SRS 1.2, SDA 2tl and ADS 810 for sale

bluecomet
bluecomet Posts: 1,118
edited December 2012 in For Sale (FS) Classifieds
I am on the verge of picking up a SRT system, so I have decided to downsize some of my collection. All speakers are for local pickup. I will be giving Polkies the first opportunity to buy these before they go on ebay.

First up are the SRS 1.2 speakers. All of the tweets have been upgraded to RDO-194's. The speakers are in excellent condition. They come with the IC. The price is $1,700

The next in line is a set of SDA2 tl's that were Hamatym's. They had every mod done to them and are in excellent condtion. It comes with a IC. The only change I made is install SL3000 tweets because I liked the sound better with these particular speakers. This is plug and play. All the work has been done. The price is $550

The last set are the ADS 810's. They are solid wood and sound excellent with no issues. One of the grilles is missing the ADS logo and has a small faint water stain on the bottom corner of the grille. The price is $300

I will be posting pictures tomorrow.
Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
Yamaha RX-V2500 System, Carver A753 3 channel amp.

Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
Post edited by bluecomet on

Comments

  • GlennDog
    GlennDog Posts: 3,121
    edited July 2012
    GLWTS! Can you post pix of the 1.2s . . . ty
    AC Regenerator PS Audio PerfectWave Power Plant 10
    Source Lumin U1 Mini into Lampizator Baltic 4 DAC
    Pre Cary SLP-05
    Power Rogue M180 Dark monos
    Mains Salk HT2-TL
    Rythmik F12
  • mhardy6647
    mhardy6647 Posts: 34,005
    edited July 2012
    May I just say that the ads L-810 is a superb speaker; if you like the vintage Polk monitor series sound, you'll love these.
  • vcwatkins
    vcwatkins Posts: 1,993
    edited July 2012
    I'll take the SRS 1.2's if you can give me a week or two to pick up. PM sent.

    Craig
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • Tony M
    Tony M Posts: 11,197
    edited July 2012
    vcwatkins wrote: »
    I'll take the SRS 1.2's if you can give me a week or two to pick up. PM sent.

    Craig

    Congrats !!
    Most people just listen to music and watch movies. I EXPERIENCE them.
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    Here are some pictures of the speakers for sale plus I am going to sell some speaker stands. I am not sure who made the stands but they do a nice job holding larger speakers like the ADS 810 speakers off the ground about 6 inches. The stands are $30 plus shipping.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • Toolfan66
    Toolfan66 Posts: 17,341
    edited July 2012
    Looks like those 1.2's need some new crossover plates..:cheesygrin: and I know someone around here still has a few sets..:razz:
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
  • vcwatkins
    vcwatkins Posts: 1,993
    edited July 2012
    Your PM box is full bluecomet.

    I'm good with details that you PM'd and will send further info via PM when able. If needed, you can get me at vcwatkins AT yahoo DOT com.

    Thanks,
    Craig
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    I cleared the PM box. You can contact me now. The one crossover plate is sun faded. The other is good. The picture is not the best.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    Sorry the CRS's are staying but if I change my mind I will let you know.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    The CRS+'s with the pin/blade IC. They are currently sitting on my SRS 2's in the picture but I do have the original stands for them. One of these days I will have to have a family picture of my Polk collection. The SRS 1.2 sale is currently pending to vcwatkins.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    Bump for SDA2 tl and ADS 810's.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    Last bump for highly modded SDA2 tl's and a nice set of ADS 810's.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • vcwatkins
    vcwatkins Posts: 1,993
    edited July 2012
    Toolfan66 wrote: »
    Looks like those 1.2's need some new crossover plates..:cheesygrin: and I know someone around here still has a few sets..:razz:

    Would these be red or gold?
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • vcwatkins
    vcwatkins Posts: 1,993
    edited July 2012
    It was a pleasure to meet and chat briefly with Bluecomet, even though I was completely out of it from the 12 hour drive and have no idea what I said LOL. Fortunately the Big Boys fit flat in the Yukon. I was a bit worried that we'd have to turn one onside, but it wasn't necessary. We got them unloaded and hooked up last night and I am very pleased.

    What I didn't expect was improved HF detail over the SRS2's they are replacing. In fact they are approaching the 707's in that respect.Very airy and smooth. Plucked acoustic strings have a fullness and sparkle that is more pleasing than the SRS2's and 707's. The soundstage is not quite as mind-blowingly wide and precise as the SRS2's and the mid-range seems a tad subdued and less warm; but I expect these will improve with Dynamat, Armacell, rings, and spikes.

