4 ohm stable amp
cstmar01
Posts: 4,424
Looking for either a 2, 3 or 5 channel amp that is 4 ohm stable for running my Lsi for an HT set up off of.
I'm not looking for anything special, and trying to keep the budget low for this like around 500 or so. I have a Pioneer Elite that I'm using as a pre amp. I would like to try and get a 3 or 5 channel amp but can look at a 2 as well for now.
There was a Parasound couple weeks ago I was trying to get off the Gon but never responded and was gone in a few days
I'm not looking for anything special, and trying to keep the budget low for this like around 500 or so. I have a Pioneer Elite that I'm using as a pre amp. I would like to try and get a 3 or 5 channel amp but can look at a 2 as well for now.
There was a Parasound couple weeks ago I was trying to get off the Gon but never responded and was gone in a few days
Post edited by cstmar01 on
Comments
-
I'm not sure the specs, but I have an Adcom GFA 7000 ch amp. $325 or $360 shipped. I'll have to look into the online details to see if ok w/ 4ohm load. Maybe someone else on here has more experience with it and can provide more details. I acquired it a couple weeks ago in a pkg deal on some speakers I wanted and don't have a need for it.2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.
-
I'm not sure the specs, but I have an Adcom GFA 7000 ch amp. $325 or $360 shipped. I'll have to look into the online details to see if ok w/ 4ohm load. Maybe someone else on here has more experience with it and can provide more details. I acquired it a couple weeks ago in a pkg deal on some speakers I wanted and don't have a need for it.
No need. I run my LSi's off of one and it is 4ohm stable, I believe 200w @ 4ohm. I have even pushed mine past the '0' mark on my Elite and it still ran the 9's fine. I've been very happy with it, pricewise thats a great deal on any five channel amp. -
I have a couple of NAD amps available that are 4 ohm stable at that price range available (208,218 THX).SRT For Life; SDA Forever!
The SRT SEISMIC System:
Four main satellite speakers, six powered subs, two dedicated for LFE channel, two center speakers for over/under screen placement and three Control Centers. Amaze your friends, terrorize your neighbors, seize the audio bragging rights for your state. Go ahead, buy it; you only go around once. -
I'm not sure the specs, but I have an Adcom GFA 7000 ch amp. $325 or $360 shipped. I'll have to look into the online details to see if ok w/ 4ohm load. Maybe someone else on here has more experience with it and can provide more details. I acquired it a couple weeks ago in a pkg deal on some speakers I wanted and don't have a need for it.
Sounds like a deal to me as that will fit the bill nicely.
I tried to send you a PM but didn't work. Let me know how you would like payment. -
Room in box now. Send me a PM with contact info and I'll give you a call this evening to work out details.2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.
-
Sorry the box was full again cstmar... all these chatterboxes on here want to talk to me for some reason
It would be nice if I could keep more than 20 msg in my inbox but no big deal. I took some pics for you. Looks pretty good overall. At least one decent size scratch w/ paint off on each side but overall in a rack I doubt anyone would ever know. The front looks good and all works well. 2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer. -
What about one of the Carver 5 channel amps, if you don't grab TNHNDYMANs amp?
-
Jake, I'm going to go with the Adcom for now but will let you know. The adcom will fit the bill very nicely!
-
That Adcom looks massive cstmar and what a sweet price!
-
Polkie2009 wrote: »That Adcom looks massive cstmar and what a sweet price!
I'm pretty excited as this HT is coming along nicely. I'm going to be putting a 100" screen into a 12X16 spare bedroom of mine so the amp will be more than enough for the room. Not like I'm going to be running at 105dB or anything lol. -
100" screen, dang, that's what I'm talking about!!! That big Adcom will be right at home. You may not need to always run all those watts, but it sure is nice to have that extra headroom. :cheesygrin:
-
Looks like it will be delivered by Monday. Let me know how it arrives and that its working when you get a chance to install please. Thanks for the purchase.2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.
-
Tracking shows delivered around 2pm, let me know if it arrived safe when you get home. Thanks.2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.
-
Will do, at work now so will be home later seeing I was sick this morning
-
Got it everything works great and will be a good match. Thanks Again!
-
Great! Hope you will be very pleased with it. Thanks for the timely payment and great transaction. Travis2-ch System: Parasound P/LD 2000 pre, Parasound HCA-1000 amp, Parasound T/DQ Tuner, Phase Technology PC-100 Tower speakers, Technics SL-1600 Turntable, Denon 2910 SACD/CD player, Peachtree DAC iT and X1asynchorus USB converter, HSU VTF-3 subwoofer.
