Sand Filled Speaker Stands
Options
Polkaguy58
Posts: 352
I came up with a easy way to fill those tiny loading holes.
Just a regular sized auto funnel and a threaded metal tube from a standard lamp base.
I put a nut on one end of the tube and dropped the other into the funnel hole.
The nut keeps it from falling through.
I was able to drop the tube down into the three different legs and the sand flowed quite well.
I used an old coffee cup to scoop up the sand and it only took about a minute to load.
Just a regular sized auto funnel and a threaded metal tube from a standard lamp base.
I put a nut on one end of the tube and dropped the other into the funnel hole.
The nut keeps it from falling through.
I was able to drop the tube down into the three different legs and the sand flowed quite well.
I used an old coffee cup to scoop up the sand and it only took about a minute to load.
Comments
-
Not sure if it would still flow as well through the tube, but I like to do 50/50 sand and lead shot or BBs for the bottom third.George / NJ
Polk 7B main speakers, std. mods+ (1979, orig owner)
Martin Logan Dynamo sub w/6ft 14awg Power Cord
Crown D150 amp
Logitech Squeezebox Touch Streamer w/EDO applet
iFi nano iDSD DAC
iPurifier3
iDefender w/ iPower PS
Custom Steve Wilson 1m UPOCC Interconnect
iFi Mercury 0.5m OFHC continuous cast copper USB cable
Custom Ribbon Speaker Cables, 5ft long, 4N Copper, 14awg, ultra low inductance
Custom Vibration Isolation Speaker Stands and Sub Platform
