RT25 assortment and Revel stands

Options
Posts: 444
edited January 2012 in For Sale (FS) Classifieds
Prices don't include shipping. Will post pictures later if any interest.

Polk RT25i (pair) In good condition, 8/10. A few very small marks that are not noticeable, maybe a few more on bottom. Grills and drivers very good. $60

RT25i (one only) In okay but presentable condition. 6/10. A few marks that could be sharpied up, not dings, just minor places where finish might have flecked off. Bottom has marking where the rubber feet were pulled off. I have two grills, one normal one and one that has the emblem turned sideways to make the RT25i look good as a center channel. First grill is in good shape, second one has a reglued peg (which seems to be holding fine) and one small hole in corner (over plastic doesn?t hardly show.) $25

RT25 (pair) In okay but very presentable condition. 6/10 Generally good shape, the back corner of one has a small ding that lifted the laminate a bit. $50

Revel Pedestal 22 stands (pair). There are a few marks on these, but none that break the powder coat finish and none that can be seen from over 2 feet away. Very nice and heavy stands. Specifically built for the M12 or M22, but would work with any larger bookshelf speakers. Very solid feel and includes cord management down the front center tube. $100
Post edited by jawhog on
· Share on FacebookShare on Twitter

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Comments

  • Posts: 25,313
    edited December 2011
    jawhog wrote: »
    Prices don't include shipping. Will post pictures later if any interest.



    RT25 Pair in okay but very presentable condition. 6/10 Generally good shape, the back corner of one has a small ding that lifted the laminate a bit. $50

    Are these RT25i? or RTi 25 or just plain RT25? Pics and color please. If they are "i" I am interested. If not, I am interested in the $60 RT25i.

    Let me know.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    All are black, there are no typos in original post, there are a total of three 25i's and two RT25s. I should also say that if one pair sells, I will probably keep the other one.

    Will post pics tonight.
    · Share on FacebookShare on Twitter
  • Posts: 25,313
    edited December 2011
    Consider me seriously interested in the RT25i pair. Pending photo's and let me get home and do some measuring.

    Also if you get a chance a shipping quote to 61114

    Thanks

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    IMG_0080.jpg
    IMG_0081.JPG
    IMG_0082.JPG
    IMG_0083.JPG

    two pics of the pair of rt25is and two of the single rt25i

    Heiney, shipping for the pair would be $21
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    IMG_0087.JPG
    IMG_0088.jpg


    Revel Pedestal 22 stands
    · Share on FacebookShare on Twitter
  • Posts: 2,871
    edited December 2011
    If H9 doesn't want the RT25i's, I'll take them.
    · Share on FacebookShare on Twitter
  • Posts: 661
    edited December 2011
    What are the dimensions of the stands, height and top plate?
    2.1: PC>Schiit Gungnir MB>Schiit Freya Noval>NAD C-270>Ascend Acoustics Sierra-1, HSU STF-2 5.1: HDMI Bitstream>Denon AVR-1910>polkaudio RTE55, CS350-LS, RT3, HSU STF-2, Visio M55-F0
    · Share on FacebookShare on Twitter
  • Posts: 25,313
    edited December 2011
    I'll take the RT25i's, but I'll PM you about possibly meeting somewhere since we might be within 100 miles of each other. I'd hate for them to get damaged in shipping, but if we can't work out a meet then I'll pay the shipping.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    H9, your box is full.

    I'm in Elmhurst (60126). I honestly don't have time to go driving around but you're free to come here if you prefer. Probably cost more about the same in gas as shipping, but I think you were more worrried about getting them safe. I've got a good box and tons of bubble wrap. They're not that big or heavy. I'm confident they'll arrive safely, and at a minimum they'll be packed well enough (i'll document with photos) that we'll be able to collect insurance. And of course I'll stand behind getting them safely to you.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    stands are 65cm tall (I'll let you convert) The top plate is pretty big and trapezoidal. about 8 inches in the front (the big side) and 11 inches deep. I'll get exact dimensions tonight.
    · Share on FacebookShare on Twitter
  • Posts: 25,313
    edited December 2011
    jawhog wrote: »
    H9, your box is full.

    I'm in Elmhurst (60126). I honestly don't have time to go driving around but you're free to come here if you prefer. Probably cost more about the same in gas as shipping, but I think you were more worrried about getting them safe. I've got a good box and tons of bubble wrap. They're not that big or heavy. I'm confident they'll arrive safely, and at a minimum they'll be packed well enough (i'll document with photos) that we'll be able to collect insurance. And of course I'll stand behind getting them safely to you.

