Planning some upgrades for my system!

Serendipity
Serendipity Posts: 6,975
edited January 2012 in Electronics
As some of you may have read, I am planning to upgrade my system to get better sound quality. For the audio side of things, I am thinking of the following:
polkaudio RT35 Bookshelves
polkaudio 255c-RT Inwalls
polkaudio DSWPro550WI
polkaudio XRT12 XM Tuner
polkaudio RM6750 5.1

Front projection, 2 channel, car audio... life is good!
Post edited by Serendipity on

Comments

  • Serendipity
    Serendipity Posts: 6,975
    edited January 2012
    And on the video side, here's a rough plan of how things will be connected:

    (Diagram courtesy of CurtPalme.com)
    polkaudio RT35 Bookshelves
    polkaudio 255c-RT Inwalls
    polkaudio DSWPro550WI
    polkaudio XRT12 XM Tuner
    polkaudio RM6750 5.1

    Front projection, 2 channel, car audio... life is good!
  • SDA1C
    SDA1C Posts: 2,072
    edited January 2012
    If I might ask...why did you go from the sat rec to the AVReceiver instead of the scaler? I would think the scaler would be the better option and the VHS to the receiver via svid would lend "as good as it gets" so to speak for the VHS signal.
    Too much **** to list....
  • Serendipity
    Serendipity Posts: 6,975
    edited January 2012
    SDA1C wrote: »
    If I might ask...why did you go from the sat rec to the AVReceiver instead of the scaler? I would think the scaler would be the better option and the VHS to the receiver via svid would lend "as good as it gets" so to speak for the VHS signal.

    Good catch. I didn't actually hook up anything yet. Just planning to see what would provide the best quality. And still have to find a Parasound A21, A51, C1, etc.

    Everything is un-hooked as of now:
    polkaudio RT35 Bookshelves
    polkaudio 255c-RT Inwalls
    polkaudio DSWPro550WI
    polkaudio XRT12 XM Tuner
    polkaudio RM6750 5.1

    Front projection, 2 channel, car audio... life is good!