NoRez or Black Hole 5
Conradicles
Posts: 6,081
If anybody has any leftovers I am interested. This is one of the last things I need to complete my SDA 2.3TL upgrade. I can pay cash or trade various RCA interconnects.
Thanks!
Eric.
Thanks!
Eric.
Post edited by Conradicles on
Comments
-
Conradicles wrote: »If anybody has any leftovers I am interested. This is one of the last things I need to complete my SDA 2.3TL upgrade. I can pay cash or trade various RCA interconnects.
Thanks!
Eric.
I've got one piece (23.5 inches x 7.0 inches), if that's enough to be useful to you.Family Room, Innuos Statement streamer (Roon Core) with Morrow Audio USB cable to McIntosh MC 2700 pre with DC2 Digital Audio Module; AQ Sky XLRs to CAT 600.2 dualmono amp, Morrow Elite Speaker Cables to NOLA Baby Grand Reference Gold 3 speakers. Power source for all components: Silver Circle Audio Pure Power One with dedicated 20 amp circuit to main panel.
Exercise Room, Innuos Streamer via Cat 6 cable connection to PS Audio PerfectWave MkII DAC w/Bridge II, AQ King Cobra RCAs to Perreaux PMF3150 amp (fully restored and upgraded by Jeffrey Jackson, Precision Audio Labs), Supra Rondo 4x2.5 Speaker Cables to SDA 1Cs (Vr3 Mods Xovers and other mods.), Dreadnaught with Supra Rondo 4x2.5 interconnect cables by Vr3 Mods. Power for each component from dedicated 20 amp circuit to main panel, except Innuos Statement powered from Silver Circle Audio Pure Power One. -
Thanks Moose. Which type do you have?
-
Sometimes you can also find good scraps on ebay too; good luck!
-
Conradicles wrote: »Thanks Moose. Which type do you have?
I apologize for my ignorance, but I didn't know there was more than one type. There is no indication of a "type" on the piece.
It is ~1.375" thick and consists of four separate layers of "foam" -- thin black on top, thick gray, thin very dense light gray, medium thick light gray affixed to a fairly rigid backing that has adhesive on it.
Here's a picture of the BH 5 inside my SRSs:
Hope this helps.Family Room, Innuos Statement streamer (Roon Core) with Morrow Audio USB cable to McIntosh MC 2700 pre with DC2 Digital Audio Module; AQ Sky XLRs to CAT 600.2 dualmono amp, Morrow Elite Speaker Cables to NOLA Baby Grand Reference Gold 3 speakers. Power source for all components: Silver Circle Audio Pure Power One with dedicated 20 amp circuit to main panel.
Exercise Room, Innuos Streamer via Cat 6 cable connection to PS Audio PerfectWave MkII DAC w/Bridge II, AQ King Cobra RCAs to Perreaux PMF3150 amp (fully restored and upgraded by Jeffrey Jackson, Precision Audio Labs), Supra Rondo 4x2.5 Speaker Cables to SDA 1Cs (Vr3 Mods Xovers and other mods.), Dreadnaught with Supra Rondo 4x2.5 interconnect cables by Vr3 Mods. Power for each component from dedicated 20 amp circuit to main panel, except Innuos Statement powered from Silver Circle Audio Pure Power One. -
Just buy some from sonicraft. I think I used most of 2 sheets on mine. I also went a bit wider and filled the space between the braces from just above the passive to the top of the cabinet. Bass is perfect, as are the mids. At least to me.Turntable: Empire 208
Arm: Rega 300
Cart: Shelter 501 III
Phono Pre: Aural Thrills
Digital: Pioneer DV-79ai
Pre: Conrad Johnson ET3 SE
Amp: Conrad Johnson Evolution 2000
Cables: Cardas Neutral Reference
Speakers: SDA 2.3TL, heavily modified -
Hmmmm. I'll have to be trying some of this...... (BH5, that is)
Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
"I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion."![:\](https://forum.polkaudio.com/resources/emoji/confused.png ":\")
My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....
"Green leaves reveal the heart spoken Khatru"- Jon Anderson
"Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee -
Just buy some from sonicraft. I think I used most of 2 sheets on mine. I also went a bit wider and filled the space between the braces from just above the passive to the top of the cabinet. Bass is perfect, as are the mids. At least to me.
I bought two sheets, like quadzila, and the piece I have left is the remainder after I applied BH 5 to my SRSs and 1Cs. It's $69.95/sheet. If Eric can pick up a few sheets like mine (for which I have no immediate use), he might be able to save a bit of money.
I, too, think it made a positive change in the sound from my SRSs. I have not yet managed to get my upgraded crossovers reinstalled in the 1Cs. Trey (VR3 Mods) did a great job building crossovers for both sets of speakers, but I am still trying to reconfigure the way the 1C crossovers will be mounted inside the cabinets of the speakers.Family Room, Innuos Statement streamer (Roon Core) with Morrow Audio USB cable to McIntosh MC 2700 pre with DC2 Digital Audio Module; AQ Sky XLRs to CAT 600.2 dualmono amp, Morrow Elite Speaker Cables to NOLA Baby Grand Reference Gold 3 speakers. Power source for all components: Silver Circle Audio Pure Power One with dedicated 20 amp circuit to main panel.
Exercise Room, Innuos Streamer via Cat 6 cable connection to PS Audio PerfectWave MkII DAC w/Bridge II, AQ King Cobra RCAs to Perreaux PMF3150 amp (fully restored and upgraded by Jeffrey Jackson, Precision Audio Labs), Supra Rondo 4x2.5 Speaker Cables to SDA 1Cs (Vr3 Mods Xovers and other mods.), Dreadnaught with Supra Rondo 4x2.5 interconnect cables by Vr3 Mods. Power for each component from dedicated 20 amp circuit to main panel, except Innuos Statement powered from Silver Circle Audio Pure Power One. -
Just buy some from sonicraft
That is what I will do. Just wanted to check and see if anybody had extra. I love our "Wanted" section of the forum...it has helped me several times and I have helped a few as well.
