What pre you using?

2

Comments

  • Denon Frank
    Denon Frank Posts: 130
    edited June 2012
    All I can offer you is this review http://www.avsforum.com/t/1136817/parasound-model-2100-preamp-owners-thread/540#post_21805318 It's my first pre :biggrin:
    Frank

    Polk LSiM 703 mains on Skylan Stands
    Polk LSiM 704c center
    Polk FX500i surrounds
    Parasound 5250 Amp
    Oppo BDP-105 :smile:
    SVS PC Ultra tuned to 16hz
    Panasonic 65" Viera Plasma
  • Systems
    Systems Posts: 14,873
    edited June 2012
    codyc1ark wrote: »
    Yeah, but I can only comment if there using one of those green ogerish power cords! :cool:

    Hell, if they aren't, they are missing out!:cheesygrin:
    Testing
    Testing
    Testing
  • Dennis Gardner
    Dennis Gardner Posts: 4,861
    edited June 2012
    I use an Audio Mirror PP1. Nice solid 7 tube phono/line preamp with 6Z4-12B4A-12AU7 in the power supply. 12AU7 for the MC input, 12AT7 for MM input and 12AX7s in the output stage. Alot of preamp for the $ and very flexible with tube changes in each stage making for a wide variety of tonal differences. No need to change out my preamp since getting this unit. I just roll a different configuration into place.

    1163286891.jpg
    HT Optoma HD25 LV on 80" DIY Screen, Anthem MRX 300 Receiver, Pioneer Elite BDP 51FD Polk CS350LS, Polk SDA1C, Polk FX300, Polk RT55, Dual EBS Adire Shiva 320watt tuned to 17hz, ICs-DIY Twisted Prs, Speaker-Raymond Cable

    2 Channel Thorens TD 318 Grado ZF1, SACD/CD Marantz 8260, Soundstream/Krell DAC1, Audio Mirror PP1, Odyssey Stratos, ADS L-1290, ICs-DIY Twisted , Speaker-Raymond Cable
  • Dawgfish
    Dawgfish Posts: 2,554
    edited June 2012
    codyc1ark wrote: »
    Yeah, but I can only comment if there using one of those green ogerish power cords! :cool:

    Hey I'm using one of them green ogerish power cords and I'm quite fond of it! It compliments my ogerish sencebilitites.
  • Systems
    Systems Posts: 14,873
    edited June 2012
    I use an Audio Mirror PP1. Nice solid 7 tube phono/line preamp with 6Z4-12B4A-12AU7 in the power supply. 12AU7 for the MC input, 12AT7 for MM input and 12AX7s in the output stage. Alot of preamp for the $ and very flexible with tube changes in each stage making for a wide variety of tonal differences. No need to change out my preamp since getting this unit. I just roll a different configuration into place.

    1163286891.jpg

    :eek::eek::razz::cheesygrin::razz::cheesygrin:

    Safe queen!
    Never see the light of a flash!
    Prolly nobody ever set eyes on that, at least on the net!

    Thats what happens to me.
    I got some pretty good stuff, but no one ever gets to see it!

    Sweet Dude, very, very sweeeeeeeet Dennis!!:cool:
    Testing
    Testing
    Testing
  • SCompRacer
    SCompRacer Posts: 8,494
    edited June 2012
    pepster wrote: »

    THAT SIR, IS THE SHINNIZLE!!!!
    That is killer!:cheesygrin:

    Why, oh why do I find myself saying "that is the shinnizle" about your equipment all the time Carl?
    !

    Thanks! But you have me confused with my friend Carl, the other half of the two guys in the white van selling speakers at the last Polk Fest.:cheesygrin: I'm Rich (in name). Carl does have some fab gear though! His latest pre is a Rogue Super Magnum with 6SN7 tubes.

    The ModWright tube rectified PS is pretty robust. I use a Holland Black Base 5AR4 Kuhl-Tube in my rectifier. They have metal base innards and were less costly than paying the extreme $Ka-Ching$ metal base price. One thing about the ModWright 5687 pre's is they are hard on output tubes. Like ~5K hours of life.
    Salk SoundScape 8's * Audio Research Reference 3 * Bottlehead Eros Phono * Park's Audio Budgie SUT * Krell KSA-250 * Harmonic Technology Pro 9+ * Signature Series Sonore Music Server w/Deux PS * Roon * Gustard R26 DAC / Singxer SU-6 DDC * Heavy Plinth Lenco L75 Idler Drive * AA MG-1 Linear Air Bearing Arm * AT33PTG/II & Denon 103R * Richard Gray 600S * NHT B-12d subs * GIK Acoustic Treatments * Sennheiser HD650 *
  • Systems
    Systems Posts: 14,873
    edited June 2012
    SCompRacer wrote: »
    Thanks! But you have me confused with my friend Carl, the other half of the two guys in the white van selling speakers at the last Polk Fest.:cheesygrin: I'm Rich (in name). Carl does have some fab gear though! His latest pre is a Rogue Super Magnum with 6SN7 tubes.

