-
Re: SDA 1C speaker post polarity
Pull four screws on each speaker, pop the terminal cups out. The post that's connected to a white wire is the negative.1 · -
Re: Budget Spikes. Spike your SDAs for under $3!
Putting a pad under the spike removes the effectiveness of the spike. Might as well just use the regular feet the speaker came with.1 · -
Re: Proper SDA functionality, tests?
I don't know what you mean by "scream", but this sounds to me like you have polarity problems. The out-of-phase sound should be diffuse and hard to localize. The in-phase sounds should…1 · -
Re: SDA 1C's
Common-ground amplifier? You need a simple wire from pin terminal to pin terminal. OEM was ~16 gauge, I think. The difficult part is getting something to fit the existing pin terminal. I'm told …1 · -
Re: Remember to epoxy your woofer magnets!
Both areas are susceptible to breaking the glue bond. NO!!!! The epoxy or the Power Grab is used as "insurance" to supplement the original adhesive. This is done while the driver STILL WORK…2 ·
