Is Armaflex still available?

ratpin · April 6

I see a lot of people recommending this product to help seal up the cabinets. I just finished installing hurricane nuts while I wait for my crossovers. Can someone provide a link to the correct type and thickness if it’s still available? Thanks.

pitdogg2 · April 6

Home depot has it. Yes it is available. It's a plumbing pipe wrap.
https://www.homedepot.com/p/Armacell-2-in-x-30-ft-R-1-Foam-Insulation-Tape-TAP18230/100539553
Adhesive side to the driver NOT the cabinet. Overlap a bit and cut on the diagonal to avoid air leaks.
I use an old soldering iron to burn screw/bolt hole to avoid it twisting under the flange.

ratpin · April 6

pitdogg2 wrote: »

Home depot has it. Yes it is available. It's a plumbing pipe wrap.
https://www.homedepot.com/p/Armacell-2-in-x-30-ft-R-1-Foam-Insulation-Tape-TAP18230/100539553
Adhesive side to the driver NOT the cabinet. Overlap a bit and cut on the diagonal to avoid air leaks.
I use an old soldering iron to burn screw/bolt hole to avoid it twisting under the flange.

Perfect! That’s what i was looking at.

Thanks dogg

ratpin · April 6

Is this still worth the effort if all my original gaskets are good?

Toolfan66 · April 6

ratpin wrote: »

Is this still worth the effort if all my original gaskets are good?

No, use the old gaskets..

pitdogg2 · April 6

Toolfan66 wrote: »

No, use the old gaskets..

This^^^^

F1nut · April 6

NO!!!!!!!!!

Is Armaflex still available?

Comments