MW6500 for M10 A
Pauly
Posts: 4,519
So my effing dog got freaked out during a storm and went buck in the house. Ended up knocking over one of my speakers and one of the drivers froze up. :mad::mad::mad::mad::mad: Pulled it and its circa 81' MW6500
Let me know if you have a spare. I would like to keep them orig as possible as they are the 2007 Polk Fest 10's that i bought from Ted.
Thanks
Pauly
Let me know if you have a spare. I would like to keep them orig as possible as they are the 2007 Polk Fest 10's that i bought from Ted.
Thanks
Pauly
Life without music would♭
Post edited by Pauly on
Comments
-
Look close at the back of the speaker, mw6600. If it ok for you go for it , I wasnt going to chance it.Polk has the 6503.
-
Oldfatdogs wrote: »Look close at the back of the speaker, mw6600. If it ok for you go for it , I wasnt going to chance it.Polk has the 6503.
good eye I should of zoom'd in. I actually seen the paper and though that it looked like my 6600's but just thought 6500 may of had the same paper.
Sorry -
Hay Pitt, the only reason I knew that was I was going to buy them for my monitor 7s until I found out polk replacement for 6500 was6503.Dan
-
6500s have white labels and sound different then 6600s The 6503 does not sound the same as a 6500 or 6600
-
it's a 6600 Keith the same as i referenced above...Don't understand? -
Need 6500. Not 6503, or 6600.
Thanks
PaulyLife without music would♭ -
Need 6500. Not 6503, or 6600.
Thanks
Pauly
yes we know Pauly. The link I sent said mw6500 10a but I did not look as closely as I should of. Why Keith sent the same link is also confusing to me after he mentioned the labels are different.
Our eyes are on the lookout fer ya
Sorry Ivan -
Thanks.
:biggrin::biggrin::biggrin::biggrin:Life without music would♭ -
Pauly, If I have been reading correctly the 6503 is the replacement for the 6500 from polk.The lady in the parts department told me that's the one they have available.Not an exact match but close.Hope you find what your looking for.Dan
-
Need 6500. Not 6503, or 6600.
Thanks
Pauly
Beggers can't be choosers, Those raggety assed speakers wont know the difference :biggrin: Are you running some high dollar audiofool system that would be compromised by a odd driver? :eek:
Just busting your balls pauly, i got over the allure of the old polks for now :biggrin:MY HT RIG:
Sherwood p-965
Sherwood sd871 dvd
Rotel 1075 amp x5
LSI15 mains
LsiC center
LSIfx surround backs
Lsi7 side surrounds
SVS pb12/plus2
2 Channel Rig:
nad 1020 Pre-amp
Rotel 1080 stereo amp
Polk sda 2B
kenwood grunt Tuner
realistic lab 450 TT
Signal cable IC -
Beggers can't be choosers, Those raggety assed speakers wont know the difference :biggrin: Are you running some high dollar audiofool system that would be compromised by a odd driver? :eek:
Just busting your balls pauly, i got over the allure of the old polks for now :biggrin:
Just want to keep them as original as possible. They are my Computer/2chnl speakers.Life without music would♭ -
-
I take it you did not get my PM i sent Friday on this driver?
-
Yes I did, Thanks. Im waiting on a member to get with me on a possible spare one.Life without music would♭
-
I have a spare MW-6500 that I could part with from 1983 out of a Monitor 5A. I have been reluctant to mention it because it has a slight scrape when you press the cone the wrong way. However, it sounds fine with no noise when playing music. Let me know if interested.
StanStan
Main 2ch:
Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.
HT:
Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60
Other stuff:
Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601 -
-
Pauly
I hooked the speaker up last night and did a signal sweep. It has a slight buzz. I doubt that you would want it.
StanStan
Main 2ch:
Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.
HT:
Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60
Other stuff:
Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601 -
-
never hurts to have a spare..30.00 and you may of had this with a spare passive....
hope you were the last bidder. -
http://www.ebay.com/itm/POLK-AUDIO-MW-6500-DRIVER-5A-7A-10A-AND-OTHERS-/200645311928?pt=Speakers_Subwoofers&hash=item2eb7647db8
http://www.ebay.com/itm/polk-MW6500-/290604325060?pt=Speakers_Subwoofers&hash=item43a95e18c4
http://www.ebay.com/itm/Polk-Audio-Driver-MW6500-6-1-2-/190571738125?pt=Speakers_Subwoofers&hash=item2c5ef5f40d
when it rains it pours Pauly
http://www.ebay.com/itm/Polk-Audio-Monitor-Series-Driver-MW6500-/260845457801?pt=Vintage_Electronics_R2&hash=item3cbb99d189 -
Hay Pauly I just picked up one for my monitor 7s.Like pitdogg2 sayed get yours now there going fast.Dan http://www.ebay.com/sch/i.html?_nkw=polk+mw+6500&_sacat=293&_odkw=polk+mw+6500&_osacat=293&_trksid=p3286.c0.m270.l1313 Be aware the one for 8.00 has a rip in it.
