Denon DVD-2910

cambir
cambir Posts: 1,046
edited February 2011 in For Sale (FS) Classifieds
Good condition. Very minor wear on the top edge of the faceplate and a small nick on the face near the power button. As seen in the pic, the previous owner must have had a difficult time with an HDMI connection.

Original remote, manual and power cable included.

I would prefer a local sale, but may consider shipping.
$130 for a local
Post edited by cambir on
· Share on FacebookShare on Twitter

Comments

  • daboyz
    daboyz Posts: 5,207
    edited January 2011
    Damn,Cam. Selling the 2910? Are you OK?:wink:

    Good deal here. Great piece.
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    I'm selling it if someone will buy it!

    I'll regret it for sure, but time for a change. Just picked up an Elite BDP for the HT and want something with a slimmer profile for the bedroom setup.
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    $120 to come pick it up

    $140 shipped
    · Share on FacebookShare on Twitter
  • avguytx
    avguytx Posts: 1,628
    edited January 2011
    I'm assuming that these players don't have variable output when using the 2-channel RCA's do they?
    Richard? Who's your favorite Little Rascal? Alfalfa? Or is it........................Spanky?.................................Sinner.
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 25,739
    edited January 2011
    the previous owner must have had a difficult time with an HDMI connection.

    Boy i guess so looks like screwdriveritis. Does it (HDMI) still work?
    · Share on FacebookShare on Twitter
  • cnh
    cnh Posts: 13,284
    edited January 2011
    That's supposed to have a pretty good transport in it. Why not do what a lot of people here do....keep it and buy a nice DAC unit for it?

    Just a thought.

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    avguytx wrote: »
    I'm assuming that these players don't have variable output when using the 2-channel RCA's do they?

    I don't think so.
    pitdogg2 wrote: »
    the previous owner must have had a difficult time with an HDMI connection.

    Boy i guess so looks like screwdriveritis. Does it (HDMI) still work?

    HDMI still works perfect.
    cnh wrote: »
    That's supposed to have a pretty good transport in it. Why not do what a lot of people here do....keep it and buy a nice DAC unit for it?

    Just a thought.

    cnh

    It was not getting enough venting in my HT cabinet. Was planning on buying the 1940 in FM for a bedroom, but may have to just keep this.
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    edited January 2011
    pm sent
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • comfortablycurt
    comfortablycurt Posts: 6,745
    edited January 2011
    For $140 this is a no brainer. Someone jump on it.

    The 2910 is a fantastic sounding SACD player...and is also an excellent sounding Redbook player...even using the internal DAC's. An external DAC will typically make for an improvement, but I wouldn't consider it to be an absolute necessity with this player(depending on associated gear of course). It's Redbook playback quality is really quite exceptional, give it's price range. I'm VERY happy with mine. It's also a fantastic DVD player on to of all that. It can also decode basically every disc known to man, aside from Blu-ray. Redbook, SACD, DVD-A, HDCD, DVD, DVD-R/RW...it can even decode a bunch of different kinds of picture discs and whatnot.


    @avguytx-No, the 2910 doesn't have variable output. It's a fixed level output, regardless of the connection method.
    The nirvana inducer-
    APC H10 Power Conditioner
    Marantz UD5005 universal player
    Parasound Halo P5 preamp
    Parasound HCA-1200II power amp
    PolkAudio LSi9's/PolkAudio SDA 2A's/PolkAudio Monitor 7A's
    Audioquest Speaker Cables and IC's
    · Share on FacebookShare on Twitter
  • daboyz
    daboyz Posts: 5,207
    edited January 2011
    Let's go people!! Great player from a great dude. No worries here.
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    erniejade wrote: »
    pm sent

    sold!
    · Share on FacebookShare on Twitter
  • cnh
    cnh Posts: 13,284
    edited January 2011
    Looks like daboyz rant did the job!!

    Congrats to cambir and to the lucky devil who picked this up--it's a NICE piece!

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    edited January 2011
    Thanks I figure this would be a good way to get into sacd. for reg cd's it will go against my jolida though. lol Heck i can always add a tube buffer.
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    edited January 2011
    cambir has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

    tried to send you a pm to let you know it arrived in one piece.

    Playing it for 4 hours so far no heat at all ( cd only not dvd) good packing also.

