Cleaning out the closet.....
SDA1C
Posts: 2,072
One complete set of two 12" passive, eight 6.5 in mid and four sets of tweeter rings, with gaskets to match. $110 shipped.
One set of tweeter rings for rd-0 for (two tweets) with gaskets. No pic-like the ones in the complete set. $20 shipped.
Two sets of Gimpods SDA 1C/2.3 boards new in the sleeve. $80 shipped per set.
One set new in the package Cardas CCGR long 5 way binding post. Bought for cs350ls. $25 shipped
One Alpha-Core 16 AWG .30 mH copper foil inductor coil. Bought for the cs350ls. $25 Shipped.
One set of fair condition SDA1C cabinets with PR. Grilles are good. $12 pack of Sam Adams on ice.
I will match any price that these parts have sold for prior to this post. I do not remember exactly what I paid so I just guessed (Low if I remember correctly). If it is too high show me, if it's too low my loss your gain.
One set of tweeter rings for rd-0 for (two tweets) with gaskets. No pic-like the ones in the complete set. $20 shipped.
Two sets of Gimpods SDA 1C/2.3 boards new in the sleeve. $80 shipped per set.
One set new in the package Cardas CCGR long 5 way binding post. Bought for cs350ls. $25 shipped
One Alpha-Core 16 AWG .30 mH copper foil inductor coil. Bought for the cs350ls. $25 Shipped.
One set of fair condition SDA1C cabinets with PR. Grilles are good. $12 pack of Sam Adams on ice.
I will match any price that these parts have sold for prior to this post. I do not remember exactly what I paid so I just guessed (Low if I remember correctly). If it is too high show me, if it's too low my loss your gain.
Too much **** to list....
Post edited by SDA1C on
Comments
-
Oops, edit......:redface:
I thought that was a set of 4 Cardas.
Ohh, I hate to see this "parting out" of your own stuff Dan!
Testing
Testing
Testing -
I'll take one set of boards and the Cardas bp. The beer sounds nice, but I'll have to pass.
Craigb]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet -
List of remains
One set of tweeter rings for rd-0 for (two tweets) with gaskets. No pic-like the ones in the complete set. $20 shipped.
One set of Gimpods SDA 1C/2.3 boards new in the sleeve. $80 shipped.
One set of fair condition SDA1C cabinets with PR. Grilles are excellent. 6er of Sam Adams on ice.
All other is sold pending payment.Too much **** to list.... -
Dangit...if I wasn't picking up 4 LSi15s and an LSiC in Princeton, IL I would be all over the cabinets.
And would bring you far better beer than Sam Adams (Although, Boston Lager is my favorite BBQ beer)"Some people find it easier to be conceited rather than correct."
"Unwad those panties and have a good time man. We're all here to help each other, no matter how it might appear." DSkip -
I'll take one set of boards and the Cardas bp. The beer sounds nice, but I'll have to pass.
Craig
That is a sweet score!
Very nice, and Dan is an good guy!:cheesygrin:Testing
Testing
Testing -
Saturday bump.
Looks like I may be stuck with the cabs but I know someone needs a NEW set of SDA boards from Gimpod for 20% off. One set left.Too much **** to list.... -
-
Dude you really should use those boards....
-
Got' em in excellent shape. Many thanks!
Craigb]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet -
You bet Craig. I know you'll like the improvements. I know I did when I did my 1c.Too much **** to list....
-
Oh yeah, love my 4.1TL's. I couldn't have done it without gimpod's boards, info, and the wip posts of several here. 1.2's are next (not sure whether to TL them) and then my sons' 1C's or 2B's. If my srs2's were not the 2-piece round xo's, I'd buy that last pair from you in a flash.b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet -
Oh yeah, love my 4.1TL's. I couldn't have done it without gimpod's boards, info, and the wip posts of several here. 1.2's are next (not sure whether to TL them) and then my sons' 1C's or 2B's. If my srs2's were not the 2-piece round xo's, I'd buy that last pair from you in a flash.
They really are the cheese! You need another set, I know you do LOL.Too much **** to list.... -
What's a Gimbod?2chl- Adcom GFA- 555-Onkyo P-3150v pre/amp- JVC-QL-A200 tt- Denon 1940 ci cdp- Adcom GFS-6 -Modded '87 SDA 2Bs - Dynamat Ext.- BH-5- X-Overs VR-3, RDO-194 tweeters, Larry's Rings, Speakon/Neutrik I/C- Cherry stain tops Advent Maestros,Ohm model E
H/T- Toshiba au40" flat- Yamaha RX- V665 avr- YSD-11 Dock- I-Pod- Klipsch #400HD Speaker set-
Bdrm- Nikko 6065 receiver- JBL -G-200s--Pioneer 305 headphones--Sony CE375-5 disc -
leftwinger57 wrote: »What's a Gimbod?
