my custom sub

ward91
ward91 Posts: 338
edited February 2006 in DIY, Mods & Tweaks
my custom sub

it is aprox 2ft x 3ft x 2ft
it has acoustic wadding all the way around top and bottem and some thick pices of foam in it on the bottem and back .

thw woofer is a dbaudio raptor 12
550wrms

the test tone results wont be 100% right as the meter thing was calibrated at 1khz
(the duller picture is a pic of the woofer moving)

i am going to sand it down and spray paint it as i am not too sure at the finsh.

it looks worse on the pics

it sounds good i dont think i will ad a port as it may sound boomy ? its a simple sealed enclosure made of chipboard.

at the minute i have a crappy amp powering it that gives a total of around 100wrms i am hoping to get a amp of ebay tomorow thats 2x 100wrms.
ELECTRONICS
arcam cd93
linn wakonda
MC2 MC450
Teac ud h01 DAC


SPEAKERS
Tannoy DC6 t se .
Post edited by ward91 on
· Share on FacebookShare on Twitter

Comments

  • ward91
    ward91 Posts: 338
    edited February 2006
    i got the amp of ebay but unfortuanetly it doesnt work.

    we opend it for a look and the first bank of transistors has blown along with some risistors and a diode. my dad can fix it if we can get all the parts . we havent taken it apart for a good look but i thought i would ask on here if aneyoue knows where Mutant get their components from (especialy the class A/B transistors)??

    the amp is a mutant nw 2100 xp AB class operation amp.
    ELECTRONICS
    arcam cd93
    linn wakonda
    MC2 MC450
    Teac ud h01 DAC


    SPEAKERS
    Tannoy DC6 t se .
    · Share on FacebookShare on Twitter
  • ohskigod
    ohskigod Posts: 6,505
    edited February 2006
    looks like a good build. that is for the home right? (I hope so)
    I'm thinking a grill for the front would finish it off well. Unless you dig the blue :D
    Living Room 2 Channel -
    Wiim Ultra. Jolida CD player. Fiio k11 R2R DAC, XTZ as300 Edge amp. Focal Cobalt 826 towers,

    Upstairs 2 Channel Rig -
    Classe Audio 5 Preamp, DIY1200as2 Icepower Amp x 2, Wiim pro streamer and Topping E70 Velvet DAC, California Audio Labs DX1 CD player, Polk LSi15's with MM840 woofer upgrade.

    Studio Rig - Scarlett 18i20(Gen3) DAW, Schitt Saga 2 preamp, Topping a90 headphone amp, Mac Mini, Audiophonics Hypex NC252m amp, Polk r200's
    · Share on FacebookShare on Twitter
  • ward91
    ward91 Posts: 338
    edited February 2006
    i supose a grill would cover up the bits in the screws that the paint wouldnt get to
    ELECTRONICS
    arcam cd93
    linn wakonda
    MC2 MC450
    Teac ud h01 DAC


    SPEAKERS
    Tannoy DC6 t se .
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 29,384
    edited February 2006
    Take the screws out, get a counter sink - counter sink the holes, put the screws back in there - then buy/make you some pegs, then saw them off or sand them down - I saw mine off, then I sand them down to cut down on the amount of sanding...

    This will allow you to hide the screws if you dont want to put a grill on there...
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter