dvd, progresssive or interlaced?

danger boy
danger boy Posts: 15,722
edited January 2004 in Electronics
i just got a new intergrated HDTV. I hooked up my Tohshiba DVD player using component video.. now which setting do i select? Progressive or interlaced on the player? I switched back and forth between the two.. and I don't see any diffference at all. i mean zero.

how about 3:2 pulldown.. does the TV do that automatically or what? I don't see any directions about 3:2 pulldown in the tv user manual.

TV is a 32" Zenith C32V37 intergrated HDTV (1080i) w/DVI

thanks, Al
PolkFest 2012, who's going>?
Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
Post edited by danger boy on
· Share on FacebookShare on Twitter

Comments

  • theatre_man
    theatre_man Posts: 22
    edited January 2004
    hey dangerboy, you need to set it to progressive, because if it is 480i, then 480p is better, but if it is 1080i.......im pretty sure it isn't, then you need to put it there.

    do you use component video?
    My Setup:
    Toshiba Theaterwide 51H83 HDTV
    Yamaha RX-V3300 reciever
    Yamaha CDC-585 cd
    Sony Progressive Scan dvd
    Wharfedale Evo-30 mains
    Wharfedale WH-2 side/rear surround
    Wharfedale Evo-Centre center
    Polk PSW-404 sub
    IXOS speaker wire and cables
    · Share on FacebookShare on Twitter
  • pjdami
    pjdami Posts: 1,894
    edited January 2004
    I use the progressive option. This link may be helpful:

    http://www.crutchfieldadvisor.com/learningcenter/home/dvd.html

    Paul
    · Share on FacebookShare on Twitter
  • theatre_man
    theatre_man Posts: 22
    edited January 2004
    oh and by the way.....my tv does 3:2 pulldown automatically, but i don't know about yours, most of them do as far as ive heard.
    My Setup:
    Toshiba Theaterwide 51H83 HDTV
    Yamaha RX-V3300 reciever
    Yamaha CDC-585 cd
    Sony Progressive Scan dvd
    Wharfedale Evo-30 mains
    Wharfedale WH-2 side/rear surround
    Wharfedale Evo-Centre center
    Polk PSW-404 sub
    IXOS speaker wire and cables
    · Share on FacebookShare on Twitter
  • dan t
    dan t Posts: 206
    edited January 2004
    Congrats on the HDTV. I would go for 480p on the DVD side.

    Dan
    · Share on FacebookShare on Twitter
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2004
    A bunch of the "HD" tube TV's don't do progressive. This is a sad fact I learned a couple weeks ago. A guy bought a Zenith "HDTV" monitor from us, and the only HD mode it will do is 1080i, and it would NOT even do 480p. Out of all the tube TV's in CC, I think only 3 would do 720p.

    Regards,
    PolkThug
    Never Forget
    · Share on FacebookShare on Twitter
  • shiznit311
    shiznit311 Posts: 95
    edited January 2004
    Thaks for the heads up on that Polkthug. I didn't realize that and would have been pissed when I finally broke down and got a HDTV for the bedroom.

    You should see a big difference in 480i and 480p. Even my mom could tell a difference...
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited January 2004
    yeah i don't know what's going on with my tv.. there isnt' any difference between 480i and 480p. when viewing a dvd.

    tv says it can do 480i/p, 720p, and 1080i

    DVD's are what 480? so does that mean its not even 525 lines of resoultion as TV's should be in a 4:3 format?
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • dan t
    dan t Posts: 206
    edited January 2004
    Just curious, what kind/type of video cables are you using?

    Dan
    · Share on FacebookShare on Twitter
  • danger boy
    danger boy Posts: 15,722
    edited January 2004
    i'm using Monster video 3 component cables. 2 meter
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
    · Share on FacebookShare on Twitter
  • petertkim
    petertkim Posts: 4
    edited January 2004
    one reason you do not see any difference may be because your tv is automatically upconverting everything to either 480p or 1080i.
    · Share on FacebookShare on Twitter
  • PolkThug
    PolkThug Posts: 7,532
    edited January 2004
    Does your TV have an "info" button that tells you what signal you are receiving? Verify that the TV is seeing 480i or 480p.
    Never Forget
    · Share on FacebookShare on Twitter