    Edit!:eek:
    Testing
    Testing
    Testing
  • Systems
    Systems Posts: 14,873
    edited June 2012
  • Systems
    Systems Posts: 14,873
    edited June 2012
    Dude.
    Freakin awesome!
    Nuf said, thas SOB is SweeeeT!!!!!!!!!!!!!!!!!!!!!!!!


    attachment.php?attachmentid=71962&d=1340329014
    Testing
    Testing
    Testing
  • BlueFox
    BlueFox Posts: 15,251
    edited June 2012
    So far, out of 41 posts, pepster is in the lead with 22 posts. :smile:
    Lumin X1 file player, Westminster Labs interconnect cable
    Sony XA-5400ES SACD; Pass XP-22 pre; X600.5 amps
    Magico S5 MKII Mcast Rose speakers; SPOD spikes

    Shunyata Triton v3/Typhon QR on source, Denali 2000 (2) on amps
    Shunyata Sigma XLR analog ICs, Sigma speaker cables
    Shunyata Sigma HC (2), Sigma Analog, Sigma Digital, Z Anaconda (3) power cables

    Mapleshade Samson V.3 four shelf solid maple rack, Micropoint brass footers
    Three 20 amp circuits.
  • Systems
    Systems Posts: 14,873
    edited June 2012
    BlueFox wrote: »
    So far, out of 41 posts, pepster is in the lead with 22 posts. :smile:

    Bwahaha!:cool:
    I plan on keeping that way, unless you come up with something better?:redface:

    :eek:

    Lets see it BlueFox, talk is sooooooooooooooooooooooo cheap!
    Testing
    Testing
    Testing
  • Systems
    Systems Posts: 14,873
    edited June 2012
    BlueFox wrote: »
    So far, out of 41 posts, pepster is in the lead with 22 posts. :smile:

    Ya got a killer pre BlueFox?,
    Lets see it!
    Talk gets cheaper everyday!:evil:
    Otherwise I would leave it to the "Big Boys" and not even post in this thread!
    Testing
    Testing
    Testing
  • headrott
    headrott Posts: 5,496
    edited June 2012
    pepster wrote: »
    Bwahaha!:cool:
    I plan on keeping that way, unless you come up with something better?:redface:

    :eek:

    Lets see it BlueFox, talk is sooooooooooooooooooooooo cheap!
    pepster wrote: »
    Ya got a killer pre BlueFox?,
    Lets see it!
    Talk gets cheaper everyday!:evil:
    Otherwise I would leave it to the "Big Boys" and not even post in this thread!


    :cheesygrin:
    Relayer-Big-O-Poster.jpg
    Taken from a recent Audioholics reply regarding "Club Polk" and Polk speakers:
    "I'm yet to hear a Polk speaker that merits more than a sentence and 60 seconds discussion." :\
    My response is: If you need 60 seconds to respond in one sentence, you probably should't be evaluating Polk speakers.....


    "Green leaves reveal the heart spoken Khatru"- Jon Anderson

    "Have A Little Faith! And Everything You'll Face, Will Jump From Out Right On Into Place! Yeah! Take A Little Time! And Everything You'll Find, Will Move From Gloom Right On Into Shine!"- Arthur Lee
  • tonyb
    tonyb Posts: 32,957
    edited June 2012
    Paul, they do make decaf buddy.

    Lots of nice pre's so far. I know someone has some VTL's and where is that Joule.....which in my opinion for the money, would be a keeper for along time.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • skipf
    skipf Posts: 694
    edited June 2012
    Carver C-19 for me.
  • DollarDave
    DollarDave Posts: 2,575
    edited June 2012
    Prety modest stuff here, I use a B&K PT-5 regularily in my office system.

    Once in a while, I plop in one of my two surplus NAD 1600's.

    Very different sounds, with an edge to the B&K for "cleanliness".
  • steveinaz
    steveinaz Posts: 19,538
    edited June 2012
    Placette passive, about as simple as it gets. Since all my sources are digital, my Benchmark DAC does the role of integration/switching.
    Source: Bluesound Node 2i - Preamp/DAC: Benchmark DAC2 DX - Amp: Parasound Halo A21 - Speakers: MartinLogan Motion 60XTi - Shop Rig: Yamaha A-S501 Integrated - Shop Spkrs: Elac Debut 2.0 B5.2
  • pitdogg2
    pitdogg2 Posts: 25,419
    edited June 2012
    pepster wrote: »
    ^^^^They "surrendered it to me":cheesygrin:


    their good at that:biggrin:


    I use a Carver C16 only because i could never afford the C19tubed pre....
  • pitdogg2
    pitdogg2 Posts: 25,419
    edited June 2012
    BlueFox wrote: »
    So far, out of 41 posts, pepster is in the lead with 22 posts. :smile:


    post ****:mrgreen:
  • pitdogg2
    pitdogg2 Posts: 25,419
    edited June 2012
    skipf wrote: »
    Carver C-19 for me.


