Nakamichi, Adcom, Yamaha
curved
Posts: 664
Nakamichi CA-5 Pre-Amp $200 + Shipping Cost:
Very nice condition and sounds outstanding. Extremely open and detailed when paired with both the 545 and 555. Excellent phono stage as well.
Minimalist design w/high quality parts
Short signal paths for better sonic performance
1,800uF (x2) Filter Capacitors
1% metal film resistors and 2% film dielectric capacitors used throughout
Input devices are FETs w/Bi Polar transistors for the output
Gold plated inputs and outputs
Shielded power transformer far removed from the audio circuitry
Individual discrete audio blocks, for power supply, line amplifier, and phono section divided into Left and Right banks
Three heavy gauge solid copper power rails run through the middle (positive, ground, negative) (see photo) NOT a PCB trace to supply power to each audio block.
31 step ALPS volume attenuator
ALPS selectors and balance control
4 inputs and 2 tape loops and 2 sets of outputs (for biamping)
Selectable 50, 100, 200 ohm MC phono pickups
Selectable 47k ohms in parallel w/ 100, 200, 300pF of capacitance for MM cartridges
Weight 8 lbs 6 oz
Adcom 545II - S200 + Shipping Cost
Also in nice condition. Some wear marks on the top from stacking. Bought it from a fellow polk member and has been used to do some light 2-channel listening and powered my JBL's
Yamaha RX-V757 Receiver - $150 + Shipping Cost
It is in good condition. There are a couple scrathes on the face, but obviously doens't affect the sound. Every channel works great.
The button for the AM/FM on the face is the only thing that doesn't work. The remote can easily change.
http://usa.yamaha.com/products/audio-visual/hifi-components/stereo-receivers/rx-v757_black__u/?mode=model
Pics to come shortly.
Very nice condition and sounds outstanding. Extremely open and detailed when paired with both the 545 and 555. Excellent phono stage as well.
Minimalist design w/high quality parts
Short signal paths for better sonic performance
1,800uF (x2) Filter Capacitors
1% metal film resistors and 2% film dielectric capacitors used throughout
Input devices are FETs w/Bi Polar transistors for the output
Gold plated inputs and outputs
Shielded power transformer far removed from the audio circuitry
Individual discrete audio blocks, for power supply, line amplifier, and phono section divided into Left and Right banks
Three heavy gauge solid copper power rails run through the middle (positive, ground, negative) (see photo) NOT a PCB trace to supply power to each audio block.
31 step ALPS volume attenuator
ALPS selectors and balance control
4 inputs and 2 tape loops and 2 sets of outputs (for biamping)
Selectable 50, 100, 200 ohm MC phono pickups
Selectable 47k ohms in parallel w/ 100, 200, 300pF of capacitance for MM cartridges
Weight 8 lbs 6 oz
Adcom 545II - S200 + Shipping Cost
Also in nice condition. Some wear marks on the top from stacking. Bought it from a fellow polk member and has been used to do some light 2-channel listening and powered my JBL's
Yamaha RX-V757 Receiver - $150 + Shipping Cost
It is in good condition. There are a couple scrathes on the face, but obviously doens't affect the sound. Every channel works great.
The button for the AM/FM on the face is the only thing that doesn't work. The remote can easily change.
http://usa.yamaha.com/products/audio-visual/hifi-components/stereo-receivers/rx-v757_black__u/?mode=model
Pics to come shortly.
Living Room:....................[HTML] [/HTML] Zone 2 (Workout Room):
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors**
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors**
Post edited by curved on
Comments
-
Pics of the Nakamichi CA-5Living Room:....................[HTML] [/HTML] Zone 2 (Workout Room):
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors** -
Pics of the Adcom:Living Room:....................[HTML] [/HTML] Zone 2 (Workout Room):
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors** -
Pics of the Yamaha:Living Room:....................[HTML] [/HTML] Zone 2 (Workout Room):
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors** -
I hate spam, but this actually made me laugh. It's like the mind's dialogue of a high school senior on prom nightLiving Room 2 Channel -
Schiit SYS Passive Pre. Jolida CD player. Songbird streamer. California Audio Labs Sigma II DAC, DIY 300as1/a1 Ice modules Class D amp. LSi15 with MM842 woofer upgrade, Nordost Blue Heaven and Unity interconnects.
Upstairs 2 Channel Rig -
Prometheus Ref. TVC passive pre, SAE A-205 Amp, Wiim pro streamer and Topping E50 DAC, California Audio Labs DX1 CD player, Von Schweikert VR3.5 speakers.
Studio Rig - Scarlett 18i20(Gen3) DAW, Mac Mini, Aiyma A07 Max (BridgedX2), Totem Mites -
The Yamaha is sold!!
Adcom is now at $200 with shipping included. Make an offer....it's a nice sounding amp.Living Room:....................[HTML] [/HTML] Zone 2 (Workout Room):
AVR - Yamaha RX-V757......JBL 4312 Pro Monitors
Pre - Nak CA-5
AMP - Adcom 555 (Main)
Main - Polk RTI8**/RTiA5
AMP - Adcom 545II (Center)
Center - Polk CSiA4**
Sub - Snell Basis 300:p......Zone 3 (Outside)
CD - Yamaha CDC-555.......Def Tech AW5500
TV - Pani TH-42PZ80U
BR - LG BD390
Monster HTS1600 Power Center
Dedicated Circuit - (2) 20amp, (1) 15amp
Ben's IC, Canare 4S11
**Dayton and Sonicap Caps with Mills Resistors** -
Curved, do you still have the Nakamichi CA-5? If so, I am interested.2 Channel
Polk SDA SRS, Nakamichi Pa-5 Preamp, PA-7 Amp, Shenda (Jolida) SD100S CD Player (Sylvania Gold Brand 5751 & Amperex Holland, Orange Globe 12au7 tubes).
Home Theatre
Onkyo SR707, Samsung Blu Ray,Sony 400 Disc DVD Changer, Sony 46" LCD (Model?)
Speakers: Front L/R: JBL L7, Center: JBL LC1, Surround: TBD (likely JBL L1)
Car: Clarion 9255-DRX, Adcom GFA 4702, GFA 4404, Pioneer TS-A1702c (Front and Rear), 2 Boston Acoustics 12.5LF subs