLK CSI-A6 POLK MONITOR 70'S ONKYO TX NR-808 SONY CDP-333ES
    PIONEER PL-510A SONY BDP S5100
    POLK SDA 1C BOUGHT USED 2011,Gimpod/Sonic Caps/Mills RDO-194
    ONKYO HT RC-360 SONY BDP S590 TECHNICS SL BD-1