    The only thing i noticed, i was surprised i can actually feel a vibration on the player while it is playing. It has not skipped or missed anything but, I have not had this with my jolida, or sony cd players. Might just be a trait of the unit. It does sound I think better then my sony, a bit more in the low end and not as harsh in the top end. I have not put it up against the jolida as i thought it would be not a fair fight, but, then again, they were close to the same in retail... hummm. I might try it.



    THanks
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • dorokusai
    dorokusai Posts: 25,577
    edited January 2011
    erniejade wrote: »
    cambir has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

    tried to send you a pm to let you know it arrived in one piece.

    Playing it for 4 hours so far no heat at all ( cd only not dvd) good packing also.

    The only thing i noticed, i was surprised i can actually feel a vibration on the player while it is playing. It has not skipped or missed anything but, I have not had this with my jolida, or sony cd players. Might just be a trait of the unit. It does sound I think better then my sony, a bit more in the low end and not as harsh in the top end. I have not put it up against the jolida as i thought it would be not a fair fight, but, then again, they were close to the same in retail... hummm. I might try it.



    THanks

    You might try some Dynamat on the inside chassis coupled with a Bright Star Audio, Little Rock for the top. That should tame almost every vibration issue for about $60-80 and change the entire presentation.
    CTC BBQ Amplifier, Sonic Frontiers Line3 Pre-Amplifier and Wadia 581 SACD player. Speakers? Always changing but for now, Mission Argonauts I picked up for $50 bucks, mint.
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    erniejade wrote: »
    cambir has exceeded their stored private messages quota and cannot accept further messages until they clear some space.

    tried to send you a pm to let you know it arrived in one piece.

    Playing it for 4 hours so far no heat at all ( cd only not dvd) good packing also.

    The only thing i noticed, i was surprised i can actually feel a vibration on the player while it is playing. It has not skipped or missed anything but, I have not had this with my jolida, or sony cd players. Might just be a trait of the unit. It does sound I think better then my sony, a bit more in the low end and not as harsh in the top end. I have not put it up against the jolida as i thought it would be not a fair fight, but, then again, they were close to the same in retail... hummm. I might try it.

    THanks

    Sorry, cleaned out PMs. Glad the player arrived safely and happy to hear it isn't heating up like it did in my cabinet.

    I did notice some vibration as well, but figured it was normal (or due to my placement) since I never had a problem with skips either. I found the same results compared to a Sony player...more in the bottom and took the edge off the top.
    · Share on FacebookShare on Twitter
  • cambir
    cambir Posts: 1,046
    edited January 2011
    dorokusai wrote: »
    You might try some Dynamat on the inside chassis coupled with a Bright Star Audio, Little Rock for the top. That should tame almost every vibration issue for about $60-80 and change the entire presentation.

    Thanks doro!
    · Share on FacebookShare on Twitter
  • erniejade
    erniejade Posts: 6,321
    edited January 2011
    I talked to another member here who has the same player and it does the same thing. so it must be a trait of the unit.


    I am going to take doro's advice though and give it that little extra lol


    Thanks!!
    Klipsch The Nines, Audioquest Thunderbird Interconnect, Innuos Zen MK3 W4S recovery, Revolution Audio Labs USB & Ethernet, Border Patrol SE-I, Audioquest Niagara 5000 & Thunder, Cullen Crossover II PC's.
    · Share on FacebookShare on Twitter
  • ben62670
    ben62670 Posts: 15,969
    edited January 2011
    Have you tried magic pebles?
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
    · Share on FacebookShare on Twitter
  • Vedder323
    Vedder323 Posts: 1
    edited January 2011
    If anyone missed out on this, I have a 2910 with no remote ill sell for $130 shipped. Contact me at RBrenay A T gmail.com
    · Share on FacebookShare on Twitter
  • Polkie2009
    Polkie2009 Posts: 3,834
    edited January 2011
    You only have 1 post.
    · Share on FacebookShare on Twitter
  • ben62670
    ben62670 Posts: 15,969
    edited February 2011
    reported
    Please. Please contact me a ben62670 @ yahoo.com. Make sure to include who you are, and you are from Polk so I don't delete your email. Also I am now physically unable to work on any projects. If you need help let these guys know. There are many people who will help if you let them know where you are.
    Thanks
    Ben
    · Share on FacebookShare on Twitter