CS 350 LS

xjghost
xjghost Posts: 1,115
in Wanted (WTB) Classifieds
Looking for a driver for my CS350 center. One appears to have magnetic shifted. 3 of the 4 move and one is locked up. Any help would be appreciated. Haven’t pulled it to see what the number is.
HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

Additional projects: RTA 12c's
· Share on FacebookShare on Twitter

Comments

  • la2vegas
    la2vegas Posts: 762
    I'll check the boneyard tomorrow morning. Where are you located in the event that I have any spares?
    · Share on FacebookShare on Twitter
  • xjghost
    xjghost Posts: 1,115
    South Carolina. Gladly pay for it and shipping.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on FacebookShare on Twitter
  • la2vegas
    la2vegas Posts: 762
    Well it appears that I do have a few of these in the parts bin. Please verify that the model number is the same. I apologize for the driver being so dusty, they have been stored for several years. 186y1y52iwo0.jpg
    i1mqo41hmgz1.jpg

    · Share on FacebookShare on Twitter
  • xjghost
    xjghost Posts: 1,115
    Ok pulled the driver. And it’s a 4802. Maybe I need to pull the others and confirm.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on FacebookShare on Twitter
  • xjghost
    xjghost Posts: 1,115
    jt1egh6g0yx2.jpeg
    fnu7aenwcktf.jpeg
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on FacebookShare on Twitter
  • la2vegas
    la2vegas Posts: 762
    I'll check to see if I have any drivers matching your 4802 tomorrow. Hopefully we'll have a match.
    · Share on FacebookShare on Twitter
  • la2vegas
    la2vegas Posts: 762
    Well I checked the other 3 drivers that I have and they're all 4850's.

    I'm not sure if they're interchangeable. Perhaps someone with more knowledge on the subject can chime in.
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    i7e1ftwswec5.png
    Buy this OR look for better deals & have spare parts
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    mu5ufaxeq6jw.png
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    There may be more. I didn't look far
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 26,917
    edited January 2024
    MW4850 is the correct driver for the CS350. Both of mine have the same drivers Jose.

    All mine look just like this.
    la2vegas wrote: »
    186y1y52iwo0.jpg
    [/img]

    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Ivan is there a difference between cs350 n cs350ls ? I don't know much about them
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 26,917
    edited January 2024
    They were part of the LS series so no.
    Cs350/cs350ls are the same speaker
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Got ya. Thx. I tried researching it earlier. But gave up. Heck I can't remember what MWs are in my cs1000p they may even be same. Not much info out there
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • xjghost
    xjghost Posts: 1,115
    I looked on eBay last night and didn't find that one. I did find hole speakers though. Hence coming here. Oh well Ordered one just now off eBay.
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on FacebookShare on Twitter
  • xjghost
    xjghost Posts: 1,115
    Ok so this one speaker will not move while the others do. I assumed a magnet shifted but in an effort to learn here from what I remember a speaker has a part that "floats" inside and the movement makes the sound. I know over simplified. So I guess the voice coil lost it's ability to move. Any thoughts on what is going on with this one speaker?
    HT/2Channel: Emotiva MMC-1, Adcom GFA-555II, Polk SDA 3.1's, Teac TN-300 TT, Polk Center and Sub.

    Bedroom system: Carver CT-24, Parasound HCA-800II, Monitor 10's

    Additional projects: RTA 12c's
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    Everything is aligned & once the magnet shifts or burns up the voice coils it is toasted
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    v2q2h185a6sw.png
    wvq7eu6rok8u.png
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter
  • boston1450
    boston1450 Posts: 7,758
    This is just speakers in general. I have a better diagram at home that shows & explains more in details. It is posted here on forum as well
    Randy-Maine
    2ch-RTA15tl crossover upgrade
    by David WMG
    Yamaha cr1000 cr2040
    HT-Yamaha Parasound Acurus
    MIT BJC Cs1000p Polk Rotation
    · Share on FacebookShare on Twitter