Dvi?

danger boy
danger boy Posts: 15,722
edited December 2003 in Electronics
anyone using DVI connector between your DVD player and your TV? I guess this by passes the digital to analog and analog to digital conversion.. resulting in a more pure signal.. sound like fun stuff.

DVI = digital video interface? anyone shead any light on this connectors?
PolkFest 2012, who's going>?
Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
Post edited by danger boy on

Comments

  • brettw22
    brettw22 Posts: 7,623
    edited December 2003
    nope...........:D
    comment comment comment comment. bitchy.
  • ezc
    ezc Posts: 426
    edited December 2003
    dvi cables are usually limited to about 15' & longer runs are possible with a amplifer. We have only sold a few dvi cables so far. I have seen a customers setup with a DVHS 4000 player to a sam sung STB via firewire & from the SS STB to the display via DVI. The picture was noticibly better than component. He was able to show me comp & switch to dvi & the dvi was impressive, escpeially since it was playing a HD DVHS. Im not sure what the cost for the JVC 4000 or the SS STB costs but it did make a difference. Only thing is bad the short runs & the connector is huge! Id wish they settle on a smaller connector like fire wire! But I guess its all about security, & copy protection..
  • danger boy
    danger boy Posts: 15,722
    edited December 2003
    yeah i read that a few select DVD players which are just coming out have DVI outputs connectors. and a few HDTV's do as well. i guess everything stays in the digital domain. resulting in a improved picture. :D
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
  • TheGrayGhost
    TheGrayGhost Posts: 196
    edited December 2003
    I’m typing this post on a RF keyboard from the comfort of my recliner while viewing the desktop on a 50” DLP RPTV. Biggest computer monitor I’ve ever seem.

    I use a computer for my entire movie and HDTV viewing over DVI connection to the DLP TV. For the Windows desktop I use the DVI output from an ATI Radeon 9000 graphics card connected to a MyHD HDTV tuner card by a short DVI loopback cable and the MyHD card is connected to the DVI input on the TV with a 12’ cable.

    I can watch DVD movies from the graphics card using a software DVD player or from the MyHD card using hardware decoding in the same manner as the HDTV decoding. All resolutions are set to the native resolution of the DLP TV that is 1280x720p. I prefer the hardware decoding in the MyHD card to the software decoding because it is more 3D with better color saturation than the Radeon card provides, plus the hardware decoder does a better job of decoding video source DVD such as concert videos.

    I also have a Mits D-VHS tape recorder connected to the computer via Firewire that I use to record/playback from the MyHD HDTV card. In addition to the D-VHS recorder, MyHD can record HDTV to a local or LAN server hard drive.

    The desktop, DVD, and HDTV are sharp as a tack. Awesome!

    I think the gentleman above has the cables mixed up. I believe it is Firewire that is limited to 15’ instead of DVI. I’ve tested a 30’ dual link DVI cable without any loss of image quality.
    Best Regards, Cliff
  • danger boy
    danger boy Posts: 15,722
    edited December 2003
    thanks Cliff,

    owie, my head hurts now.. :p

    i just found out about DVI connections.. and I was wondering if there was any or much improvement over what is typically the best we can get currently.. component video.

    thanks, Al
    PolkFest 2012, who's going>?
    Vancouver, Canada Sept 30th, 2012 - Madonna concert :cheesygrin:
  • thehalo8
    thehalo8 Posts: 127
    edited December 2003
    There are not too many companies making electronics with DVI connectors at this time. Within the next year we should start seeing a lot more DVD players and receivers with DVI connectors. The quality difference over component is much better.
    Mains: Polk RTi70's
    Center: Polk CSi40
    Surrounds: Polk TC60i's
    Sub: Polk PSW505
    Receiver: Onkyo TX-DS696
    TV: Samsung HLS 5687W 56"
    DVD: Sony DVP S5300
    Protection: Monster HTS 3600
    Backup Battery: Belkin AP3080010
  • twochannel
    twochannel Posts: 171
    edited December 2003
    We have a Sony 50xbr800 lcd set and a Hd200 reciever with DVI. I first used the Sony dvi cable that came with the reciever and found much better picture using the component inputs and Monster M1000 cables. I just ordered the M500 dvi cable from Monster to see if there is much improvement over the cheap Sony one. Their was much more detail and smoother movement using the component inputs.
  • bikezappa
    bikezappa Posts: 2,463
    edited December 2003
    I have a NEC 1000 DLP front projector on an 10 foot diagonal screen. I purchased a Bravo DVD player for $200. Both units have DVI connections. Me and five other people spent hours going back and fourth between a DVD Sony (component connection) and DVD Bravo (DVI connection). We had all the trick settings and new down load to the Bravo recommended by various projector sites. With the exception of one movie nobody saw any picture difference between the two set-ups. I returned the Bravo and the 15 foot DVI cable. Sorry. I was very hopeful also.
  • scottvamp
    scottvamp Posts: 3,277
    edited December 2003
    All my research has come to quality component cables are as good or in most cases better than DVI. DVI is not nessasarily being pushed as a better connection bettween DVD and monitors.
    It was being pushed for HDTV monitors and thier ability to upconvert video signals to "higher" ratios. 720/1080
    And no one has been impressed by these ability. You PQ is only as good as the source.