Cable modem, router for sale (both NetGear)

Options
polrbehr
polrbehr Posts: 2,826
edited May 2022 in For Sale (FS) Classifieds
I'm putting these items up for consideration - NetGear AC3200 router
NetGear CM600 cable modem
Modem was purchased about a year ago, router about 3 years ago? I don't have the original boxes or paperwork but there is plenty of documentation out there. I do have the original power supplies for both. They have
both been reset to factory defaults and were updated with latest firmware about 2 months ago. They work exactly as they should, and easily covered my entire house with very good signals (approx 1600 sq ft); I used the 400Mbps plan from Optimum.
Only reason for selling is I upgraded to Optimum Fiber internet and have to use their equipment.

I would really like to sell them as a set, let's say Polkie price $120 shipped/insured CONUS? Any questions feel free to PM or email me here -> polrbehr at optonline.net
So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


http://audiomilitia.proboards.com/
· Share on FacebookShare on Twitter

Comments

  • gp4jesus
    gp4jesus Posts: 1,969
    Options
    I could see requiring their modem to convert the light pulses into the electrical signal, but their router too.

    Tony: retired AT&T fiber splicer
    Samsung 60" UN60ES6100 LED Outlaw Audio 976 Pre/Pro Samsung BDP, Amazon Firestick, Phillips CD Changer Canare 14 ga - LCR tweeters inside*; Ctr Ch outside BJC 10 ga - LCR mids, inside* & out 8 ga Powerline: LR woofers, inside* & out *soldered LR: Tri-amped RTi A7 w/Rotels. Woofers - 980BX; Tweets & “Plugged*” Mids - 981, connected w/MP Premiere ICs Ctr Ch: Rotel RB981 -> Bi-amped CSi A6 Surrounds: Premiere ICs ->Rotel 981 -> AR 12 ga -> RTi A3. 5 Subs: Sunfire True SW Signature -> LFE & Ctr Ch; 4 Audio Pro Evidence @ the “Corners”. Power Conditioning & Distribution: 4 dedicated 20A feeds; APC H15; 5 Furman Miniport 20s *Xschop's handy work
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    The first thing I did was try to figure a way to ditch their gear, but it seems like I have to keep the modem/router combo (and the corresponding $10/month "rental" :(), they don't offer separates.
    I was told I could keep the router in the loop, but the one that's included covers my house pretty
    well and they even gave me a mesh extender at no extra charge - I may use that to boost outdoor
    WiFi signals, but for now I get consistent 300Mbps ^ & v with the standalone, so I figured someone
    else could make use of my NetGear stuff.

    FYI, I also ran Cat5e to almost every room in the house over the years, I try to keep anything that can
    be directly connected via ethernet, connected in this manner. It makes for almost instant Netflix streaming...

    Thanks for the input though, now that I know you know what you're talking about, you can expect PMs
    from me LOL
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    One and only price drop to $100 shipped CONUS, this modem by itself cost almost that much a year ago.

    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • smartie_panta
    smartie_panta Posts: 185
    Options
    @gp4jesus I have AT&T Internet (legacy U-Verse), and like @polrbehr they tell me I have to use their "gateway," which is a combo modem and router. Assuming I want to stay with AT&T, is there a better way?

    Sorry @polrbehr , I don't mean to hijack your post. If I could buy them, I would. It's a great deal!
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    No sweat, I will always accept a free bump to the top LOL

    And believe me, if I could keep them, I would; they worked very well together.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    I said one and only price drop. I lied. Will let these go to a Polkie (you all know the criteria) for $50 plus actual shipping to CONUS.

    I figured if someone who wanted @treitz3 deal (killer, BTW) but didn't make it onto Santa's nice list, I'll bump this back in case someone can use them. Sorry, no splitty deez, package deal. PM me with interest or questions, or post them here, it's fine with me.


    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • pitdogg2
    pitdogg2 Posts: 24,579
    Options
    I'm interested Harry.
    · Share on FacebookShare on Twitter
  • msg
    msg Posts: 9,461
    Options
    smartie_panta wrote: »
    @gp4jesus I have AT&T Internet (legacy U-Verse), and like @polrbehr they tell me I have to use their "gateway," which is a combo modem and router. Assuming I want to stay with AT&T, is there a better way?

    Sorry @polrbehr , I don't mean to hijack your post. If I could buy them, I would. It's a great deal!

    If you wanted to use your own router, you would call support and ask this question: "Is there a way we can configure the [service] modem/router for bridge mode so that I can use my own router and internal network equipment?"

    I disabled signatures.
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    He might've been in the same storm but in a different boat as me, @msg. I was never told I couldn't use my own router, only that their combo was what had to be in place with fiber. FWIW, their equipment is not all bad, but it is very user unfriendly - can't even change the default WiFi password, which I still don't understand. But since I was paying the $10/month rental anyway, and couldn't use the modem, I figured I would sell both.

    Which by the way, is done. This will be on it's way to @pitdogg2 tomorrow.


    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,041
    Options
    So when I switch to fiber, the reps really botched the terminology of what its involved.

    Fiber doesn't use a modem. It uses an ONT. Optical network terminal. This converts optical to ethernet. After this it simply goes to a router of your choosing.

    They kept calling the router the modem in my discussions which created vast confusion.

    The aftermarket ONT market is not really there so I kept what they gave me and went with a linear power supply no problems.

    Good luck with the sale
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    I would have been ok with that. The first thing I did was look to buy whatever they were renting me, but the ONT Optimum uses seems to be proprietary and all-in-one. If my wifi speed wasn't good, I would've tried the router I had before because it worked great. But the choices were limited; go with their fiber gear, or go back to RG6. Only plus is they give you one mesh extender included in the monthly charge, so I have no dead spots anywhere.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • VR3
    VR3 Posts: 28,041
    Options
    What's the model of the unit they give you
    - Not Tom ::::::: Any system can play Diana Krall. Only the best can play Limp Bizkit.
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    All I can see on the label besides MAC address, network name, etc. is - Fiber Gateway GR140DG

    That's it, no mfr. info at all. They probably don't want people replacing them on their own.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • msg
    msg Posts: 9,461
    edited December 2023
    Options
    polrbehr wrote: »
    I would have been ok with that. The first thing I did was look to buy whatever they were renting me, but the ONT Optimum uses seems to be proprietary and all-in-one. If my wifi speed wasn't good, I would've tried the router I had before because it worked great. But the choices were limited; go with their fiber gear, or go back to RG6. Only plus is they give you one mesh extender included in the monthly charge, so I have no dead spots anywhere.
    Interesting.

    Looks like it may be a product by a Portuguese company, Altice Labs.
    https://www.manualslib.com/manual/2813270/Altice-Labs-Fgw-Gr140dg-Wi-Fi-6.html

    With typical combo modem/router devices, the private side can be configured for bridge mode, or "pass through". Quick skim of that manual shows a bunch of different device types in the family. Could be that that ONT Gateway doesn't allow for this configuration. I can't quite tell from skimming.

    There's a workaround for this sort of thing in cases where you're not just getting an "ethernet hand-off" like Trey is, but it's not optimal, and it sounds like your coverage and speed is acceptable now with their extender.

    One work around would be to disable the ONT Gateway's Wi-Fi, and set your own router to AP mode (Access Point). Then, plug your router into one of the ONT Gateway's LAN ports. There are a couple of other things one may want to consider here, but it complicates this response.

    There are a couple of issues with this. First, it's two pieces of gear for the private side, and can introduce a little lag. It can also be buggy, and go unresponsive, requiring resets and such.

    The main issue with this for most people, presuming that the ISP even allows access, is that the user still doesn't necessarily maintain control over or know how to control the device security.

    Another consideration is port forwarding configuration to make internal services accessible to external requests, if that's something a person needs. Again, admin access to the ISP's device would be required.

    I can see how/why ISPs would use a combo device like this by default for most subscribers. It looks like they're designed to provide bundled services from a single point - internet, voice, and TV in some cases.

    https://www.verizon.com/support/knowledge-base-301824/#:~:text=IP passthrough allows you to,enabled upon disabling IP passthrough)

    https://kb.netgear.com/30186/What-is-double-NAT-and-why-is-it-bad

    https://kb.netgear.com/30187/My-NETGEAR-or-Orbi-router-is-connected-to-an-ISP-gateway-or-another-router-and-it-s-causing-double-NAT-problems-How-do-I-fix-them

    https://kb.netgear.com/20927/How-do-I-change-my-NETGEAR-router-to-AP-mode

    I disabled signatures.
    · Share on FacebookShare on Twitter
  • polrbehr
    polrbehr Posts: 2,826
    Options
    @msg, what you said is true, ALtice Labs owns Optimum so that makes sense now. But I am fine with the speeds I'm getting, also the coverage with the ONT all-in-one w/mesh extender. And it can provide internet/CATV/VOIP, in fact their new CATV boxes are designed to just work off WiFi though all mine are hard wired anyway (the kid doing the installation was really surprised by this). My only complaint is I hated paying $10 monthly "rentals", which is why I bought the modem and router I am now selling! So it's back to the rental thing. I don't even know if I would go through the trouble again of getting another router unless I could change settings; it took me quite awhile to change every single wireless device we have to work with the new router.
    So, are you willing to put forth a little effort or are you happy sitting in your skeptical poo pile?


    http://audiomilitia.proboards.com/
    · Share on FacebookShare on Twitter
  • treitz3
    treitz3 Posts: 18,334
    Options
    polrbehr wrote: »
    I figured if someone who wanted @treitz3 deal (killer, BTW) but didn't make it onto Santa's nice list, I'll bump this back in case someone can use them.

    Sorry about that bro'.

    Tom

    ~ In search of accurate reproduction of music. Real sound is my reference and while perfection may not be attainable? If I chase it, I might just catch excellence. ~
    · Share on FacebookShare on Twitter