Parting out my SDA 1Bs - tweeters, PRs, etc

polktiger
polktiger Posts: 556
edited August 2011 in For Sale (FS) Classifieds
I was originally attempting to sell my SDA1Bs.
http://www.polkaudio.com/forums/showthread.php?t=110675

Having no takers, I have started to part them out. I have had one polkie already buy 4 of the 6.5" drivers, and another polkie has expressed interest in the other 4. If anyone wants to be a fallback one those, just let me know. Prices below are as best I can find while searching the forms. But, if these are out of line, let me know. Everything is in working condition. Prices are before shipping, which I was thinking we could split actual cost 50/50

3 SL2000s and 1 RDO 194 - $25 each
2 12" Passive Radiators - $25 each
Blade/Blade interconnect (original with speakers) - $35 each
Original Crossovers -$50 each

If anyone is especially interested in the grill covers, we can look into shipping.
Also the Carver and NAD amps in the original thread if anyone is interested.
Post edited by polktiger on
· Share on FacebookShare on Twitter

Comments

  • gdb
    gdb Posts: 6,012
    edited June 2011
    It's sad to see em get busted up but, a man's gotta do what a man's gotta do. I might be interested in some MWs as a fallback buyer.
    · Share on FacebookShare on Twitter
  • gdb
    gdb Posts: 6,012
    edited June 2011
    Bunch of Polk mutants will be traveling past your area on the trip to FLA., maybe someone can buy em whole and haul em home. (minus the 4 sold MWs)
    · Share on FacebookShare on Twitter
  • bluecomet
    bluecomet Posts: 1,118
    edited June 2011
    I will take the RDO 194. PM me. Thanks.
    Polk HT system 1: LSIC, LSI25 mains, LSI F/X rears, Lsi F/X rear centers,
    Yamaha RX-V2500 System, Carver A753 3 channel amp.

    Polk HT system 2: , SRT system with f/x 1,000's rear speakers on 7.1 system currently using Onkyo TX-RZ820 receiver, powered by Sunfire Grand Theater amp

    Polk Speaker collection: SDA SRS 1.2tl x 2, SRT system, SDA SRS 2 P/B, SDA 2A, SDA 1C Studio, SDA CRS+, Monitor 7B & 4, SRS 3.1tl, RTA 15tl, LS90, LSI 9
    · Share on FacebookShare on Twitter
  • Toolfan66
    Toolfan66 Posts: 17,349
    edited June 2011
    2 12" Passive Radiators - $25 each

    Do these have the weights on the back side???
    Polk Audio SDA 2.3tl Fully Hot Rodded. 😎

    SVS SB16 X2

    Cary SLP-05/Ultimate Upgrade.
    Cary SA-500.1 ES Amps
    Cary DMS 800PV Network
    OPPO UDP 205/ModWright Modification
    VPI Scout TT / Dynavector 20x2
    Jolida JD9 Fully Modified

    VPI MW-1 Cyclone RCM

    MIT Shotgun 3 cables throughout / Except TT, and PC’s
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Bluecomet: PM Sent

    Toolforlifefan: From Doro's SDA driver list, the PRs are the SW120. I have not removed these yet to look at the back, but I have assumed that they have a magnet.

    Edit: Looking at pictures of SW120s, it appears most are styrofoam loaded, some with and some without weights. I can check to see what the look like tonight.
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Update: I have 4 6.5" mids available. These are the MW6509. The initial buyer decided to pass, so they are up should someone want them. $30 each.
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    I did confirm that the SW120s are the version that do not have the magnet on the back.

    Also, the RDO194 has been spoken for and it has been shipped. I still have the 3 SL2000s, 4 MW6509s, the 2 SW120s, and the interconnect and crossovers.
    · Share on FacebookShare on Twitter
  • newbie308
    newbie308 Posts: 773
    edited June 2011
    What is the condition of the cabinets, & are they for sale?
    Sources: Technics SL1200MKII | SME3009 Tonearm | Monster Alpha 1 MC cartridge | Oppo UDP203 disk player | Nikko NT-790 analog tuner | Musical Fidelity Trivista 21 DAC | Preamp: Threshold SL-10 | Amplifier: Threshold Stasis 2 | Speakers: Snell Acoustics C/V | Kimber 12-TC bi wire speakers | Analysis plus Oval 1 preamp to amp | Wireworld Eclipse 7 DAC to Preamp | Wireworld eclipse digital IC Oppo to DAC | Audioquest Quartz tuner to preamp |
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,577
    edited June 2011
    I'll take the PR's.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • stubby
    stubby Posts: 723
    edited June 2011
    I'll take the 6.5's.
    SRS 3.1TL
    Harman Kardon Citation 5.1
    Anthem AVM2



    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    PMs sent on the PRs and the 6.5s.

