WTB used inexpensive SL2000 tweeter

jurni
jurni Posts: 2
edited April 2020 in Wanted (WTB) Classifieds
I'm looking for an inexpensive SL2000, I have a single left SDA II with a blown tweeter that I'd like to replace. I dont have the matching right speaker so it's not worth it for me to upgrade to the RDO tweeter, but if you upgraded, I would love to have your old working SL2000. Joanroco70@gmail.com, CA.

Comments

  • nakdoc
    nakdoc Posts: 2
    If the tweeter was not toasted by some head-banger, a bit of delicate soldering work between the lead in and the voice coil itself may repair it. The job is only for someone with good soldering skills and a steady hand. I've repaired two tweeters in the past and failed on a third.
  • SDA1C
    SDA1C Posts: 2,069
    IDK your definition of inexpensive. DO you not care to use the new silk dome replacement?
    Too much **** to list....
  • msg
    msg Posts: 9,306
    F1nut wrote: »
    What use is a single SDA speaker?

    For center channel? On its side?
    I disabled signatures.
  • jdjohn
    jdjohn Posts: 2,987
    Well, darn...I had an expensive one to sell, but not an inexpensive one. Plus, I'm only 9 months too late.
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • skrol
    skrol Posts: 3,330
    edited January 2021
    I have a couple good ones available from my Monitor 5B that I replaced with RD0194. PM sent.
    Stan

    Main 2ch:
    Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.

    HT:
    Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60

    Other stuff:
    Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601
  • ken brydson
    ken brydson Posts: 8,638
    Guys, this thread is almost a year old. The OP is long gone.
  • dromunds
    dromunds Posts: 9,969
    Literally a one-hit wonder
  • SDA1C
    SDA1C Posts: 2,069
    Thats crazy it is that old, and it was still on the second page. Looks like this forum has slowed considerably.
    Too much **** to list....
  • pitdogg2
    pitdogg2 Posts: 24,471
  • jdjohn
    jdjohn Posts: 2,987
    Well...second page of the 'WTB' section. The 'FS' section has been quite active.
    "This may not matter to you, but it does to me for various reasons, many of them illogical or irrational, but the vinyl hobby is not really logical or rational..." - member on Vinyl Engine
    "Sometimes I do what I want to do. The rest of the time, I do what I have to." - Cicero, in Gladiator
    Regarding collectibles: "It's not who gets it. It's who gets stuck with it." - Jimmy Fallon
  • SDA1C
    SDA1C Posts: 2,069
    6uq3wm6q9mg6.jpeg
    just trying to be nice. you know how hard that is for me to do...
    Too much **** to list....
  • dromunds
    dromunds Posts: 9,969
    Confusing us with AR-15 specifications that aren’t speakers is just plain abusive. 😈
  • skrol
    skrol Posts: 3,330
    Guys, this thread is almost a year old. The OP is long gone.

    So I guess he doesn't need them anymore :'( ?
    Stan

    Main 2ch:
    Polk LSi15 (DB840 upgrade), Parasound: P/LD-1100, HCA-1000A; Denon: DVD-2910, DRM-800A; Benchmark DAC1, Monster HTS3600-MKII, Grado SR-225i; Technics SL-J2, Parasound PPH-100.

    HT:
    Marantz SR7010, Polk: RTA11TL (RDO198-1, XO and Damping Upgrades), S4, CS250, PSW110 , Marantz UD5005, Pioneer PL-530, Panasonic TC-P42S60

    Other stuff:
    Denon: DRA-835R, AVR-888, DCD-660, DRM-700A, DRR-780; Polk: S8, Monitor 5A, 5B, TSi100, RM7, PSW10 (DXi104 upgrade); Pioneer: CT-6R; Onkyo CP-1046F; Ortofon OM5E, Marantz: PM5004, CD5004, CDR-615; Parasound C/PT-600, HCA-800ii, Sony CDP-650ESD, Technics SA 5070, B&W DM601
  • SDA1C
    SDA1C Posts: 2,069
    The pair of 2000 in the pic came out of a minty set of 5jr+. Some might remember that I gave them to my neighbor when we lived in Illinois. When he found we were moving he gave them back saying he just wanted to sit in the 2.3, Sunfire room one more time before we left. He was the coolest ol man I've ever met. Lost 95% of his holdings in Florida to Bernie Madoff and still had a 2500$ golf bag lolol. He also gave me a 14x28 render of the ironworkers beam over the empire state building. Mr. Frank Galeitzia.
    Too much **** to list....
  • xschop
    xschop Posts: 4,635
    PM if you don't have a need for the SL2000 set. I have a set of mirror-polished plates, I just need the magnets.
    Don't take experimental gene therapies from known eugenicists.
  • pitdogg2
    pitdogg2 Posts: 24,471
    I have like 10. Some (1or2) VC is cooked but that won't matter.
  • xschop
    xschop Posts: 4,635
    Send me a PM and let me know what you need to get them shipped to 73012. I just need magnets if you can just tape over the pole-pieces to keep dust out. Thanks Pitt.
    Don't take experimental gene therapies from known eugenicists.
  • xschop
    xschop Posts: 4,635
    Thanks Pitt. Those magnets showed up in-tact.
    Don't take experimental gene therapies from known eugenicists.