Would The PSW 10 Do Well With This Combo?

PolkNewb
PolkNewb Posts: 45
edited December 2010 in Electronics
Hi All,

Getting ready to pull the trigger on my H/T system after about 6 months or so of research. I just wanted a little more critique before I do it. The main purpose of this post is to critique this sub....basically Amazon is offering a deal where if you buy two Polk floorstanding speakers you get the PSW 10 Monitor series sub for free. I did have the PSW505 in my cart of for the longest time but now there is around $200-$250 that could be saved by doing this bundle deal. Would this sub suffice with this set up?

Receiver: Onkyo TX-SR707
Floorstanding: Polk Tsi 300
Surrounds: Polk Tsi 100
Center: Polk CS20
Sub: PSW10 Monitor

Now obviously I realize that the PSW505 would be ideal but if I can get somewhat comparable performance with the sub in the package and save a couple of hundred bucks in the process I would prefer that approach. Critique away please!

Jeff
Post edited by PolkNewb on

Comments

  • WilliamM2
    WilliamM2 Posts: 4,808
    edited December 2010
    The PSW10 doesn't compare to the 505 at all. It's probably the worst sounding sub I've ever experienced. More port noise than actual output. I bought one to enhance some bookshelf speakers I have in zone 2. They sound better without it.
  • HTguru1982
    HTguru1982 Posts: 1,066
    edited December 2010
    I second that. The PSW10 is terrible. The 505 is MUCH better.
    Display: Sony 42" LCD
    Sources: Harman Kardon DVD-27,
    Panasonic DMP-BDT110 blu ray player
    AVR: Sony STR-DA2400ES
    Amps: Sonance Sonamp 260(fronts),
    Kenwood KM-894(surrounds)
    Fronts: NHT 2.5
    Center: NHT VS-1.2A
    Surrounds: NHT Super One
    Subwoofer: SVS PB10-ISD
  • Knucklehead
    Knucklehead Posts: 3,602
    edited December 2010
    I had a PSW10 sub, while it is very weak for home theater, its not a bad little sub, just dont expect much from it. I would go with the 505, Newegg.com had it for $205 w/free shipping.
    Polk Audio Surround Bar 360
    Mirage PS-12
    LG BDP-550
    Motorola HD FIOS DVR
    Panasonic 42" Plasma
    XBOX 360[/SIZE]

    Office stuff

    Allied 395 receiver
    Pioneer CDP PD-M430
    RT8t's & Wharfedale Diamond II's[/SIZE]

    Life is one grand, sweet song, so start the music. ~Ronald Reagan
  • cnh
    cnh Posts: 13,284
    edited December 2010
    On sale you can get the 505 for just a bit over 200 dollars from either jr.com or newegg.com so why even bother with the PSW10?

    The PSW12 was my first sub and though better than the 10 the PORT noise required hours of tweaking....before I found a place in the room where I could barely hear it. Those earlier subs REALLY did not like to be PUSHED. They're not bad at LOW volumes but once the LFEs get going....watch out.

    Save yourself some headaches and go with the PSW505.

    cnh
    Currently orbiting Bowie's Blackstar.!

    Polk Lsi-7s, Def Tech 8" sub, HK 3490, HK HD 990 (CDP/DAC), AKG Q701s
    [sig. changed on a monthly basis as I rotate in and out of my stash]
  • TECHNOKID
    TECHNOKID Posts: 4,298
    edited December 2010
    WilliamM2 wrote: »
    The PSW10 doesn't compare to the 505 at all. It's probably the worst sounding sub I've ever experienced. More port noise than actual output. I bought one to enhance some bookshelf speakers I have in zone 2. They sound better without it.
    HTguru1982 wrote: »
    I second that. The PSW10 is terrible. The 505 is MUCH better.
    I had a PSW10 sub, while it is very weak for home theater, its not a bad little sub, just dont expect much from it. I would go with the 505, Newegg.com had it for $205 w/free shipping.
    cnh wrote: »
    On sale you can get the 505 for just a bit over 200 dollars from either jr.com or newegg.com so why even bother with the PSW10?

    The PSW12 was my first sub and though better than the 10 the PORT noise required hours of tweaking....before I found a place in the room where I could barely hear it. Those earlier subs REALLY did not like to be PUSHED. They're not bad at LOW volumes but once the LFEs get going....watch out.

    Save yourself some headaches and go with the PSW505.

    cnh
    Well, it all been said, all I can do is confirm what everyone elses pointed out.

    1. The PSW10 is the bottom crop of the PSW line and yes it has been reported on many occasions that there are some port issues.

    2. The PSW10 and the PSW505 are night and days, NO comparision what so ever.

    3. The PSW505 is also a great match/support for the TSis, Monitors and RTi As in my opinion.

    4. Some options are you could try convince amazon to replace the PSW10 for a PSW505 and if need be maybe pay a little extra for the trade or if they are not willing to go for such deal, buy the 505 and use the cheapy sub elsewhere or sell it as brand new un-opened box for lets say 100$ or maybe give it away to a loved one at Xmas (there are always people that can not afford good audio and would be content to use such small sub).

    IMO, the TSi might provide a better SQ as stand alone without that sub anyway.

    When it is free, there is usally a good reason, remember "you get what you pay for" (exception of Polk's generosity/give aways :cool:)
    DARE TO SOAR:
    “Your attitude, almost always determine your altitude in life” ;)
  • PolkNewb
    PolkNewb Posts: 45
    edited December 2010
    Lol, thanks for all of the input guys, I figured this is what I would get just wanted to be sure that they werent giving away a real gem :-).