    The cabinets are for sale. I described the condition in the original sale thread. They are for the most part in good condition with few marks visable. When I pruchased the speakers, there is some water damage to a portion the square "stand" on the bottom of the speakers. It is really just cosmetic, and actually hard to see.

    The only problem with selling the cabinets is shipping. I don't have the original boxes. Shoot me a PM and we can discuss further.
    · Share on FacebookShare on Twitter
  • newbie308
    newbie308 Posts: 773
    edited June 2011
    I sent you a PM. What's up?
    Sources: Technics SL1200MKII | SME3009 Tonearm | Monster Alpha 1 MC cartridge | Oppo UDP203 disk player | Nikko NT-790 analog tuner | Musical Fidelity Trivista 21 DAC | Preamp: Threshold SL-10 | Amplifier: Threshold Stasis 2 | Speakers: Snell Acoustics C/V | Kimber 12-TC bi wire speakers | Analysis plus Oval 1 preamp to amp | Wireworld Eclipse 7 DAC to Preamp | Wireworld eclipse digital IC Oppo to DAC | Audioquest Quartz tuner to preamp |
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    newbie308 wrote: »
    I sent you a PM. What's up?

    I attempted to respond to the PM, I thought it went through, but it didn't show up in my inbox like a normal private message. I guess it didn't make it to you.

    The cabinets are in good shape. I described them in the original, linked for sale thread. The only blemish/damage is to a corner on one of the particle board "feet" that the main cabinets sit on. It does not affect the cabinets, and it is only visable if you get down on the floor. Shipping the cabinets will be difficult since I have no original packaging. They are for sale, but I see shipping as the main hurdle.
    · Share on FacebookShare on Twitter
  • Bnewsom
    Bnewsom Posts: 26
    edited June 2011
    Still have the SL2000s?
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Bnewsom wrote: »
    Still have the SL2000s?

    Yes.
    · Share on FacebookShare on Twitter
  • Starbuck1851
    Starbuck1851 Posts: 19
    edited June 2011
    Is the interconnect cable the stock (oem) item or one of the aftermarket built-up type cables (with clamp-on connectors?) I'd be interested in an original one if that's what you've got... thnx
    Polk Monitor 4
    Polk Monitor 5jr+
    Polk Monitor 5B
    Polk SDA 2B Studio
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Starbuck1851 wrote: »
    Is the interconnect cable the stock (oem) item or one of the aftermarket built-up type cables (with clamp-on connectors?) I'd be interested in an original one if that's what you've got... thnx

    My understanding from the guy I bought the speakers from is that it is stock, but I will take a picture and post this evening.
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    newbie 308: Look and see if you have a "visitor message." The message I received from you came to be as a visitor message, and when I look under visitor messages I see your message and my response.
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Sale pending to Stubby for the 4 remaining 6.5"s.

    As requested, here is a pic of the blade/blade interconnect. I tried to take a close up of the plugs, but they came out very blurry. I will post it anyway.
    · Share on FacebookShare on Twitter
  • paingod
    paingod Posts: 31
    edited June 2011
    ill take 2 drivers & 2 tweets if you have them?
    · Share on FacebookShare on Twitter
  • Starbuck1851
    Starbuck1851 Posts: 19
    edited June 2011
    polktiger wrote: »
    Sale pending to Stubby for the 4 remaining 6.5"s.

    As requested, here is a pic of the blade/blade interconnect. I tried to take a close up of the plugs, but they came out very blurry. I will post it anyway.

    I'll take the cable, thnx!
    Polk Monitor 4
    Polk Monitor 5jr+
    Polk Monitor 5B
    Polk SDA 2B Studio
    · Share on FacebookShare on Twitter
  • polktiger
    polktiger Posts: 556
    edited June 2011
    Update:
    All Mid drivers have been sold - geoff727 & stubby
    Blade/Blade IC has been sold - Starbuck1851
    RDO 194 sold - bluecomet
    2 PRs SW 120 - I am preparing to ship to dorokusai

    Still Available:
    3 SL2000s - A couple people have inquired, but none are sold yet
    Crossovers - still available
    Cabinets, covers, any other parts - still available
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,577
    edited August 2011
    Polktiger - Where are the PR's?? The label and money was sent and we communicated after that was confirmed....
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • stubby
    stubby Posts: 723
    edited August 2011
    Doro, I know this doesn't help much, but I did receive my 6509s almost a month ago. Hope your PRs did not get lost in shipment.
    SRS 3.1TL
    Harman Kardon Citation 5.1
    Anthem AVM2



    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,577
    edited August 2011
    stubby wrote: »
    Doro, I know this doesn't help much, but I did receive my 6509s almost a month ago. Hope your PRs did not get lost in shipment.

    That's cool man. I'm betting it is simply a mistake or lapse in communication perhaps. I'm not stressed for now. Thanks Stubby :redface:
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter