Polk SDA-SRS for sale local pickup in Northern Virginia $1100
Emlyn
Posts: 4,536
I've moved recently and have decided to pare down the gear I have and then try something new. I'm the second owner of these and have enjoyed them for the last several years. Serial numbers are 3292 and 4083. Come complete with new replacement RDO tweeters and SDA blade-blade cable. I also have a complete set of Larry's driver mounting rings and new crossover face plates that I haven't got around to installing. Will also include an unused set of compatible speaker spikes from Meniscus Audio.
The speakers are very clean with no rips in the fabric or scratches, dings, or cracks in the wood and have always been run with good amplification by me and the previous owner. On the Audiogon scale I'd rate them an 8 out of 10 cosmetically since they are around 25 years old. As is common with original SDA-SRS speakers, the original anodized crossover faceplate faded over time on one of the speakers but not the other. If you choose to, you can take the speakers to a higher level by updating the crossover components with higher quality than originally used, and doing some other tweaks. I've been happy with them in their original state, apart from replacing the driver mounting screws with brass ones shortly after I got the speakers.
Asking price is $1100, local pickup only at my place in Springfield, VA. Payment by cash or Paypal. These will not be shipped anywhere. I can help you load them up for safe travel if you have a full size SUV, van, or truck. As you probably know, each speaker weighs around 185 lbs. They'll go to Ebay next weekend if they haven't sold here.
If you are interested, please post here first and send me a private message. Thanks.
The speakers are very clean with no rips in the fabric or scratches, dings, or cracks in the wood and have always been run with good amplification by me and the previous owner. On the Audiogon scale I'd rate them an 8 out of 10 cosmetically since they are around 25 years old. As is common with original SDA-SRS speakers, the original anodized crossover faceplate faded over time on one of the speakers but not the other. If you choose to, you can take the speakers to a higher level by updating the crossover components with higher quality than originally used, and doing some other tweaks. I've been happy with them in their original state, apart from replacing the driver mounting screws with brass ones shortly after I got the speakers.
Asking price is $1100, local pickup only at my place in Springfield, VA. Payment by cash or Paypal. These will not be shipped anywhere. I can help you load them up for safe travel if you have a full size SUV, van, or truck. As you probably know, each speaker weighs around 185 lbs. They'll go to Ebay next weekend if they haven't sold here.
If you are interested, please post here first and send me a private message. Thanks.
Post edited by Emlyn on
Comments
-
Hi, I have recently been looking for a set. I posted in the WTB ads as well. I am near Erie, PA. That is the biggest issue for me as it is
about 350 miles from you. Pittsburgh would be a good meetup place if you head up that way. Could you email me some pics at musky1963@adelphia.net > Thanks, JeffJeff -
I forgot to mention that I have a few sets of Unity Audio speakers. Both the Fountainheads and the Signature Ones. They are the best 2 speakers that they made. They are very rare to see for sale.Jeff
-
Hi Jeff. I'm only selling these on a "come and get 'em" basis.
-
-
I got the cash, just don't have the means to get there and pick them up!! I'd LOVE to have these guys!
-
Took some photos this morning. I did notice a small snag in the fabric near the bottom of the right speaker cover.
With tweeter upgrades, new crossover plates, and Larry's rings for midwoofers, passive radiators, and tweeters ready for you to install, you're already looking at around $500+ better than other SDA-SRS models you may see elsewhere! Note: spot on third photo was dust on my camera lens.
-
Mark, these look great. They will make somebody very happy.
GLWTS!:biggrin:2-Channel: PC > Schiit Eitr > Audio Research DAC-8 > Audio Research LS-26 > Pass Labs X-250.5 > Magnepan 3.7's
Living Room: PC > Marantz AV-7703 > Emotiva XPA-5 > Sonus Faber Liuto Towers, Sonus Faber Liuto Center, Sonus Faber Liuto Bookshelves > Dual SVS PC12-Pluses
Office: Phone/Tablet > AudioEngine B1 > McIntosh D100 > Bryston 4B-ST > Polk Audio LSiM-703's -
They rent pickups and vans for not a whole lot of money. Makes getting a great deal on a nice set of SDAs easy.>
>
>This message has been scanned by the NSA and found to be free of harmful intent.< -
Awww Hell! I was in Mineral last rod change! Damn it if I couldn't have made a better offer! GLWTS
1CToo much **** to list.... -
Awww Hell! I was in Mineral last rod change! Damn it if I couldn't have made a better offer! GLWTS
1C
I'm seriously considering it! I wouldn't know until Tuesday if I can actually get the time away to come get them. Working 12 hr days, 7 days a week. Work at Ford and we totally gutted out plant and are under the gun to get everything finished soon so production can start back. Would have to take a weekend off...the wheels are turning! -
Wrong quote, considering renting a van.
-
Emlyn is a first class Polk member. I've made several transactions. Buy with confidence!
Good luck with the sale! These are great speakers at a fantastic price.Carl -
I concur with Carl, Mark is a good guy to deal with.Political Correctness'.........defined
"A doctrine fostered by a delusional, illogical minority and rabidly promoted by an unscrupulous mainstream media, which holds forth the proposition that it is entirely possible to pick up a t-u-r-d by the clean end."
President of Club Polk -
Mark, would it be possible to pm me with some contact info so we could speak regarding the 1.2's, Unfortunatly, I don't have enough post to pm you.
Thanks DavidMcintosh MC-501 mono blocks
Mcintosh C-45
Mcintosh MVP-871
PS AUDIO AV5000
MIT 3.3 Shotgun biwire speaker interface
MIT 3.3 Shotgun XLR interconnects
Polk 2.3TL's Gimpod boards/F-1 modded crossovers/dynamat/JB weld/Larry's rings/Blackhole 5 strips
Polk 3.1 TL's mint/stock (purchased new)
Polk SDA-2's -
Hi David. The speakers are original SDA-SRS's, not 1.2's or 1.2TL's.
PM sent. -
I am making a trip through northern VA at the end of this month if they are still for sale I'll give them a look.:question:
-
Sorry, the speakers are gone.
-
Those look lovely. Congrats to the new owner.
Two Channel Setup:
Speakers: Wharfedale Opus 2-3
Integrated Amp: Krell S-300i
DAC: Arcam irDac
Source: iMac
Remote Control: iPad Mini
3.2 Home Theater Setup:
Fronts: Klipsch RP-160M
Center: Klipsch RP-160M
Subwoofer: SVS PB12NSD (X 2)
AVR: Yamaha Aventage RX-A2030
Blu Ray: Sony BDP-S790
TV Source: DirecTV Genie