What interconnects for HT and 2 ch would sound good

polkfarmboy
polkfarmboy Posts: 5,703
edited October 2011 in 2 Channel Audio
I wonder if anyone has a suggestion for some rca's I could use for HT but also be used for 2 channel until I get money for a really nice pair .The rca's will be going to the amp from the processor
Post edited by polkfarmboy on

Comments

  • EndersShadow
    EndersShadow Posts: 17,590
    edited October 2011
    Signal Cable Analog 2's. He sells a Home theater pack with 5, 6, 7 or 8 cable configurations. They are cheaper than buying multiple sets of the Analog 2 stereo pairs. They are what I am rocking right now. You also get a Club Polk discount

    Otherwise I have heard good things about the Audioquest line (Sidewinder, Cooperhead) stuff.

    http://signalcable.com/analoght.html

    http://audioquest.com/
    "....not everything that can be counted counts, and not everything that counts can be counted." William Bruce Cameron, Informal Sociology: A Casual Introduction to Sociological Thinking (1963)
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    Really, after all the cable threads asking the exact same question, now the question again???? Really, I mean really?????

    PFB, you've been around here enought to know the answer. Damn, this place it like a broken record sometimes. Stop the insanity!!

    Signal Cable
    Monoprice
    Entry level Audioquest.

    It doesn't matter; and what kind of time line before you get a "really nice" pair.....whatever that means. What is a really nice pair to you? What's your budget?

    This place drives me batty sometimes.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
  • brgman
    brgman Posts: 2,859
    edited October 2011
    Lol.H9 you slay me!
    Main Rig-Realistic AM/FM Record player 8 track boasting 4 WPC

    Backup Rig-2 CH-Rogue Audio Zeus w/Factory Special Dark Mods,Joule-Electra 300ME Platinum Preamp,OPPO-105 w/Modwright Tube Mod, Auralic Aries G2.1,Polk 2.3TL,3.1TL's,Dreadnought,RTA-15TL's,1C's All Fully Modded,2xRTA-12c's ,Benchmark DAC3 HGC,Synology NAS,VPI Scout w/Dynavector DV-20XH and Rogue Audio Ares Phono Preamp,Sony PCM-R500 DAT,HHB-850 Pro CDR,Tascam CC-222SLMKII Cassette/CDR,MIT S3.3 Shotgun Cables,Shunyata Hyra-8,Shunyata and Triode Labs Power Cords

    I’M OFFENDED!!!!
  • tonyb
    tonyb Posts: 32,967
    edited October 2011
    We can't tell you what would sound good in your room,on your gear, with your ears. All we can do is suggest what others here use and have had good results with. The signal cables are good,the analog2's, and might I also suggest if you go on Audiogon.com and bid on a pair of Audio Metallurgy GA 0's, great bang for your buck cable. Think right now they are about 40 bucks and they will give you the option to buy as many as you want at the winning price.
    HT SYSTEM-
    Sony 850c 4k
    Pioneer elite vhx 21
    Sony 4k BRP
    SVS SB-2000
    Polk Sig. 20's
    Polk FX500 surrounds

    Cables-
    Acoustic zen Satori speaker cables
    Acoustic zen Matrix 2 IC's
    Wireworld eclipse 7 ic's
    Audio metallurgy ga-o digital cable

    Kitchen

    Sonos zp90
    Grant Fidelity tube dac
    B&k 1420
    lsi 9's
  • polkfarmboy
    polkfarmboy Posts: 5,703
    edited October 2011
    Thats good to know about the signal cable coming in packs for HT and the CP discount ..... thanks for that reply EndersShadow

    Heiney I already have the monoprice crap and dont care for them .I know alot about speaker cables from reading here buy never really paid much attention to interconnects because I have never needed any till now

    If it helps I am running Martin Logans with mit wire running from an anthem avm pre connected to an emotiva amp

    I was just looking at the cheap ic's on the signal cable site and have a few thoughts .Would the Silver Res Silver Bullet ic be a good choice ? Whats the diff between copper and silver bullets appart from one kills werewolfs and the other does not ?
  • Joe08867
    Joe08867 Posts: 3,919
    edited October 2011
    I switched from Blue Jeans to Kimber for all my cables.

    I have used Kimber on my speakers for a good 15 years and there interconnects for about 3-5 years. They sound awesome.

    I use PBJ for everything but the sub that gets a Cadence, and 8TC for speakers.

    http://www.kimber.com/products/interconnects/analog/
  • mole'
    mole' Posts: 3,160
    edited October 2011
    if your on a budget, get the monoprice ones.

    they were great for me til i went to AQ sidewinders then to King cobras.

    have yet to try Signal Cable, but i think im gonna give them a shot here soon.
    mole'
  • heiney9
    heiney9 Posts: 25,165
    edited October 2011
    Silver cables tend to be bright. If you are running Emo gear, I'd stay far away from anything having any silver content as Emo is bright already.

