psw10 help PLEASE

grb3963

Hi, I have a psw10 sub hooked to a sony str-dh510 avr. my reciever only has an lpf filter with a preset of 120hz which is unchangeable but can be turned on or off. since the psw10 does not have a lfe input should i max out setting on sub and turn off lpf filter on avr or turn off lpf filter and set xover on sub to about 80hz? it is hooked up via rca w/y splitter. my other speakers are polks at5s in front csw1 front and monitor 50s rear..

thanks grb3963

[Deleted User]

Hello GRB,
I'm thinking you probably meant the Monitor 50s are your main speakers and the Atrium 5 as the surround speakers, correct? If so, it might be best to turn off the 120Hz low pass filter, in the Sony, and use the variable low pass filter, on the PSW110, to get a smooth blend with the 50s.
Regards, Ken

grb3963

sorry, RTIA5 FRONT AND CS10 CENTER AND MONITOR 50 REAR

[Deleted User]

Ah, in that case the 80Hz filter point seems correct, let the PSW110 do the filtering.
Cheers, Ken

grb3963

Does it matter that i have a psw10 sub, not a psw110?? If not, thankyou 4 your help..

[Deleted User]

Hello,
No, the operation and connections will be the same.
Cheers, Ken

grb3963

Thankyou very much.. HAPPY NEW YEAR!!!!!

[Deleted User]

You also, enjoy your Polks!