What's a Good Asking Price for my LS90s?
Lego1
Posts: 62
I'm selling my black LS90 speakers with the CS350LS center. Here's a link with some photos:
http://s22.photobucket.com/albums/b331/nelly11299/
What do you guys think is a good asking price for them?
The left speaker pretty much has no scratches of any kind. The right speaker has a few scratches on the right side and top, but they are only visible in direct light. The left speaker has a few small stains in the fabric of the grill. All but 2 of the grill mounting tabs are intact for the right and left speaker. The center has all the mounting tabs and no scratches of any kind.
I have replaced the tweeters with brand new Polk SL6001 since the originals were old. They originals work and I'm including them as spares. The crossovers were modded with Dayton Audio Capacitors, Mills resistors, and one of the inductors was replaced with a Jantzen Air Core.
The speakers were run with an Adcom 535 for a month, then an Adcom 555 for the rest of the time I had them.
The speakers are perfect function wise, but the small scratches on the right speaker is what I'm concerned about.
The reason I'm selling these is my wife thinks that they are too big for the living room. I listened to some B&W 685s at a friends house and really liked them. My wife prefers the look of the B&W to the LS90.
Thanks!
http://s22.photobucket.com/albums/b331/nelly11299/
What do you guys think is a good asking price for them?
The left speaker pretty much has no scratches of any kind. The right speaker has a few scratches on the right side and top, but they are only visible in direct light. The left speaker has a few small stains in the fabric of the grill. All but 2 of the grill mounting tabs are intact for the right and left speaker. The center has all the mounting tabs and no scratches of any kind.
I have replaced the tweeters with brand new Polk SL6001 since the originals were old. They originals work and I'm including them as spares. The crossovers were modded with Dayton Audio Capacitors, Mills resistors, and one of the inductors was replaced with a Jantzen Air Core.
The speakers were run with an Adcom 535 for a month, then an Adcom 555 for the rest of the time I had them.
The speakers are perfect function wise, but the small scratches on the right speaker is what I'm concerned about.
The reason I'm selling these is my wife thinks that they are too big for the living room. I listened to some B&W 685s at a friends house and really liked them. My wife prefers the look of the B&W to the LS90.
Thanks!
Post edited by Lego1 on
Comments
-
Be careful of the rules. This appears to be a workaround.Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es
Game Room 5.1.4: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra
Bedroom 2.1 Harmon Kardon HK3490; Bluesounds Node N130; Polk RT25i; ACI Titan Subwoofer -
Not at all. I am not trying to nor do I plan on selling them here at all. Only local in my area. I really don't know how much they are worth. If this violates the rules in some way, let me know which rule it violates because I read them and didn't not see this as a violation of the rules. I'm sorry, but I have seen plenty of people posting asking how much their stuff is worth and how much they can get for them.
-
Silly Lego1...
It's not about how a speaker looks, rather it is about how they SOUND.:cheesygrin:
B&W sounds just ok to me, and I have heard them being pushed by some serious tube power. I would think the Polks can hold their own and thensome. Personally I would keep what you've got, and DON"T give in.The Gear... Carver "Statement" Mono-blocks, Mcintosh C2300 Arcam AVR20, Oppo UDP-203 4K Blu-ray player, Sony XBR70x850B 4k, Polk Audio Legend L800 with height modules, L400 Center Channel Polk audio AB800 "in-wall" surrounds. Marantz MM7025 stereo amp. Simaudio Moon 680d DSD
“When once a Republic is corrupted, there is no possibility of remedying any of the growing evils but by removing the corruption and restoring its lost principles; every other correction is either useless or a new evil.”— Thomas Jefferson -
I know. But as some of you married folks know, it's not always just about what I want
-
I saw a pair at a local shop for $400, but I felt that was a bit taxed. Another friend of my just picked up a pair for $300. Hope that helps.
-
Not at all. I am not trying to nor do I plan on selling them here at all. Only local in my area. I really don't know how much they are worth. If this violates the rules in some way, let me know which rule it violates because I read them and didn't not see this as a violation of the rules. I'm sorry, but I have seen plenty of people posting asking how much their stuff is worth and how much they can get for them.
Fair enough. I'll give you the benefit of the doubt, but we regularly have folks on here who ask how much their stuff is worth because they don't have enough posts to sell on the forum and then try to sell it. I don't really know what they are worth, but I would try to sell the center on ebay if you want maximum value for it.
As for replacements, if you really like the sound of the LS90s but need something smaller, why not get a pair of either rt35is or better yet, rt55is? Your center would match both of those as the share essentially the same tweeter, and the overall sound would be very similar, albeit with less bass. But with the rt55is, you would still have pretty good bass overall.Living Room 2.2: Usher BE-718 "tiny dancers"; Dual DIY Dayton audio RSS210HF-4 Subs with Dayton SPA-250 amps; Arcam SA30; Musical Fidelity A308; Sony UBP-x1000es
Game Room 5.1.4: Denon AVR-X4200w; Sony UBP-x700; Definitive Technology Power Monitor 900 mains, CLR-3000 center, StudioMonitor 350 surrounds, ProMonitor 800 atmos x4; Sub - Monoprice Monolith 15in THX Ultra
Bedroom 2.1 Harmon Kardon HK3490; Bluesounds Node N130; Polk RT25i; ACI Titan Subwoofer -
Uttoquass reported
-
$500 max for the set. Depends on condition.
-
Thanks guys. I'll look into the ones you posted about rooftop. You're right, i dont have enough posts to sell, but there's no way I'll sell these on a forum or even audiogon since you guys know these are huge and weigh a ton.
-
I know. But as some of you married folks know, it's not always just about what I want
I feel your pain. I have been able to hang on to my RTA11TL's but barely. When I brought home some Vienna Acoustics Hayden Grands to possibly replace them, my wife went into sticker shock and I returned them. She rarely brings up subject anymore. Now that I agreed to let her get her little yorkie puppy I figure I have more bargaining power to keep the RTA's. I just hope the pup doesn't decide to use them as chew toys. :eek:
StanStan
Main 2ch:
Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.
HT:
Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60
Other stuff:
Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601 -
I own a pair of LS 90's I would never sell. I purchased new in February of 1993. However, if I had to.......I would want $350 firm and local pickup. Oh, you could divorce her.....that is what I did. Stone of ToneSony Tport>Illuminati D-60>Audio Alchemy DTI-Pro>Prophecy Cryo-Silver Reference i2s>Audio Alchemy DDE 3.0 w/remote wand>Kimber Select 1030>Decware Zen Select Amp (SE84CS)>Kimber Select 3033> SDA 1/in Stereo only
Sony Tport>IllumD-60>AA DTI Pro 32>AudMagicMysticRef i2s>AA DDE 3.0> Kimber Hero Int>Rotel RA-1062>Kimber Timbre>EmotivaXPA2>Kimber 8TC Speaker Cable>SDA SRS 1.2/use SDA always>Kimber 9033 to/hi Pass jumpers> Kimber PK10 Palladian Power Cord to Rotel