In-ceiling speaker install

hochpt21
hochpt21 Posts: 5,423
edited February 2013 in Speakers
Hello all.

Just wanted to share a few pics of my RC80i in-ceiling speaker install project. This is in the basement area of our new house.

I was a little intimidated at first as I am fairly handy, but by no means a professional, but once I dug in...it actually turned out to be pretty fun, and very rewarding.

Here goes...

I got pretty lucky A) that there was drop ceiling and B) there were floor/ceiling joists that were perfectly spaced for the project.
FEB 2013 029.JPG


I took some 1"x8" boards and cut and nailed them to create a 'box' for the speaker.
FEB 2013 030.JPG


Next I stapled some insulation in said box.
FEB 2013 031.JPG


Then I attached some MDF to the ceiling tile to help support the weight of the speaker.
FEB 2013 032.JPG
FEB 2013 033.JPG


Then I just slid that sucker back up in the ceiling and ran the speaker wire through the ceiling tiles to the back of the room where the AVR is.
FEB 2013 034.JPG


Hope you like...

Once we fix our little water pipe incident, I will post pics of the whole basement home theater project!
2 ChannelTurntable - VPI Classic 2/Ortofon 2M BlueAmplification - Rogue Audio Cronus Magnum II, Parks Audio Budgie PhonoSpeakers - GoldenEar Triton 17.2 Home TheaterDenon AVR-X3300W; Rotel RMB-1066; Klipsch RP-280F's, Klipsch RP-450C, Polk FXi3's, Polk RC60i; Dual SVS PB 2000's; BenQ HT2050; Elite Screens 120"Man CaveTurntable - Pro-Ject 2.9 Wood/Grado GoldAmplification - Dared SL2000a, McCormack DNA 0.5 DeluxeCD: Cambridge AudioSpeakers - Wharfedale Linton 85th Anniversary; LSiM 703; SDA 2A
Post edited by hochpt21 on

Comments

  • wallstreet
    wallstreet Posts: 1,405
    edited February 2013
    Well done. I'm sure those will sound very nice.
  • leroyjr1
    leroyjr1 Posts: 8,785
    edited February 2013
    Nice, installed some inceilings myself and came to realize its was a very easy process. All in all it took me less than 1 hours to install and run wires.
  • RamZet
    RamZet Posts: 792
    edited February 2013
    cool beans. Looks good.
    B&W CM9Classé Sigma
  • gudnoyez
    gudnoyez Posts: 8,101
    edited February 2013
    Very nice job well done!
    Home Theater
    Parasound Halo A 31 OnkyoTX-NR838 Sony XBR55X850B 55" 4K RtiA9 Fronts CsiA6 Center RtiA3 Rears FxiA6 Side Surrounds Dual Psw 111's Oppo 105D Signal Ultra Speaker Cables & IC's Signal Magic Power Cable Technics SL Q300 Panamax MR4300 Audioquest Chocolate HDMI Cables Audioquest Forest USB Cable

    2 Channel
    Adcom 555II Vincent SA-T1 Marantz SA 15S2 Denon DR-M11 Clearaudio Bluemotion SDA 2.3tl's (Z) edition MIT Terminator II Speaker Cables & IC's Adcom 545II Adcom Gtp-450 Marantz CD5004 Technics M245X SDA 2B's, SDA CRS+

    Stuff for the Head
    JD LABS C5 Headphone Amplifier, Sennheiser HD 598, Polk Audio Buckle, Polk Audio Hinge, Velodyne vPulse, Bose IE2, Sennheiser CX 200 Street II, Sennheiser MX 365

    Shower & Off the beaten path Rigs
    Polk Audio Boom Swimmer, Polk Audio Urchin B)
  • hochpt21
    hochpt21 Posts: 5,423
    edited February 2013
    leroyjr1 wrote: »
    Nice, installed some inceilings myself and came to realize its was a very easy process. All in all it took me less than 1 hours to install and run wires.

    Took me more than an hour, but wasn't as hard as I thought it would be. I only got to enjoy them for about 5 min before the water pipe burst. I've since listened more and they sound really nice. Won't be able to fully calibrate until we get that pipe fixed soon.
    2 ChannelTurntable - VPI Classic 2/Ortofon 2M BlueAmplification - Rogue Audio Cronus Magnum II, Parks Audio Budgie PhonoSpeakers - GoldenEar Triton 17.2 Home TheaterDenon AVR-X3300W; Rotel RMB-1066; Klipsch RP-280F's, Klipsch RP-450C, Polk FXi3's, Polk RC60i; Dual SVS PB 2000's; BenQ HT2050; Elite Screens 120"Man CaveTurntable - Pro-Ject 2.9 Wood/Grado GoldAmplification - Dared SL2000a, McCormack DNA 0.5 DeluxeCD: Cambridge AudioSpeakers - Wharfedale Linton 85th Anniversary; LSiM 703; SDA 2A
  • chumlie
    chumlie Posts: 8,658
    edited February 2013
    Nice work Baller !!!