Parasound A21+

Options
Good people of PF

Anyone had experience with this “+” version of the A21?
Thoughts?
«13

Comments

  • Clipdat
    Clipdat Posts: 13,106
    Options
    I heard that the Benchmark AHB2 is better.
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Lol. Thank You Drew for your input. However I asked if anyone had “experience” with this amp, not opinions...
  • Clipdat
    Clipdat Posts: 13,106
    edited September 2020
    Options
    I'm going to reach out to my contact at Parasound to see if he can share any first hand listening impressions on the A21 vs the A21+ or about the A21+ in general.
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Thank You señor
  • maxward
    maxward Posts: 1,744
    Options
    Oh, that’s right. We know someone who knows someone!
  • Clipdat
    Clipdat Posts: 13,106
    Options
    Yes! Phil Jackson at Parasound is a class act, great guy.
  • Clipdat
    Clipdat Posts: 13,106
    edited September 2020
    Options
    Guts:
    a21+inside_300.jpg
    Rear panel:
    A21PlusC.jpg?v=1569323752
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Stunning
  • maxward
    maxward Posts: 1,744
    Options
    That is an impressive build.
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Sold!
  • DaveHo
    DaveHo Posts: 3,585
    Options
    And they said I was easy!
  • pearsall001
    Options
    If you have a chance to listen at a dealer see if they have a Parasound Zone Master 2350 on hand to compare. I had multiple listening sessions comparing tha A21+, A23+ & the ZM 2350. All were driving the incredible & I mean incredible KEF Reference 3 & Reference 5 speakers.
    I own the KEF R3 monitors so I am very familiar with the KEF signature.
    When all was said & done the ZM 2350 was the one I went home with.
    It is a class D but with Parasounds analog stage. There in lies it's magic. Even the guys at Parasound will tell you that the ZM 2350 is a real sleeper in their line.
    From what I understand the new A21+ & A23+ bring a lot more to the table than their predisesters.
    As usual when it comes to all things in audio everyone's mileage will vary.
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Thanks for your feedback.
    The part I’m interested in is the pure Class A- A/B as It gives me the best of both worlds.
    Coming from Class D, I am familiar with that power. But I also have a P6 pre. So that’s only going to add to the synergy
  • Mike Reeter
    Options
    FWIW, The Binding Posts on the later Halo Series are the best I've had experienced. Large Spade connectors slip into a 'slot' on the bottom edge of the Posts. The Spades are held in place by the Posts with no lateral movement, they lock in SOLID.

  • pitdogg2
    pitdogg2 Posts: 27,914
    Options
    Just buy the JC5 and be done. I still regret not buying the HCA 3500 here when I had a chance. That for me is the one that got away.
  • gyosa
    gyosa Posts: 770
    Options
    I have an A21 driving my 1C’s ....
    Love it !

    I also have used it with my Salks, and its fantastic there as well .

    I’m sure the + version is even better , but not sure you’d hear the difference - it’s basically the same amp internally with 50 more watts.

    Output current remains the same at 60 amperes.
    Filter caps go from 100,000 to 108,000 , although their website says 88 to 108 - but the 88 is the earlier A21’s - the later ones had 100.

    Bk

    PS Audio S300 , WiiM Ultra , Yamaha wxc-50 , Salk SuperCharged Songtowers , Kimber Kable 4TC, Sony 48” - BEDROOM

    B&K EX-442 ( it will go in my casket when I die ... ) , PS Audio 4.6 preamp ( old school , but it still jams on ... ) , Eversolo DMP-A6 , Boston Acoustic voyager 7’s - POOL

    Parasound A21, Eversolo DMP-A8 , Kimber Kable 4vs , Ascend Acoustics ELX Ribbon Towers , Sony XBR-A8F 65” OLED - DEN , MAIN system

    Onkyo TX-nr609 , Polk atrium 7 , Boston acoustic sound ware (4) , Boston acoustic sub , B&W center , Sony 65” TV - PATIO
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Looking forward to it.
  • BlueBirdMusic
    Options
    @pitdogg2,
    I remembered seeing this HCA-3500 on US Audio Mart a few days ago, and here it is below. When I saw the listing, I looked at the details because I had never seen one. How does the price on this one compare to the one you let slip through your hands?

    All of these Parasound amps are impressive, and I am sure Joe will like his new one.

    https://www.usaudiomart.com/details/649652705-parasound-hca-3500-amplifier-the-holy-grail-2-x-350-wpc-8-into-ohms-john-curl-design/
    7a747r0ckc1b.png

    "Sometimes you have to look to the past to understand where you are going in the future"
    Harry / Marietta GA
    m9iutt1ly1yd.png
  • Emlyn
    Emlyn Posts: 4,920
    Options
    I used to see those HCA-3500s often being sold for around $1K to $1.5K more than ten years ago. The two power cord thing is pretty cool.

    They are old enough now they may need some fine tuning inside.
  • pitdogg2
    pitdogg2 Posts: 27,914
    Options
    Yep Emlyn is in the park. The US audio mart is a bit high unless its been recapped.
    IIRC it was Doros and he wanted less than 1500.00. They are actually basically a first generation JC amp.
  • joecoulson
    joecoulson Posts: 4,986
    Options
    So the eagle has landed.
    Plugged in and started the break in process.
    I do like what I am hearing. Especially at lower levels.

    oteot6x4pql6.jpeg
  • Tony M
    Tony M Posts: 12,032
    Options
    B) !!!
    Most people just listen to music and watch movies. I EXPERIENCE them.

    “Anger is an acid that can do more harm to the vessel in which it is stored than to anything on which it is poured.”
    --Mark Twain.

    “If at first you don't succeed, then skydiving definitely isn't for you.” - Steven Wright
  • joecoulson
    joecoulson Posts: 4,986
    Options
    I will leave my review for after break in

    As far as how the thing looks and the tech, outstanding!
    Built like a tank and very clean finishes.
    Here are some outside shots:

    e9rnkraklcix.jpeg
    28bx38ghxrop.jpeg
    qkn2wiwe9rj4.jpeg


    The inside is just as beautiful, popped the top (as most of you know I am prone to do) and took some guts pix

    24cgnuqp650c.jpeg
    aiotppbccrkn.jpeg
    42tit72cf24i.jpeg
    vf61m22tdua6.jpeg

    And one last one for reference. That transformer is massive. Taller than it is wide.

    1pvqdarie02c.jpeg
  • invalid
    invalid Posts: 1,560
    Options
    What gauge is that wire, I'm assuming it's the output wire, is it 10 gauge?
  • joecoulson
    joecoulson Posts: 4,986
    Options
    Not sure
  • Clipdat
    Clipdat Posts: 13,106
    Options
    These?

    py6uc2bdydoe.png

    Those are running from the input/pre board to the main board. Looks more like 14ga to me.
  • invalid
    invalid Posts: 1,560
    Options
    The camera must add 10 lbs then, they looked thicker in the picture. Nice amp.
  • Clipdat
    Clipdat Posts: 13,106
    Options
    I've thought about asking Parasound for a JC5 to review, but I don't want a herniated disc from trying to put it on top of my rack.
  • pitdogg2
    pitdogg2 Posts: 27,914
    Options
    Clipdat wrote: »
    I've thought about asking Parasound for a JC5 to review, but I don't want a herniated disc from trying to put it on top of my rack.

    Leave it on the floor ;)