SDA-2A, Monitor 10, Monitor 7
intangible
Posts: 262
I have an excess set of speakers and can't figure out figure out which ones to sell, so I figured I would check to see if anyone here wanted one of the three pairs. All three sound great, so I will focus the individual descriptions on cosmetic elements. I live in St. Louis and don't think there are a many people on these boards from the area, but I figured it couldn't hurt to put them out there.
First, I have a pair of SDA-2A with interconnect in very nice cosmetic condition. The picture below shows the only cosmetic issue I see with them in the small patch of lifted veneer. The capacitors and resistors have been replaced with Daytons, with the exception of the very large cap in the dimensional circuit. I would like $250 for them, which I realize is more than they would fetch in a higher SDA density area, but I overpaid for them based on the scarcity of SDAs in these parts and would rather hold onto them than take more of a loss on them.
Second, I have a pair of Monitor 10 Series II that aren't horrific to look at but have clearly seen better days. I've included photos of the major blemishes, and there are a number of smaller nicks and scrapes. The capacitors and resistors have been replaced with Daytons. The tweeters have been replaced with RD0198s. I will also include a pair of stands I built for them. I would like $200 for these, considering the $100 in tweeters and $25 in stands there.
Finally, I have a pair of Monitor 7 with SL2000 tweeters. They look very nice, but the bottom of one speakers is enlarged, causing a slight separation from the side panels at the corners. It is difficult to tell with the grill on, but you can see it if you are looking for it. The fellow I bought them from said they were the victim of a small flood. The cabinet is still stable and sealed, so it is purely a cosmetic issue. They are in my kitchen currently, and would be a pain to get down, so I can provide pictures if there is any interest in them. I would like $80 for these.
First, I have a pair of SDA-2A with interconnect in very nice cosmetic condition. The picture below shows the only cosmetic issue I see with them in the small patch of lifted veneer. The capacitors and resistors have been replaced with Daytons, with the exception of the very large cap in the dimensional circuit. I would like $250 for them, which I realize is more than they would fetch in a higher SDA density area, but I overpaid for them based on the scarcity of SDAs in these parts and would rather hold onto them than take more of a loss on them.
Second, I have a pair of Monitor 10 Series II that aren't horrific to look at but have clearly seen better days. I've included photos of the major blemishes, and there are a number of smaller nicks and scrapes. The capacitors and resistors have been replaced with Daytons. The tweeters have been replaced with RD0198s. I will also include a pair of stands I built for them. I would like $200 for these, considering the $100 in tweeters and $25 in stands there.
Finally, I have a pair of Monitor 7 with SL2000 tweeters. They look very nice, but the bottom of one speakers is enlarged, causing a slight separation from the side panels at the corners. It is difficult to tell with the grill on, but you can see it if you are looking for it. The fellow I bought them from said they were the victim of a small flood. The cabinet is still stable and sealed, so it is purely a cosmetic issue. They are in my kitchen currently, and would be a pain to get down, so I can provide pictures if there is any interest in them. I would like $80 for these.
Post edited by intangible on
Comments
-
One bump to drop the Monitor 10s to $175.
-
Location of this bounty of polkness?
-
mccarty250 wrote: »Location of this bounty of polkness?
"I live in St. Louis" (stated in first post):rolleyes: -
Since this got bumped, I will update it. SDAs and Monitor 7s are sold. I'm no longer actively shopping the Monitor 10s, but would still take $200 for them.