    Another pleasant surprise has to do with the 707's. I had to move them wider by 6" o.c. and toe them in a bit more, and the sound is remarkably better. Weird how these are so, mmm... finicky with placement. They are 12ft apart right now.:eek: I had pretty much resigned myself to selling the 707's in order to buy Bluecomet's 1.2's and do the upgrades. But, sheesh, these things just keep pulling me in with their outstanding detail. Easily the best I've heard at low volume levels and incredibly realistic in HT. To me the two speakers are fascinating to A-B. Completely different approaches and similarly excellent results. I know one thing - It's going to be very hard to let the 707's go.

    Thanks, Bluecomet, for the easy transaction and the chance to own some great speakers.

    Craig
    b]Beach Audio[/b]: Rega RP6 (mods) - AT33PTG/II - Parks Budgie SUT - PSAudio NPC * Eversolo DMP-A6 * Topping D90iii * Joule-Electra LA-100 mkIII * Pass Aleph 30 * MIT S3 * Polk SRS 2.3tl (mods) * PSAudio PPP3
    Beach Study: Pro-Ject Stream Box S2 Ultra & Pre Box S2 * Pass ACA * DH Labs SS Q10 * Brines Folded ML-TQWT RS 40-1354 * PSA Dectet
    Beach Master: WiiM Pro * Dayens Menuetto * Zu Libtec * Dynaudio Audience 50
    Beach Den: Bluesound Powernode 2i * DH Labs SS Q10 * Zu Omen DWII * Richard Gray RGPC
    Town Study: WiiM Pro * Chord Qute (Pardo) * Elekit TU-8600 * MIT S3 * Revel M22 * Beyer DT-990 * Shunyata Hydra 2
    Town Den: Music Hall mm5.1se - Denon DL-103r - Jolida JD9ii (mods) * WiiM Pro * Cary xCiter * Rogue 99 Magnum * Schiit Aegir * MIT S3 * Polk SRS 1.2tl (mods) * Dectet * Bottlehead Crack - Senn 600
    Town Porch: WiiM Pro Plus * Sunfire Sig II * Canare 4S11 * Magnepan 1.6 * Dectet
  • nooshinjohn
    nooshinjohn Posts: 25,468
    edited July 2012
    Get those mods done on the big girls and I am willing to bet the 707's will be looking for a new home. And trust me when I tell you a tear will not be shed when you sit in that SDA sweet spot.
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    It was a pleasure meeting you and your son. I was really glad that the 1.2's made the trip safe and sound. Thanks again. Now if I could only find a good home for some highly modified SDA2 tl's and ADS 810's.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • maxchau
    maxchau Posts: 138
    edited July 2012
    impressive stuff!
    Abbas Tube USB-SPDIF Converter with tube clocksAbbas V2 SE Tube DACAltmann Attraction DACNon-Pre passive preampYamaha M2 AmplifierDIY TPA3255 Mono Amps6L6 Williamson amplifier42 SET amp6V6 SET ampMcIntosh XRT18 speakersApogee Centaur MinorPioneer PAX A30 speakers
  • bluecomet
    bluecomet Posts: 1,118
    edited July 2012
    I would like to keep these SDA2 tl'd speakers in the club. The speaker were tl'd by Ben. They have Larry's rings installed on them and you can see better pictures of what was done if you search Hamatym and look up SDA2 tl'd speakers. He has detailed pictures of the crossovers and the sonic caps and upgrades that were installed. I would never think of selling them if I didn't pick up my SRT sytem. $550.00 is a steal for what was put into them. They are plug and play. All of the hard work has been done to them.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • bluecomet
    bluecomet Posts: 1,118
    edited December 2012
    I am reviving this thread. The SDA 2 tl's are still for sale. They are in excellent condition. They have been completely modified and are plug and play. Save yourself time and money if you were thinking of going the tl route with these speakers. There are no cracks in the wood. These are one of the nicest SDA 2 speakers you will find. The price is $475.00 The ADS 810's are $300.00 They are 4 ohms, solid wood and have no issues except a very light small stain on the bottom corner of the grille. You can barely notice it. The grilles are not metal like newer versions of the 810. The SRS 1.2's have been sold. I live 10 miles north of Scranton. These are for local pickup and cash only deal. Thanks.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • pglbook
    pglbook Posts: 2,228
    edited December 2012
    I want the SDA 2s and sent you a pm over an hour ago! Thanks.
  • bluecomet
    bluecomet Posts: 1,118
    edited December 2012
    PM replied.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
  • pglbook
    pglbook Posts: 2,228
    edited December 2012
    Thanks bluecomet. I got your messages and will call tomorrow (currently snowbound here).
    I am excited to be getting these great speakers!
    Thanks again!