    one of these days I'll have one to compare to my C16, but holey moley they seem to sell for more now than they did new...They must be THAT GOOD:lol:
  • sda2mike
    sda2mike Posts: 3,131
    edited June 2012
  • mhardy6647
    mhardy6647 Posts: 33,770
    edited June 2012
    completely passive DIY* autoformer volume control sourced from Dave Slagle and an input source selector.
    It's the little silver-colored aluminum box fetchingly festooned with two chi-chi black plastic knobs in the photo below.
    mrhrack061111.jpg

    * DIYd by AKer Redboy, not me (credit where credit is due).
  • 72RR
    72RR Posts: 159
    edited June 2012
    B&K Ref50
    Getting ready to plug in a Sunfire TGP5 within a couple of weeks
  • txcoastal1
    txcoastal1 Posts: 13,274
    edited June 2012
    Melody 101PB
    IMG_2358.jpg
    IMG_2360.jpg
    2-channel: Modwright KWI-200 Integrated, Dynaudio C1-II Signatures
    Desktop rig: LSi7, Polk 110sub, Dayens Ampino amp, W4S DAC/pre, Sonos, JRiver
    Gear on standby: Melody 101 tube pre, Unison Research Simply Italy Integrated
    Gone to new homes: (Matt Polk's)Threshold Stasis SA12e monoblocks, Pass XA30.5 amp, Usher MD2 speakers, Dynaudio C4 platinum speakers, Modwright LS100 (voltz), Simaudio 780D DAC

    erat interfectorem cesar et **** dictatorem dicere a
  • sda2mike
    sda2mike Posts: 3,131
    edited June 2012
    tn.jpg


    wew! there it is....extremely transparent.. i've run my SQB direct and it sounds mountains better with this sweetie..i removed the tube ring thingies...ive been running some rca's for over 2 years now... i love them, i see no reason to roll right now
  • PreCd
    PreCd Posts: 786
    edited June 2012
    Right now I am running a Adcom GFP-565. Not a bad preamp but I am ready to move to tubes and will do that in the near future. I am looking at a Dared SL-2000A or a Bottlehead Foreplay III. I am still 6 months or so away from doing anything but I have it on my mind quite a bit.
    SDA2BTL
    Marantz CD5004
    Adcom GFA-545
    Bottlehead Quickie Tube Preamp
  • nooshinjohn
    nooshinjohn Posts: 25,396
    edited June 2012
    I really like the Nonya.:razz:
    The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD

    “When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson
  • Jstas
    Jstas Posts: 14,809
    edited June 2012
    All I have are an Onkyo P-301 which is a pretty spiffy pre-amp for what you're gonna pay for it.

    The other one I have is just an Adcom GFP-750. Again, probably nothing to write home about but it is quite nice and mine is apparently a coveted "blue board" version.

    Got them both used. The oinker from some lady selling off the spoils of her divorce and the Adcom from someone here but it was a couple years ago now and I can't remember who.
    Expert Moron Extraordinaire

    You're just jealous 'cause the voices don't talk to you!
  • cnh
    cnh Posts: 13,284
    edited June 2012
    OK, OK, Bringing up the "lower end" of things but still pretty darned good.

    See the Nakamichi CA-5 and a slightly higher model of Jstas's Onkyo, the P-304 (a great performance to value piece because you can find them at such a low cost)

    My Nakamichi CA-5 was NOS for about $200, and the Onkyo a little over $150 from a fellow Polkie (both for $350 and even my wife couldn't complain that much). If you're looking for some really nice low budget pre-amps, look no further!

    I alternate the Nak with the NAD 214 and an Adcom GFA-545. The Onkyo I use with an Adcom GFA-555 when I need MORE power--which is NOT that often.

    See stock pics below. Nak CA-5 exterior is borrowed from a fellow Polkie's post on this site! I do NOT own the matching Onk amp with the lovely meters in the photo:

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
  • Mr. Sharpe
    Mr. Sharpe Posts: 1,354
    edited June 2012
    cnh wrote: »
    People are all over the place with their pres here. From the low end to the "ridiculous", from two channel to HT, etc. As for me I'd have trouble spending more than 350 for a two channel pre-amp (used) because my wife would evict me.

    Probably too rich for my blood if that pre-amp, above, is "new"! lol

    cnh

    He's right, I use an Onkyo TX-8555 for music right now that sounds nice but will eventually get some kind of Adcom for power, I also have an Adcom GFP-1A that just sits there lol
    Home theater:
    43” Westinghouse Displayer
    Marantz UD-7007 Player
    Emotiva MC-700 Processor
    Adcom GFA-5006 Amplifier
    Parasound Zamp Amplifier
    Ethereal ESO-1 Power Conditioner
    Klipsch RC-10 Center
    Klipsch R34c Fronts
    Klipsch RB-41 Surrounds
    Polk audio PSW-505

    Stereo:
    Polk audio RTA-12c’s fully upgraded crossovers
    DIY 12tc braided speaker cables
    Denon DVD-5910ci Spinner
    Parasound P6 Preamplifer
    Parasound HCA -1500a Amplifier