I'm assuming the question is sincere. My apologies if it was made in jest.
Gimpod=the Polkie bearing that username.
Gimpod board= Custom SDA circuit boards designed by Gimpod.
A few related links:
Gimpod's original circuit board thread
Gimpod's Round 2 thread
Gimpod's excellent info site
Neil's 4.1tl thread
Trey's SDA Mod Consolidator pageb]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet -
Bump someone needs a new set of boards I just know it.Too much **** to list....
-
Do you still have the passives?Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
I do have the passives. They look crappy though. There was a big scratch on one when I got them and they both are the kind with that funky foam glued to it. No way are they furniture presentable.Too much **** to list....
-
One set of tweeter rings for rd-0 for (two tweets) with gaskets. No pic-like the ones in the complete set. $20 shipped.
If these are still around I may take them off your hands.... I believe they would work perfect for my RTA 11TL's and then I would just need to get the rings for the 2 sets of 6.5 drivers at a later date...."....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963) -
I do have the passives. They look crappy though. There was a big scratch on one when I got them and they both are the kind with that funky foam glued to it. No way are they furniture presentable.
OK, thanks for the response...Guess I will pass on them.Pio Elete Pro 520
Panamax 5400-EX
Sunfire TGP 5
Micro Seiki DD-40 - Lyra-Dorian and Denon DL-160
PS Audio GCPH phono pre
Sunfire CG 200 X 5
Sunfire CG Sig 405 X 5
OPPO BDP-83 SE
SDA SRS 1.2TL Sonicaps and Mills
Ctr CS1000p
Sur - FX1000 x 4
SUB - SVS PB2-Plus
Workkout room:
Sony Bravia XBR- 32-Inch 1080p
Onkyo TX-DS898
GFA 555
Yamaha DVD-S1800BL/SACD
Ft - SDA 1C
Not being used:
RTi 38's -4
RT55i's - 2
RT25i's -2, using other 2 in shop
LSI 15's
CSi40
PSW 404 -
EndersShadow wrote: »If these are still around I may take them off your hands.... I believe they would work perfect for my RTA 11TL's and then I would just need to get the rings for the 2 sets of 6.5 drivers at a later date....
Sorry Ender, I put them in a kit that go with the 5jr+ that are soon for sale.Too much **** to list.... -
Sorry Ender, I put them in a kit that go with the 5jr+ that are soon for sale.
No worries mate, my fault for waiting so long.
Good luck on that sale!"....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963) -
PM sent on the Gimpod boards.
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."![:\](https://forum.polkaudio.com/resources/emoji/confused.png ":\")
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
This is the set I have left. I am not sure if it's the same set as the first pic so I figured I'd post another.Too much **** to list.... -
EndersShadow wrote: »No worries mate, my fault for waiting so long.
Good luck on that sale!
Thanks,
Did you find 8 inch rings for the PR's on the 11t?Too much **** to list.... -
I think it's the 2012 modification boards I need. The hole to fasten the board to the inductor by the (.874mH) L2 inductor seems too close to be the newer board. Also, the P and R holes are a little further apart on the newer (modified) crossover board. I cannot tell for sure by the picture which version the board is. Does anyone remember when the board modifications took place by Tony?
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
It looks like the 2012 board on his page matches the changes you mention. On the 2012 board the L2 is slightly more to the right and the P and R are in line with the mounting hole.
I am curious, what are you putting on there that doesn't fit the 2011 board?Too much **** to list.... -
Thanks,
Did you find 8 inch rings for the PR's on the 11t?
Larry doesn't make em but he though I might be able to mod the 6.5 ones to work."....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963) -
It looks like the 2012 board on his page matches the changes you mention. On the 2012 board the L2 is slightly more to the right and the P and R are in line with the mounting hole.
I am curious, what are you putting on there that doesn't fit the 2011 board?
I already have a set of the older boards with everything mounted. I am going to be replacing the inductors on the boards and was thinking a way of diconnecting the SDA inductor would be nice.
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
EndersShadow wrote: »Larry doesn't make em but he though I might be able to mod the 6.5 ones to work.
I gotcha. Just chop it into 4 pieces and remove the material in the way. Sounds good. Why not use t nuts in that case?Too much **** to list.... -
I already have a set of the older boards with everything mounted. I am going to be replacing the inductors on the boards and was thinking a way of diconnecting the SDA inductor would be nice.
Interesting. I'll follow your progress with interest.Too much **** to list....
