PSW1000 information?
Toxis
Posts: 5,116
Random question. The PSW1000, what impedance drivers are used? Are they SVC or DVC?
To any owners or people who've listened to it, how's it sound? The specs say it's -3db down point is 30htz so does this really not dig down deep? I mean dual 10's ported?? Hmmm...
To any owners or people who've listened to it, how's it sound? The specs say it's -3db down point is 30htz so does this really not dig down deep? I mean dual 10's ported?? Hmmm...
Never kick a fresh **** on a hot day.
Home Setup: Sony VPL-VW85 Projo, 92" Stewart Firehawk, Pioneer Elite SC-65, PS3, RTi12 fronts, CSi5, FXi6 rears, RTi6 surround backs, RTi4 height, MFW-15 Subwoofer.
Car Setup: OEM Radio, RF 360.2v2, Polk SR6500 quad amped off 4 Xtant 1.1 100w mono amps, Xtant 6.1 to run an eD 13av.2, all Stinger wiring and Raammat deadener.
Home Setup: Sony VPL-VW85 Projo, 92" Stewart Firehawk, Pioneer Elite SC-65, PS3, RTi12 fronts, CSi5, FXi6 rears, RTi6 surround backs, RTi4 height, MFW-15 Subwoofer.
Car Setup: OEM Radio, RF 360.2v2, Polk SR6500 quad amped off 4 Xtant 1.1 100w mono amps, Xtant 6.1 to run an eD 13av.2, all Stinger wiring and Raammat deadener.
Post edited by Toxis on
Comments
-
I got the schematics from polk because I'm going to try and put a plate amp into one that had it gone (the sub I got from Russ). The only thing I know about the drivers was "The woofers are rated at: 1.75ohms wired in series. 4ohm at the amplifier."
The rest I don't know and the schematics are insane for me to read through (not as simple as I thought) -
I have a question maybe a guru can answer:
Was this sub a push-pull design, or are both subs operating in phase?
