leaning to the left
Mixolydian
Posts: 2
I have a pair of sda 2's. The cabinets were trashed so I made some new ones. I was lucky enough to work for a veneer company that had a 5 axis cnc router that yes I was the operator. To the point when I put the speakers back together I noticed that everything seems to lean to the left a bit. I've checked the drivers and they are all in working condition. I've rechecked the wiring in case I messed that up but it all looks good according to the schematics. I even had the amp checked to make sure there was no imbalance, everything is fine here also. Any help would be appreciated.
Post edited by Mixolydian on
Comments
-
Mixolydian wrote: »I have a pair of sda 2's. The cabinets were trashed so I made some new ones. I was lucky enough to work for a veneer company that had a 5 axis cnc router that yes I was the operator. To the point when I put the speakers back together I noticed that everything seems to lean to the left a bit. I've checked the drivers and they are all in working condition. I've rechecked the wiring in case I messed that up but it all looks good according to the schematics. I even had the amp checked to make sure there was no imbalance, everything is fine here also. Any help would be appreciated.
Never know, the right RCA on the amp could have some buildup. Or your Right speaker post. Dexoit?
Welcome to Club Polk eh. -
I'll do a clean up on all the contacts. It's often the simplest things that get overlooked.
