Sharp XV-Z12000 projector

cstmar01
cstmar01 Posts: 4,424
Putting my projector up for sale. Around 300 hours on an original bulb and have the original packaging that this came in. This is 720P but honestly is a nice PJ and if you use a screen with some gain to it, will have a nice picture as well. (for brightness, a 1.1 gain screen works just fine as its what I have but if you want some more "pop" a higher gain will add some to it).

Asking 450.00 +shipping and if doing paypal please add 3%. My zip is 54467 and figure around 25-30lbs as it is not light.

For the price its very hard to beat, when this projector first came out it was a LOT more than 400 bucks and IMO your not going to find as good of a PJ for this price.
Post edited by cstmar01 on

Comments

  • polkfarmboy
    polkfarmboy Posts: 5,703
    edited February 2011
    When sitting 15 foot from a 100 inch pj screen its the quality of the image that stands out and not the resolution

    This is a dlp projector and does not suffer from image degradation like lcd does over time

    This is a very good deal and should selll in a heartbeat with its outstanding above par image quality and black level ,, This retailed for about 3K in 2009 and if I never had 2 pj's I would snag this one
  • cstmar01
    cstmar01 Posts: 4,424
    edited February 2011
    400.00 for polkies +shipping and 3% if using paypal.

    BTW I did like this better than the Epson 8350 for black levels.
  • CLPolk
    CLPolk Posts: 133
    edited February 2011
    Take Guns on trade?
    • SDA SRS 2
    • SDA 1A
    • Monitor 11
    • Monitor 7B
    • CS350lsi
    • RM-6600
    • FX500i
  • cstmar01
    cstmar01 Posts: 4,424
    edited February 2011
    Sorry but not looking for trades.
  • cstmar01
    cstmar01 Posts: 4,424
    edited February 2011
    375.00 +shipping for polkies only, paypal ad 3%.

    the bulbs cost more than my asking price alone....and its still got 1700 hours left to go...
  • cstmar01
    cstmar01 Posts: 4,424
    edited March 2011
    offer still at 375.00 +shipping and 3% paypal. My new one is on the way so this needs to GO NOW!
  • cstmar01
    cstmar01 Posts: 4,424
    edited April 2011
    325.00 plus shipping ad 3% for paypal.
  • cstmar01
    cstmar01 Posts: 4,424
    edited April 2011
    bump.

    Seriously no one is interested? A new bulb cost more than what I'm asking for the PJ and a bulb with only 350 hours on it.

    Its not a bad PJ you can check out screen shots that I've posted on the forum before. Very smooth. The blacks are very very good and the image for 325.00 bucks is great.
  • jinjuku
    jinjuku Posts: 1,523
    edited April 2011
    That is an insane deal on a really good projector
  • cstmar01
    cstmar01 Posts: 4,424
    edited April 2011
  • dcmartinpc
    dcmartinpc Posts: 844
    edited April 2011
    Thanks Chris! I think this will be a nice upgrade to my current projector!

    Don
    Living Room: Adcom GFP-750 (Upgraded), Squeezebox Touch, Oppo BDP-83, Pioneer DV-79AVi, Parasound HCA-3500 (Upgraded), SDA SRS 2 P/B (Gimpod, Sonicaps, & Mills)

    Theater: Denon 4311ci, Oppo BDP-93, Parasound HCA-2205+HCA-2200II, Polk LSi9, LSiC, LSiFX, LSi7, Custom 18" TC Sounds sub with 2 18" PR, Sharp XV-Z12000, Pioneer Kuro KRP-500M (isf Enabled)

    Bedroom: HK AVR354, Pioneer DV-47a, Parasound HCA-1500a, Polk LSi9
  • cstmar01
    cstmar01 Posts: 4,424
    edited April 2011
    Sold to Don. Thanks again!
  • leroyjr1
    leroyjr1 Posts: 8,785
    edited April 2011
    dcmartinpc wrote: »
    Thanks Chris! I think this will be a nice upgrade to my current projector!

    Don

    Hows that epik?
  • dcmartinpc
    dcmartinpc Posts: 844
    edited April 2011
    Still sitting in the box! This new projector is going to motivate me to get the home theater re-calibrated. I have purchased the second Epik Sentinel, this new projector, a Parasound HCA-2200II for front channel duty (It looks pretty sitting next to its 5 channel brother (2205a), and a pair of LSiFX to add for side surround's.... I have pulled all this together over the last several months, time to integrate it all!!! I think I am going to make a little noise!

    Don
    Living Room: Adcom GFP-750 (Upgraded), Squeezebox Touch, Oppo BDP-83, Pioneer DV-79AVi, Parasound HCA-3500 (Upgraded), SDA SRS 2 P/B (Gimpod, Sonicaps, & Mills)

    Theater: Denon 4311ci, Oppo BDP-93, Parasound HCA-2205+HCA-2200II, Polk LSi9, LSiC, LSiFX, LSi7, Custom 18" TC Sounds sub with 2 18" PR, Sharp XV-Z12000, Pioneer Kuro KRP-500M (isf Enabled)

    Bedroom: HK AVR354, Pioneer DV-47a, Parasound HCA-1500a, Polk LSi9
  • leroyjr1
    leroyjr1 Posts: 8,785
    edited April 2011
    dcmartinpc wrote: »
    Still sitting in the box! This new projector is going to motivate me to get the home theater re-calibrated. I have purchased the second Epik Sentinel, this new projector, a Parasound HCA-2200II for front channel duty (It looks pretty sitting next to its 5 channel brother (2205a), and a pair of LSiFX to add for side surround's.... I have pulled all this together over the last several months, time to integrate it all!!! I think I am going to make a little noise!

    Don

    Love that parasound gear. Make sure you post pics when it's all complete.
  • dcmartinpc
    dcmartinpc Posts: 844
    edited April 2011
    Yeah, I have fallen in love with Parasound. I think I am finally going to do a System showcase here once it is all done!

    Don
    Living Room: Adcom GFP-750 (Upgraded), Squeezebox Touch, Oppo BDP-83, Pioneer DV-79AVi, Parasound HCA-3500 (Upgraded), SDA SRS 2 P/B (Gimpod, Sonicaps, & Mills)

    Theater: Denon 4311ci, Oppo BDP-93, Parasound HCA-2205+HCA-2200II, Polk LSi9, LSiC, LSiFX, LSi7, Custom 18" TC Sounds sub with 2 18" PR, Sharp XV-Z12000, Pioneer Kuro KRP-500M (isf Enabled)

    Bedroom: HK AVR354, Pioneer DV-47a, Parasound HCA-1500a, Polk LSi9