    That's probably best as I really don't have time either to make a trip. I just wanted to ensure they shipped safely. I'll be in touch.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    Ok H9, just pm me where to send them.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    stands are 25 inches tall without spikes, higher depending on how you set the spikes. Top plate is 10.25 inches deep. Front width of plate is 8.25 inches, back width is 6.75 inches.
    · Share on FacebookShare on Twitter
  • Posts: 25,576
    edited December 2011
    Wasn't there a thread where a Polkie was looking for a pair of stands with a large top plate??? Anyone remember? I wonder if he's seen your ad Jawhog.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    rt25i's packed and ready to go. PM sent to heiney9.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    Stands are $110 shipped to anwhere east of rockies. $120 for west coast.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    Stands sold.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited December 2011
    Heiney9, here are two more photos I took when packing the speakers. I found two spots that are more than just "finish flecking off". See your PM about this. If you change your mind, that's fine. I somehow never noticed these until I actually set the speakers on their side.
    IMG_0001.JPG
    IMG_0002.JPG
    · Share on FacebookShare on Twitter
  • Posts: 255
    edited January 2012
    How much for all 3 RT25is shipped to 65807? I can PP you ASAP. Thanks! Greg
    AVR: Yamaha RX-V661
    DVD: Yamaha DV-C6480
    BR: Samsung 1600
    Mains: Polk RT55 (bi-amped)
    Center: CS300
    Sides: FX1000
    Rears: RT/FX
    Subs: SVS 20-39 PC+ 12.3 & DIY SVS 12.2
    Projector: Optoma HD70 w/ 106" Elite Screen
    Power: Panamax MAX 5100
    Remote: Harmony One
    · Share on FacebookShare on Twitter
  • Posts: 25,313
    edited January 2012
    The RT25i pair is sold.............to me.

    I wanted to thank Jawhog for a great transaction! He shipped very quickly and packed them very well. The speakers sound great!! Thanks again for a smooth, painless transaction.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Puritan Audio PSM136 Pwr Condtioner & Classic PC's | Legend L600 | Roon Nucleus 1 w/LPS - Tubes add soul!
    · Share on FacebookShare on Twitter
  • Posts: 255
    edited January 2012
    Thanks for the heads up! What about the RT25 pair and the single 25i? Interested in a package deal?
    AVR: Yamaha RX-V661
    DVD: Yamaha DV-C6480
    BR: Samsung 1600
    Mains: Polk RT55 (bi-amped)
    Center: CS300
    Sides: FX1000
    Rears: RT/FX
    Subs: SVS 20-39 PC+ 12.3 & DIY SVS 12.2
    Projector: Optoma HD70 w/ 106" Elite Screen
    Power: Panamax MAX 5100
    Remote: Harmony One
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited January 2012
    see post 3. I was going to keep the pair that didn't sell. However, I have since inherited another pair of speakers from my sister when she was moving. I don't have a box at the moment, but if I can track a good one down without having to pay for it, I could get these to you for $80 shipped, or else I'd have to add another $10. Looks like you'll be running them as surrounds, but I'm using them with the cs300 and they're great.
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited January 2012
    ps - I sent the single to ebay awhile ago, so the only thing left here are the RT25s.
    · Share on FacebookShare on Twitter
  • Posts: 255
    edited January 2012
    That changes things a little. I was looking to put together a little budget 2nd system and this was going to be my front sound stage. Let me see if I can find a reasonable matching center and get back to you. Thanks- Greg
    AVR: Yamaha RX-V661
    DVD: Yamaha DV-C6480
    BR: Samsung 1600
    Mains: Polk RT55 (bi-amped)
    Center: CS300
    Sides: FX1000
    Rears: RT/FX
    Subs: SVS 20-39 PC+ 12.3 & DIY SVS 12.2
    Projector: Optoma HD70 w/ 106" Elite Screen
    Power: Panamax MAX 5100
    Remote: Harmony One
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited January 2012
    Let's discuss, see your pm.
    · Share on FacebookShare on Twitter
  • Posts: 2,401
    edited January 2012
    jawhog....are the 25's still out there? If so please PM me with price and shipping to AZ.
    Sean
    XboxLive--->avelanchefan
    PSN---->Floppa
    http://card.mygamercard.net/avelanchefan.png
    · Share on FacebookShare on Twitter
  • Posts: 255
    edited January 2012
    Go ahead jawhog, I'm in a holding pattern. Thanks- Greg
    AVR: Yamaha RX-V661
    DVD: Yamaha DV-C6480
    BR: Samsung 1600
    Mains: Polk RT55 (bi-amped)
    Center: CS300
    Sides: FX1000
    Rears: RT/FX
    Subs: SVS 20-39 PC+ 12.3 & DIY SVS 12.2
    Projector: Optoma HD70 w/ 106" Elite Screen
    Power: Panamax MAX 5100
    Remote: Harmony One
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited January 2012
    Thanks gacole. Shipping is steep to AZ from IL, going to total out at $95. Probably not worth it for these little guys. For anyone interested, I have a CS300 that I could make for sale also, say $50. Creates a nice match with the 25s. So for $100 plus shipping, it's a real nice front 3 for a small system. Will take pics should there be any interest.
    · Share on FacebookShare on Twitter
  • Posts: 255
    edited January 2012
    WTH....I 'll take them. No hurry on getting them, find a good box and ship as cheap as possible. I love the 25s! PM me your PayPal info.

    Thanks- Greg
    AVR: Yamaha RX-V661
    DVD: Yamaha DV-C6480
    BR: Samsung 1600
    Mains: Polk RT55 (bi-amped)
    Center: CS300
    Sides: FX1000
    Rears: RT/FX
    Subs: SVS 20-39 PC+ 12.3 & DIY SVS 12.2
    Projector: Optoma HD70 w/ 106" Elite Screen
    Power: Panamax MAX 5100
    Remote: Harmony One
    · Share on FacebookShare on Twitter
  • Posts: 444
    edited January 2012
    All sold.
    · Share on FacebookShare on Twitter

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Welcome!

It looks like you're new here. Sign in or register to get started.
Sign In
Register

Quick Links