GR Research N2X speakers, LSiC, speaker cables
iskandam
Posts: 704
Hello folks, welcome to iskandam's Summer 2011 Audio Sale 
First up is a pair of GR Research N2X monitors (the ones praedet is currently building). They are only available as a DIY kit, but this pair has been professionally built and finished with Walnut Burl veneer, curved edges, and real leather on the front baffles. They have Vampire binding posts, lined with NO-REZ dampening material inside, and use all Sonicap capacitors and Mills resistors in the crossover (designed by Danny Richie).
Here are their specs:
Next, an LSiC complete with the box, manual, packing material, and everything else it came with originally. I'm selling this for a friend who recently dismantled his LSi HT. There are a couple of light marks on the top, but they are invisible unless you hold it up against a light. Other than that it looks brand new. I hooked it up today and it still plays beautifully.
$350 shipped to anywhere in the U.S. Payment via paypal as "gift."
Finally, a set of three speaker cables that I made using 10 awg silver plated stranded copper with Teflon shielding, braided and terminated with gold BFA banana plugs on both ends. The lengths are 4ft, 6ft, and 7ft. The sonic signature is very similar to PNF Audio Symphony that I owned last year -- neutral but with an extended top end, lots of detail, and excellent bass slam.
$100 shipped to anywhere in the U.S. Payment via paypal as "gift."
First up is a pair of GR Research N2X monitors (the ones praedet is currently building). They are only available as a DIY kit, but this pair has been professionally built and finished with Walnut Burl veneer, curved edges, and real leather on the front baffles. They have Vampire binding posts, lined with NO-REZ dampening material inside, and use all Sonicap capacitors and Mills resistors in the crossover (designed by Danny Richie).
Here are their specs:
- 2-way sealed mini-monitor design
- Parallel network with 1.9kHz crossover point
- Neo-3 pdr with deep back cup (planar magnetic tweeter)
- M-165X 6.5 inch composite paper woofer with phase plug type dust cap, polymer chassis, and vented Kapton voice coil and XBL^ motor
- 3dB is 65hz
- Sensitivity is 85 dB (1watt/1m)
- Recommended amplification is 8-100 watts RMS
- Impedance 8 ohms nominal 6.2 ohms minimal
- Dimensions: 14"H x 8.5"W x 12.5"D
Next, an LSiC complete with the box, manual, packing material, and everything else it came with originally. I'm selling this for a friend who recently dismantled his LSi HT. There are a couple of light marks on the top, but they are invisible unless you hold it up against a light. Other than that it looks brand new. I hooked it up today and it still plays beautifully.
$350 shipped to anywhere in the U.S. Payment via paypal as "gift."
Finally, a set of three speaker cables that I made using 10 awg silver plated stranded copper with Teflon shielding, braided and terminated with gold BFA banana plugs on both ends. The lengths are 4ft, 6ft, and 7ft. The sonic signature is very similar to PNF Audio Symphony that I owned last year -- neutral but with an extended top end, lots of detail, and excellent bass slam.
$100 shipped to anywhere in the U.S. Payment via paypal as "gift."
Post edited by iskandam on
Comments
-
WOW, those look awesome! If you don't mind me asking, why are you getting rid of them?HT: Ninja Master LSi9s, Ninja Master LSiC, Slightly Modded LSiFXs, Modded LSi7s, Outlaw LFM-1 EX and Polk PSW125
Outlaw 970 Preamp, Outlaw 7700 Amp, Velodyne SMS-1, Oppo BDP-83,
2 APC H-15s and a Panamax 5400 for good measure
Stereo: DIY Alix Music Server, DODD Audio Battery Tube Buffer, Modded DAC-60 and MF V-Link (for now), DIY Silver ICs, Battery Powered Class D SDS-254 Amp, and GR-Research N2X Speakers -
I can't wait to see yours finished. I love the bird's eye maple veneer! Out of the 40+ speakers I've owned in the past 4 years I have to say that the N2X are easily the best. I'm only selling to try something else.
-
The 4 ft speaker cable is gone, everything else still available.
-
The N2X's are beautiful, I've heard good things about that speaker. Wish I live closer...
-
The 4 ft speaker cable is gone, everything else still available.
Got it today bro. Thanks for the SUPER FAST shipping! :biggrin:Denon 4311ci
MINIdsp OPEN-DRC
XPR-5
LS6 Line Arrays
LS-C Center Channel
A/V-1RS Surounds
Quad DIY LMS Ultra subs (powered by dual IPR-7500 amps)
Panny AE-8000u
2:35 110in Screen
Oppo BDP-103
Belkin PF60
Harmony ONE
2ch: Emotiva Stealth 8's, Airport Express -
Hope you enjoy itGot it today bro. Thanks for the SUPER FAST shipping! :biggrin:
LSiC has been sold, but the N2Xs and the pair of cables are still available. $75 shipped for the 6ft and 7ft pair to anywhere in the U.S. I will also ship the N2X's at the buyer's expense, but the speaker stands will not be included.
Mods, can you un-SOLD this thread :biggrin: -
Price drop!!
$70 shipped for the pair of speaker cables
$725 for the N2X + shipping via Fed Ex Ground -
-
N2X and speaker cables still available
-
N2X sold
Speaker cable still available -
bump for speaker cable
-
now everything is SOLD