    H9
    "Appreciation of audio is a completely subjective human experience. Measurements can provide a measure of insight, but are no substitute for human judgment. Why are we looking to reduce a subjective experience to objective criteria anyway? The subtleties of music and audio reproduction are for those who appreciate it. Differentiation by numbers is for those who do not".--Nelson Pass Pass Labs XA25 | EE Avant Pre | EE Mini Max Supreme DAC | MIT Shotgun S1 | Pangea AC14SE MKII | Legend L600 | BlueSound Node 3 - Tubes add soul!
  • amulford
    amulford Posts: 5,020
    edited October 2011
    Second that. I've even found hybrids to have a bright flavor and something lacking in the lower end. YMMV...
  • Hawkeye
    Hawkeye Posts: 1,313
    edited October 2011
    My speakers are in the same family as yours and I'd be very leery of silver cables. I did a short review of silver wires with the ML line herehttp://www.polkaudio.com/forums/showthread.php?77291-Experiment-with-Silver-Cables-from-Signal. You can't beat the deal if you don't care for them and if you like them, your a bit ahead of the mono's from what I've read.

    Gordon
    2 Channel -
    Martin Logan Spire, 2 JL Audio F112 subs
    McIntosh C1000 Controller with Tube pre amp, 2 MC501 amplifiers, MD1K Transport & DAC, MR-88 Tuner
    WireWorld Eclipse 6.0 speaker wire and jumpers, Eclipse 5^2 Squared Balanced IC's. Silver Eclipse PCs (5)
    Symposium Rollerblocks 2+ (16)Black Diamond Racing Mk 3 pits (8)
  • polkfarmboy
    polkfarmboy Posts: 5,703
    edited October 2011
    Thanks for posting that link to your thread Gordon, great read and informative
  • jbooker82
    jbooker82 Posts: 1,627
    edited October 2011
    Audio Advisor builds an exclusive Audio Quest cable. They are called Black Mamba II's. Same cable as the AudioQuest King Cobra, and silver plated RCA 800 termination.

    http://www.audioadvisor.com/prodinfo.asp?number=AQBMII&variation=1

    Or you can get a 3 pack (6 cables) of 1.5 meter for $249.99
    http://www.audioadvisor.com/prodinfo.asp?number=AQKBMII
    AVR: Onkyo Tx-NR808
    Amplifier: Carver A-753x 250 watts x 3
    Fronts: Polk RTI A7 (modded by Trey VR3)
    Center: CSI A4 (modded by Trey VR3)
    Rear: FXI A4
    Sub: Polk DSW Pro 660wi
    TV: LG Infinia 50PX950 3D
    Speaker Cable: AudioQuest Type 8
    IC: AudioQuest Black Mamba II
  • TouchOfEvil
    TouchOfEvil Posts: 967
    edited October 2011
    You could just deal with the cheap ones you got now and get the good ones later. Instead of spending money in babysteps and costing more in the long run.
    Living Room Rig:D
    Rotel RSP-1069/Rotel RMB-1095/Rotel-1072/Polk lsI15's W/modded xoverW/DBsubs/Polk LsiC/lsI7's/Klipsch sub-12"the weak link"/DLP Mitsubishi 65"
    Xbox360/PS3/WII
    M.Br. setup:)
    Emotiva MMC-1/Rotel RMB-1075/Polk BlackStone TL350's/Velodyne SPL1000/Samsung 51" Plasma
    Computer Rig:
    Rotel RB1050/Tannoy DC4's/Klipsch RW-10d/ImodIpod/HK AVR230 for now....
    Headphones-Ultrasone-HFI780's w/LittleDot MK Vamp Portables Panasonic HJE-900's
  • jbooker82
    jbooker82 Posts: 1,627
    edited October 2011
    You could just deal with the cheap ones you got now and get the good ones later. Instead of spending money in babysteps and costing more in the long run.

    Yep that is why I got the Black Mamba II's and Audio Quest Type 8 speaker cables for my 3 channel amp. I dont plan on going any further.
    AVR: Onkyo Tx-NR808
    Amplifier: Carver A-753x 250 watts x 3
    Fronts: Polk RTI A7 (modded by Trey VR3)
    Center: CSI A4 (modded by Trey VR3)
    Rear: FXI A4
    Sub: Polk DSW Pro 660wi
    TV: LG Infinia 50PX950 3D
    Speaker Cable: AudioQuest Type 8
    IC: AudioQuest Black Mamba II